Can I uninstall and reinstall my Windows Media Player 11?

Similar Questions

• How to uninstall and reinstall my windows media player?

  When I try to get info from the album I get an error message; An error has occurred in the script on this page.

  Line: 1

  Tank: 243

  Error: Automation server can't create object

  Code: 0

  URL: http://fai.music.metaservices.microsoft.com/FAI/scripts/default.js

  Do you want to continue running scripts on this page?

  Yes No

  When I select either Yes or no box search for album information screen clears and nothing happens.

  I tried several troubleshooting on the help forum suggestions, nothing worked so far.

  Your help would be greatly appreciated.  I have approximately 167 cd rip and file.

  Thank you

  Earl Everett

  If you use Windows 7, here's what you can try.

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• my Media Player is recording audio back. How can I uninstall and reinstall my windows 7 media player

  above described problem... I want to simply uninstall my player and then reinstall without fees

  Is that what you need? - http://maximumpcguides.com/windows-7/uninstall-windows-media-player/

  If so, simply re-check for reinstall.

  If not happened comes back with more information, what media player and as a retail lot about as possible fault.

• How to uninstall and re-install Windows Media Player 12?

  Help!

  I had a windows 7 Packard Bell Pc load pretty much since when Windows 7 is released.

  Media Player was always full of problems (mainly loading websites Web and any old logo in the directory of the image).

  Now, he won't play same videos web based and said media player is not installed correctly and must be reinstalled - sends you to the MS site but not to download.

  I pay for BT HE advise and they had no way to remove and reinstall Media player 12.

  I tried to download Media player 11 but it happens like no download for this operating system!

  As I said... help!

  Concerning

  Chris

  Hello Dollar1973,

  To develop on the post of Andrew, I would uninstall, and then reinstall Windows Media Player.

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try using the troubleshooter to see if this fixes

  the problem.

  Open the troubleshooter of settings of Windows Media Player by clicking the theStart button, and then clicking Control Panel. In the search box, typetroubleshooter, and then click Troubleshooting. Click all, and then click the Windows Media Player settings.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I am running CS4 Web Premium on Windows XP.  Can I uninstall and reinstall on my new PC with WIndows 7?  Is there a way to upgrade?

  I am running CS4 Web Premium on Windows XP.  Can I uninstall and reinstall on my new PC with WIndows 7?  Is there a way to upgrade?

  Yes, you can uninstall (but first disable all, help > deactivate) and Yes, you can reinstall on another computer.

  and Yes, you can switch to cc, CC price and membership plans | Adobe Creative Cloud

• Can I uninstall and reinstall iTunes

  When I open iTuned, I see a spinning reel. I have to force to leave iTunes to close. How can I uninstall and reinstall iTunes in El Capitan?

  iTunes is now part of the operating system and cannot be uninstalled manually.  To reinstall iTunes, OS X will need to be resettled by the recovery mode.  Reinstall OS X cannot be the appropriate to take troubleshooting measure.  It seems that iTunes becomes insensitive to the launch, try to test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

• I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  Hello

  Your MP3 player should have 2 settings - MSC that should allow the player to be used as a
  external drive and PSG that is the parameter to use to sync with WMP11. Remove the MP3
  and restart the computer. Change the MP3 in MTP mode - it power off and plug it in.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't sync my iPod to Windows Media Player. WMP does not recognize the iPod and I can't drag music files between them

  My iPod is connected to the computer and it works fine with iTunes.  But I can't get the music in Windows Media Player to iPod.  When I try to sync in Windows Media Player, it does not recognize the iPod, and I can drag files from WMP to iTunes or the iPod.

  You cannot synchronize an Apple product in itself using WMP, unless you buy a 3rd party. You must use iTunes.

  See you soon,.
  Jerry

• I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  Try with the solution provided in the link below:

  ERRO 1: Creative cloud cannot install

• can I uninstall and reinstall adobe dreamweaver CS6 without a cost?

  • can I uninstall and reinstall adobe dreamweaver CS6 without a cost?

  Depends on.

  What worm you do you have?

  If it's a worm of 30 day trial.

  If you have not with purchasing a perpetual license, YES.

  If your subscribe to creative cloud, YES.

  Nancy O.

• I can't update the creative cloud. The update started, but froze at 5%. Can I uninstall and reinstall creative cloud?

  I can't update the creative cloud. The update started, but froze at 5%. Can I uninstall and reinstall creative cloud?

  Uninstall the application using the uninstaller CC:

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Install new cloud creative app:

  https://creative.Adobe.com/products/creative-cloud

• The volume on my MP3 player is too low after extraction and synchronization with windows media player. What can I do?

  I intend to play my MP3 in my car, but the volume is too low. I tried to adjust the volume on the car radio and the MP3 player, but the volume is still too low. I tore and synchronized through windows media player with MP3 and the speed of transmission of high-quality files. Also I tried to drag and drop in windows Explorer, but once again the volume is still too low.

  I tried also exactly the same with an IPOD shuffle, but again, the volume is too low.

  Try the steps in the article provided

  http://www.ehow.com/how_7464813_increase-DVD-rip-volume.html

• I can't burn a CD with Windows Media Player.

  I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player.  My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc.  The same thing happens with itunes.  I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it.  I burned the disks before using Windows Media Player.    Help?

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• can I delete update security for windows media player 9 Series (kb969878) if I have Media player 11 update?

  Can I delete update security for windows media player 9 Series (kb969878) if I have Media player 11 update?

  Hi Query1000,

  Since you have Windows media player 11 on the system, you can uninstall the update of security for Windows media player 9. This will also help increase disk space.

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't play DVD's with Windows Media Player because no compatible DVD decoder is not installed on my computer

  Original title: Windows Media Player

  I can't read the dvd with Windows Media Player... it says

  Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  What can I do to make it work... and I don't want to pay for another program.

  Thank you.

  Can not read the DVD in the drive Media of Windows XP
  ====================================

  Running the following command may be worth a try:

  Reach... Start / run... and type or copy / paste:

  regsvr32 jscript.dll

  Press on... Come in

  You should see the following dialog box:

  DllRegisterServer in jscript.dll successful / OK

  No luck?... read more...

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.1.4235.x 86 .exe)

  Or... you can try to download and install the
  Following Codec Pack.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  Good luck...