Can I synchronize and AI on USB-6009 with meter?

Similar Questions

• With the help of USB-6009 with LabView 8.0

  I try to use a USB-6009 with LabView 8.0 box.  I DAQmx 8.8 (that came with the unit) installed and verified that the 6009 works correctly through MAX I also read on this site that the 6009 is compatible with LabView 7 or more.  However, I am unable to get LabView to recognize the device.  Using LabView, to use a DAQ hardware I have to select "Input" in the palette 'Functions'  But there is no range "Input".  Actually I can't find the DAQ Assistant Express VI anywhere.

  Do I need to use a different version of the DAQmx?  If so, which and where can I find it?

  Thank you.

  LabVIEW 8.0 is not supported with DAQmx 8.8. I think that the last version with support for 8.0 is DAQmx 8.6.1. You can uninstall 8.8 and install 8.6.1. You should really consider upgrading your version of LabVIEW. NOR has decided to limit support for 7.1 8.0 just now. The latest version of DAQmx manages to only 8.2.x and higher.

• I can't synchronize my iTunes on the iMac with my iPhone

  After the update to iOs 9.2.1 on my iPhone, I can't synchronize my iTunes on the iMac with my iPhone. My iMac uses Os X 10.6.8 version.

  I never had any problem before synchronization I updated my iPhone iOs. Could someone advise me? Thank you!

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of system you run, but as he himself is very obsolete.  It may or may not be possible to upgrade your computer to the system requirements:

  You can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• How can I save items on a USB key with Vista?

  original title: using Flash Drive

  How can I save items on a USB key with Vista

  Plug the Flash drive.  Go to start / computer and find your USB drive listed there.  Find what you want to record on the FlashDrive (from other units identified in Explorer) and copy / them (CTRL + C) and then go to your USB key and click it to open it and press Ctrl + V to paste the files.  That's all there is to it.  You can create folders to store files, like flash drives have limits on the number of files can be stored in the root directory (but not folders).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OR USB-6009 with op-amp to amplify the analogue output

  Hello.

  I use an NI USB-6009 data acquisition to send a signal to a proportional pressure regulator which varies the pressure of pneumatic system. Unfortunately, the controller of pressure requires a signal of order analog 0 - 10V and the 6009 can 0 - 5V.

  So I thought I'd build a small circuit with a gain of 2 to amplify the signal. See photos attached to a schema and the picture of the installation. The 741 operational amplifier is powered by a 24V DC power supply. 24V is a bit on the side high to the op-amp but I have this supply already built in and (using a supply of laboratory bench) the circuit works exactly the same in 12-18 v.

  Bascially, with voltages of entry of 5 up to 2 volts, the circuit behaves perfectly. The output is just the input multiplied by two.

  However, the output is never less than 3.9 volts (ish), regardless of the input voltage.

  Can anyone suggest a solution (or know where else to ask)? I really need to be able to control my production within the range of 1 - 10V.

  Thank you very much. John

  Yes, a LM358 should work.  You will not be able to get all the way up to 0 v, but it should get you up to 0, 5V or almost.  The LM358 is a dual op amp, then you will not be able to deposit into the same outlet as your 741.  You can probably get away with leaving half disconnected unused.  (Which is not true of all double operational amplifiers).

  Chris

• Measuring current using USB-6009 with a rheostat shunt resistance

  Hi all, I am an electronic engineering student doing my final year project. I am able to measure the current and voltage of a 9V battery, but not knowing the method that I use if it is correct.

  For the voltage, I have no problem getting it. But for the current, I connected a resistance of 1 k in parallel with the battery. When I run the program, I have a 9mA for battery. I understand when you use the DAQ assistant, for the installation of measuring current for USB-6009, that I need to specify as "external" shunt resistance and shunt resistance value (which is 1 k for the above experience).

  So, my question is when I use a rheostat as shunt resistance, what value should we indicate as a rheostat is a variable resistor, so it doesn't have a fixed value.

  Or the dimmer cannot be shunt resistance?

  Really need help and thank you for the reply.

  
  

• Synchronization and optimization of keithley-Labview with GPIB-USB

  I started an old thread on this subject, but I have some new problems. My vi is to control a Keithley sourceMeter to read measurements every 5 ms for 6 to 10 hours, using GPIB-USB. The vi simply sends the commands under a full script to the instrument and then bed measures (voltage and current) in a loop using the visa and saves the data and displays them in a second loop using a queue. I decided to use a queue and a second loop due to the delay caused by reading data, save them in a file + display, all in a single loop! I want to be able to see all the data with real time axis, so I used a xy chart.

  Having a shorter time in the upper loop isn't a bad idea.  Using the wait until the next ms multiple rather than just the Dequeue wait time can cause the occasional time jumps.

