can I uninstall customize teredo tunnel before reinstalling

Similar Questions

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

   

   

• Windows Defender turned OFF and I can't turn on. Is it because I have downloaded Windows Security Essential? If so, how can I uninstall Windows Defender, and then reinstall it.

  My Windows Defender turned OFF and I can't turn on.

  Is it because I downloaded Windows Security Essentials?

  If yes how can I uninstall Windows Defender from my computer because it does not show in the control panel

  Hello

  MSE disables by default the Defender

  and no you can not uninstall then reinstall the Defender

  It is part of the vista operating system

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• My hard drive crashed and was replaced. I can't uninstall CS6 Master Collection to reinstall.

  Hey everybody!  I am new to this forum and would like some direction. My hard drive crashed and was replaced. I was able to recover some of the old drive and the technician put my apps on the new drive but they are not operable (error 1) and require reinstallation. For CS6 uninstall programs is found on the disk (they are just aliases"). They installed the new 10.11 OS on my replacement drive.  I have my serial number and installation disks, but can not uninstall the product safely. I tried Adobe Creative tool for cleaning of clouds, but applications are still there. I also tried to reinstall on the existing master CS6 Collection, but it is hindering and freezes. Help, please! I would be so grateful! Thank you!

  Hello

  Try to delete the files listed below if you want to remove adobe CS6 apps of your machine it should help:

  1-go to: Finder > Applications > utilities > (delete these two files - creative cloud Adobe and Adobe Application Manager, as appropriate)

  2 - right click on the Finder icon, then select the "Go - To" folder.

  3. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")-~ / library (it will open the folder of the user's library.)

  ~/Library > application Support > Adobe (this trash folder)

  ~ / Library > Cache > Trash all Adobe files and folders from here

  ~ / Library > Preferences > trash all Adobe files and folders from here

  4. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command, and then click 'Return' key. / Library (it will open the library system folder.)

  / Library > application Support > Adobe (this trash folder)

  / Library > cache > Trash all Adobe files and folders from here

  / Library > Preferences > trash all Adobe files and folders from here

  5 - restart the machine and empty the trash

  6 - Download and reinstall CS6 from here: download Creative Suite 6 applications

  Let us know if that helps.

  Kind regards

  Bani

• Can I uninstall CS5 and CS6 before downloading CC?

  I have Master Creative Suite CS5 (drive) installed on my iMAC running Mountain Lion 10.8.5.  Some time ago, I subscribed to the creative cloud and installed CS6.  Problem it caused me to have to wipe the hard drive and restore from the backup drive.  My last backup was in September last year which was before I installed creative applications Cloud CC.  I would like to install the CC apps.  Uninstall the CS5 and CS6 apps first? At this point, neither CS5 or CS6 applications have been updated.

  Hi Stormy_Weather,

  It would be best to uninstall CS5 and CS6 before installing creative Cloud applications as previous versions are restored from a backup who could cause problems.

  Kind regards

  Akshay

• can I uninstall photoshop cc 2015 and reinstall clean?  How can I go about it?

  How to do a clean install of photoshop cc 2015?  in other words, uninstall it and reinstall it clean... ?  I have problems with PS cc 2015 acknowledging my printer and when she does take a few minutes for the first window to come up then more for each subsequent settings windows. I tried to print the same files in lightroom and that works fine, but I prefer photoshop.  Thanks, dj in oz

  Logout - but it's not critical. Uninstall it if your operating system. You can then use the cleanup tool to really make sure that you get everything. Then reinstall everything using the application Cloud Creative Manager.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• How can I uninstall the CD player and reinstall a previous version of the player?

  I tried the Adobe Reader DC and find the appearance of terrible application. The icons are ugly, waste 30% of the visible area of the toolbar on the right border, and I have no plans to use cloud services. I checked the pages of Adobe support for older versions of Reader. All the links that say "older versions" bring back to the DC installation page.  Where are the other versions of the player?

  Thanks for the help.

  Depending on your operating system, you can download the Reader X, XI and http://get.adobe.com/reader/enterprise/ DC

  You must uninstall the drive before attempting to install and the old version.

• Uninstalling on old computer before reinstalling the new

  I have creative cloud loaded on my laptop at home and my pc at the studio. The video card on my laptop at home has failed. Nothing but a white screen when I turn it on. I bought a new computer, but have I not uninstall Photoshop (et al.) out of my laptop until I can load on my new computer at home? If so, I do not know how to recover the license info and am not sure I want to pay for a new video card installed; Can I use the old laptop as a door (LOL) stop. Help me understand how to proceed to the loading of the Adobe on my new computer, under these circumstances, including Photoshop, Lightroom, Illustrator, and InDesign. Thank you in advance. Best regards, Kevin (Elberton, GA)

  Ideally you would disable (help > deactivate) ps on your old laptop.  but it will be quite difficult when you can see what you're doing.

  then, contact adobe support.  they can help by resetting your number of activations, http://www.adobe.com/support/chat/ivrchat.html

• Can I uninstall CS6 on my laptop and reinstall although I have already on my desktop?

