Can I set the property to any system of my application

Similar Questions

• Can't set the fax modem in Win Fax & scanning. I get the error "an error has occurred. Try again or contact your system administrator. »

  Original title: can't set the fax modem in Win Fax & scanning

  I have install Vista Pro on my laptop at home with me and wife that both put in place as administrators. I recently reinstalled (Clean) Windows Vista and am trying to reload all data and software.

  I have successfully set up Win Fax under my account and power send & receive faxes, but when I tried to put in place the fax under my wife account I get the error prompt:

  "An error has occurred. Try again or contact your system administrator. »

  Prior to the re - install, I have had no trouble creating and directing Win Fax in both accounts.

  I tried to remove and re-create the account of my wife, but all without success. It is a major pain because it is my wife who is the main user of the service of fax for his work.

  Help, please...

  Hi HamptonBirds,
   
  (1) what is the brand and model of your fax machine?
   
  Follow these steps in the order of appearance and check if it helps to solve the problem.
   
  Step 1:
   
  Verify that the following services are defined as follows, and you can start each service:
   
  a. click on start
  b. in the type of search option 'services '.
  c. now, make sure that the services below are the following:
   
  Connections - Manual
  Telephony - manual
  Remote access connection manager - Manual
  COM + Event System - Manual
  Remote Access Auto Connection Manager - manual
   
  Step 2:
   
  Turn off ADM (Windows Fax and Scan)
   
  a. click on start
   
  (b) in the search box, type "regedit".
   
  c. find HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts, delete all the keys to void.
  
  d. run WFS high the first time. This should allow to recreate the appropriate accounts.
   
  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• How can I set the jumpers on a (thin) teac cd-244e?

  I have an optiplex gx240-SFF I installed a thin teac cd-244e on (pc seems to have had no prior installation CD-ROM). I am running win2000pro. My system does not recognize the cd-rom drive in the BIOS or anywhere else.  Some say it is due to the configuration of the jumpers on the drive, but I don't see any rider on this SLIM drive. How can I set the jumpers?

  
  

• How can I use the property of a node that is not related in a formula?

  Hello Experts,

  I need help with a formula.  I want to set a property 'Y', according to the following conditions:

  Node = XX_1234 - this is the node whose property we want to update 'Y '.

  Node = 1234 life elsewhere in the same hierarchy.  1234 node has a property called Custom.XX_Account and under certain conditions this property can be null, or it can be "filled with XX_1234 in the case of my example.

  I want to set the property indicator = 'Y' for node XX_1234 when Custom.XX_Account property node 1234 = "XX_1234."

  I know that substring off the "XX_' of my node (XX_1234) but I don't know how to find a property to another node (not related).

  Help and recommendations are greatly appreciated!

  See you soon!

  Hello

  I think that after reading your two previous posts on PQRS account (where P, Q, R, S are many) you have a XX_Account property (where XX_ is a fixed prefix?) and this property can have only two values (NULL or XX_Abbrev()).

  If (and)

  Equals (String, SUBSTRING (ABBREV (), 1, 3), XX_),

  NodeInHier (SubString (Abbrev (), 4, PropValue (Core.HierName), Length (Abbrev (())))).

  If)

  Equals (String, NodePropValue (Substring (ABBREV (), 4, length (ABBREV (())), Custom.XX_Account), ABBREV ()),

  THERE, XXX))

  (Where XXX is the Else condition you specify wana)

  I'm hoping to have read your request correctly and it helps.

  Thank you

  Denzz

• E430 - no internet - but can connect to the network. Any idea?

  Hi, I had a really frustrating problem.

  I can connect to wireless and wired networks, but in both cases, after about 5 minutes, I can't surf the internet (on any browser) for about 10 minutes and none of my programs who need internet access. I had the same problem at home, school and work.

  I tried windows 7 convenience store and all he says is that "the diagnostics policy service does not work" and "explore additional options.

  I tried to reinstall the netwrok card, no luck.

  Can anyone think of anything whatsoever?

  Thanks in advance!

  I have windows 7 64-bit of the E430

  Try to reinstall ThinkVantage Access Connections and let me know if that helps (use this link, under ThinkVantage Technology):

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073272

  I would also like to launch ThinkVantage System Update from the same page.

• Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  N °

  (143905)

• How can I set the default download locations

  How can I set the default download locations?

  You can watch here:

  • Tools > Options > general: downloads
  • https://support.Mozilla.org/KB/downloads+window

• CAN´t set the duration of an appointment in the iCloud between Outlook 2013 calendar

  Hello, I have can´t set the duration of an appointment in the iCloud calendar between Outlook 2013, when I want to set the time, it just made me put ¨am¨, I can´t create it after midday (¨pm¨).

  Hope someone of you can help me.

  THX

  Hey Bernaragon,

  I understand that you are having problems with the creation of a calendar to your iCloud account in Outlook. Let's see if we can get smooth it.

  For most of the problems with iCloud for Windows can be solved in two steps of troubleshooting. The first being to toggle synchronization of calendar and then put it back in the iCloud for Windows app. The second being would ensure that the Add on Outlook to iCloud is turned on. Take a look at the article below for more details on how to do these steps.

  Get help using Outlook with iCloud for Windows
  https://support.Apple.com/en-us/HT204571

  Let me know helps fifths.

  Take it easy

• I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen.

  Problem with the size of the text

  I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen. Evil in my sight.

  Inhabitant of the desert

  Is this a comment or a question? If a question, care to share with us, what e-mail program you speak?

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• How can I set the format of Windows Media Center at 16:10 in other than the full screen?

  How can I set the format of Windows Media Center in Vista at 16:10 in other than the full screen? I use a screen as secondary display 1680x1050px.

  Hello, YPOC

  It is not possible to change the proportions for Media Center in windowed mode.

  The aspect ratio has been changed in Windows 7 and uses a format screen mode to windowed.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• How can I set the time on the toolbar of the low wing? When I click on the taskbar do a right-click and then click Properties, it does not give me the option to display the time?

  How can I set the time display on the toolbar of the low wing?  When I click with the right button on the taskbar, and click show properties, it does not give me the options to display the time?  Where should I go in windows 7 to do this?  I clicked on the date and time also, and it does give me an option to add there either. Please help.

  Thank you

  How can I set the time display on the toolbar of the low wing?  When I click with the right button on the taskbar, and click show properties, it does not give me the options to display the time?  Where should I go in windows 7 to do this?  I clicked on the date and time also, and it does give me an option to add there either. Please help.

  Thank you

  Right-click the taskbar, and then select Properties. On taskbar you of the tab, click Customize. Scroll to the clock and change the "behaviours" on it.

• where can I find the cookies in my system?

  where can I find the cookies in my system? I want to access.

  Hello Jeet13,

  Be a little more specific on Palcouk response:

  1. open Internet explorer.

  2. in the upper right corner of the Windows Explorer home page, click the gear next to the star and the Home icon, and then click Internet Options.

  3. in the Internet option on the general tab, search for history of navigation.

  4. click on the settings button.

  5. in the settings window, click the view files button.

  6. a new window opens with a list of all the temporary internet files now.

  7. cookies will be labeled something like: cookie:@ for example: google

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com