  I have no LV open now, so I'll try to remember your VI.  I think you picked up 3 data values and a timestamp of each 5 ms.  It is 800 items every second. If you want to save all the data but only write to the file every 5 seconds, you will have to accumulate 4000 items. Because file entries are not always made exactly when you ask them because of the behaviour of the OS, you must allocate a bit more wide open spaces.  You can initialize an array 2D as 1200 X 4 (1200 lines of 4 columns) of NaN. Place this table into a shift register.  Every time you Dequeue data, replace the next line with the data.  When you write to produce, use the subset of the array to get the part that was replaced with real data and write the part in the file.  Return the initialized array of NaN in the registry to offset and continue to replace the data.

  Lynn

• Can I download and install Windows 7 pro with a product key and the USB (No .iso or CD/DVD)

  So my hard drive failed, Dell can replace it but none of the software.  I have OEM Windows 7 pro and Office 2010 versions, which means that I (somewhere) product keys but not record.  Maybe Dell recover disk will work, but it's 7000 mile more away.  I've seen links to download install. ISO (I hope that its official?) but I would have no way to burn to CD, so my question is...

  Can I download a bit of Installer for Windows 7 Pro 64 to install from USB and my existing product key?
  
  
  What happened to Microsoft Office 2010 Home & student?
  Thanks for your help guys.
  Can I download a bit of Installer for Windows 7 Pro 64 to install from USB and my existing product key?
   
  Check out the link below for assistance on above:
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
   
   
   
  What happened to Microsoft Office 2010 Home & student?
   
  Check out the link below for assistance on above:
   
  http://Office.Microsoft.com/en-in/products/Microsoft-Office-2010-backup-FX101828860.aspx 

• Please, please, please help me find a recovery key. Without it I can not synchronize, and your instructions do not work!

  I click on the tab Firefox 'options' and then THERE IS NO 'Manage Account' and, therefore, WITHOUT KEY RECOVERY. Help me, please! My two computers are Windows: a Win7, a Win8. I spent hours and hours - in several sessions over a period of months - trying to solve this problem.

  Hello!

  You try to put in place two computers that are not in sync?

  Please follow the instructions described in this article: How can I set up Sync on my computer?

  You shouldn't need the key to recovery for her.

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• the scan can run under xp using a usb key with laser jet 2840 all in one

  I need ASSISTANCE IN MY 2840 ALL in a SINGLE WITH SWEEP. SAID NO HOOK UPWARDS. IUSING A USB KEY.

  Remove the cable first, make sure you have icons of printer in printers and faxes to this printer and make sure that you don't have another printer AiO or software, regardless of the HP, Brother, etc. If you have, you can choose one of the two. Download the full software from hp.com site and install that it will let you know when to plug the cable in and tada! Scan and everything works.

• Retail of Windows 7 can be installed and activated on your laptop with OEM 8.1?

  I have a laptop with Windows Pro 64 bit OEM 8.1. I used the HARD drive as a data disc and you plan to install a new HARD drive in it.

  Fortunately the laptop model is compatible with Windows 7 64 bit and all the drivers are available on the manufacturer's Web site.

  So even if I have OEM Windows 8.1 recovery USB, I would like to know if it is possible to do a clean install & activate a retail Windows 7 64 on it without any problems or complexities license?

  8.1 OEM key is embedded in the firmware, so it interferes with the installation of Windows 7 or help to install another OS like Windows 7 detail?

  Thank you.

  Yes, you can. See the instructions:

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Look at the dual-boot

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  Then follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• How can I synchronize tasks on my local machine with google?

  Is it possible and if so the synchronization of tasks I create in Thunderbird Lightning on my local pc, with tasks online on google?

  I gave you a link to google sync task use it. It is a support forum, not a general discussion forum if we love close subject as soon as POSSIBLE.

  The Flash synchronization is discussed here https://support.mozilla.org/en-US/kb/using-lightning-google-calendar?esab=a & s = lightning & r = 3 & as = s and it works very well for calendar items.

  The tasks are more difficult, because there is no standard of what a task is, for the synchronization of tasks to Google, yahoo, and Hotmail would require three programs and another for all other supported services. It is simply a maintenance nightmare that, for my part have nothing to do with.

• I can't synchronize my firefox on my laptop with my mobile phone?

  I created a firefox sync account, and then I tried to sync with my mobile phone. When I tried to punch in the code after clicking the pair a device he doesn't connect. I tried two ways to my laptop to mobile and Firefox on my laptop to my laptop. I do something?

  Please see these for more information. If you use the new synchronization please check the second link first.

  • How do I set up Sync on my computer?
  • Synchronize your bookmarks Firefox, history, passwords, etc.

  Please make sure that you successfully implemented a system with an account first. Try to add the second device.

• How can I synchronize my favorites of the device with Firefox for Android

  is it possible that I can sync.the bookmarks on my device with Firefox for Android

  Hello

  We have just implemented this in beta version of Firefox. So if you install it, you must go into the settings and at the bottom there is an import of point Android. A dialog box allows you to import bookmarks and history. It will be in the end V15.

  Thank you
  Michelle