  Can I uninstall CS6 my laptop and reinstall although I have already on my desktop?  The reason for this is that the version I have installed on my desk a few days old is a completely different layout to the bridge that the CS6 I installed on my laptop this summer and I don't know that I can set up the configuration of the laptop on my desk, in the uninstall and resettlement seems a simpler reconfiguration solution.

  Yes, you can uninstall and reinstall, but make sure that you disable the software first by going to the menu "help" and select 'disable' before you uninstall if it would increase the number of activations of license.

  According to the EULA (End User License Agreement), you can not exceed 2 activations for the retail software. Thus, you should always disable the software before you reinstall it.

• I upgraded lightroom 4 to 6 Lightroom and find collections does not because miss me the collections in lightroom 6 but in lightroom 4. I have installed the latest updates for lightroom 6 where the question is: "can I uninstall then reinstalling lig"

  I upgraded lightroom 4 to lightroom 6 and find collections does not because it lacks collections in lightroom 6 present but in lightroom 4 which is where I created them. I also have a missing bit of the last folders created, but scattered pictures but when I select all records for all the photos. I have installed the latest updates for lightroom 6 where is my question: ' can I uninstall Lightroom 6 followed by reinstall lightroom 6 to retrieve collections and put the pictures in the correct folders as they are in Lightroom 4? Given that I have updated online on my desktop windows 7, how to find my license if necessary? Thanks for your reply.

  See if this link helps:

  https://helpx.Adobe.com/Lightroom/KB/catalog-FAQ-Lightroom.html

• How to install Teredo Tunneling Pseudo-Interface

  Dummy me... In Device Manager, I uninstalled the Teredo Tunneling pseudo-interface. I need to know how to reinstall this interface. I've seen the other reviews on the web on how to set it up, but all those who assume that the interface is still visible in Device Manager.

  So where can I find the procedure to install this?

  I'm on Windows 7 Professional x 64.

  Thank you

  You have enabled the option - Show hidden devices ?

  Device Manager > view > CHECK show hidden devices.

  Expand the network adapters

  Microsoft Teredo Tunneling adapter is it listed?

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• The adapter Microsoft Teredo tunneling / need to reinstall. How can I do?

  How can I reinstall Teredo Tunneking adapter?

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices. If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

• Microsoft Teredo Tunneling adapter, can not start correctly

  When I run my health system monthly report the resource and performance monitor told me that;

  A device has a configuration problem that prevents it from starting correctly.

  Details:

  The device, Microsoft Teredo Tunneling adapter, cannot start properly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for the device is 9. ****************************************** In Device Manager the driver shows up to date, but said the properties; This device cannot start. (Code 10) Since the report the resource and performance monitor says it's a plug-and-play I uninstalled it but there is nothing when you restart and I had to find and reinstall.  Of course everything that fact was put me where I started. How can I solve this problem?

  Hello

  Thanks for posting your query in Microsoft Community.
   
  I understand that you have problems with the installation of the Microsoft Teredo Tunneling adapter device drivers.
   
  Method 1: First of all, try to follow the steps mentioned in the link below to fix the problem.
   
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104/en-us
   
  Warning for the registry:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
   
  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7
  
   
  I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
   
  Thank you

• Cannot go online, because Norton is uninstalled. It seems that something is wrong with Teredo Tunneling Pseudo Interface - got error code 31.

  I uninstalled Norton, and since then I can't go to Internet. There is an error code 31 for Teredo Tunneling and I can't reinstall / restart the driver. You have the problem with the default gateway after diagnosed. Please help.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download the Norton removal tool to remove the remains of it.
  It often leads to such problems.

  The computer you are using now if you have an Internet connection with the other > download / save the tool > copy to Flash Drive > transfer / install on another computer/laptop computer > run it.

  See you soon.

  Mick Murphy - Microsoft partner

• Teredo Tunneling pseudo-interface must reinstall in WIndows 7

  I need to reinstall Teredo Tunneling pseudo-interface so that I can use the homegroup in Windows 7, because it requires IPv6. IPv6 is avoided in network adators etc.

  How can I reinstall Teredo Tunneling pseudo-interface to only show in network adapators in Device Manager, please?

  I have my Dell Windows 7 upgrade DVD but do not know how to retrieve this file.

  Possibly a Dell-techno read it may be able to help?

  mombodog

  Do a system restore, choose a date before things are flawed.

  All programs > Accessories > system tools > system restore.

  Thanks for the suggestion

  I've since found a solution to the problem, can be useful if others suffer from the same problems:

  http://www.cableforum.co.UK/Board/34932105-post6.html