Can I upgrade to iOS 10 using a Mac with OS (10.8.5) Mountain Lion?

Similar Questions

• You can use my Mac with iOS

  You can use my Mac with iOS

  Hello ifixer2,

  Thank you for using communities of Apple Support.

  No, you need two or more Mac computers that meet the following requirements to use Back to My Mac:

  What you'll need

  To configure and use Back to My Mac, you need these things:

  • Two or more Mac computers that use the same account iCloud on OS X Lion v10.7.5 or later version.
  • A Terminal supported access AirPort (AirPort Extreme, AirPort Express or AirPort Time Capsule) or other Internet router that supports UPnP or NAT - PMP protocol, with the latest firmware available. AirPort base stations require version of firmware 7.6.1 or later for Back to My Mac.
  • Utility airPort 6.3 or later.
  • For screen sharing, a 300 Kbits/s-or-more rapid, bidirectional (high-low) Internet connection between computers. You may be able to use with slower connections to share files. If file sharing doesn't work as you think, check your settings and connections.
  • A firewall that allows remote connections. Some firewalls may prevent some back to my Mac connections. For example, when you're at home, don't maybe not able to connect you to your Mac at work. But when you're at work, you might be able to connect to your Mac at home. If you are not sure if the firewall will allow the back to my Mac connections, check with the network administrator for your organization.

  If you want to use an AirPort Extreme or airport Time Capsule to access files on a hard drive external, you need a Mac OS extended (journaled) formatted USB hard drive. When you use with Back to My Mac, your hard drive is displayed as the base under shared in the sidebar station Finder.

  Set up and use Back to My Mac

  Take care.

• Can I build an iOs app using the muse of adobe and phone gap?

  Anyone know if its possible to make an ios app using adobe muse with phone gap?

  There are bugs? or an example of an application made with muse?

  Hello

  Similar discussions:

  http://forums.Adobe.com/thread/1415885

  http://forums.Adobe.com/message/5712059

  Thank you

  Sanjit

• Can what version of lightroom I use on mac OS 10.11 which is not connected to the internet?

  Can what version of lightroom I use on mac OS 10.11 which is not connected to the internet?  I have lightroom 3, but upgrades to Mac OS 10.11 and now the library behaves strangely with question marks on the folder icons.

  The only version currently on sale is version 6.  It is available in creative cloud and non - Creative Cloud.  The Cloud Creative version requires no continuous internet Connection, but is required periodically to check the status of the subscription.  The non_Cloud version requires no internet

• I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message "could not complete your request because the file appears to be a model of camera that is n

  I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message that "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "Yet the Nikon D800 is on the list of supported devices.  Can anyone help?

  And temporarily disable the Gatekeeper by allowing downloads from anywhere, or your installer will be marked as 'damaged' because that CS5 is out before Gatekeeper and is not "signed" that is not approved.

  

• When I tried the update of lightroom cc2015 I get a U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be gra

  When I tried the lightroom cc2015 update I get an update of the failure U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be greatly appreciated.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• How to install "Age Of Mythology" on windows 7 using a MAC with Parallels software.

  I have a version of the game "Age Of Mythology" originally for XP. I'm owner is no longer a PC but I use a MAC with Parallels 7 to run Windows 7.

  I put the drive on the windows desktop, but I don't know how to install this game and do run. Someone please help!

  How to install Age of Mythology | eHow.com

  also:

  INSTALL AGE OF MYTHOLOGY - YouTube

• Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  HI Timp,

  Sorry, but that kind of image manipulation is not for the purpose of Lightroom and more oriented toward Photoshop and retouching of composition of similar images.

  Please check the links to know the image overlay in Photoshop below:

  Mix photos with apply Image in Photoshop

  http://www.photoshopessentials.com/photo-effects/blend-photos/

  The superimposition of Images in Adobe Photoshop | DIY digital composition

  For more good result to check the google search.

  Google search: Google

  Concerning

  Sarika

• How can I upgrade images IOS system of routers, switches and firewalls

  Hello

  I am very surprised and fewer still understand how the program license or the Cisco's IOS upgrades are done. I have several routers, switches & ASA who I wan upgrading of IOS, but I can't do it. How ever I can download these images on the internet, but I want to know how can I do this Cisco as I don't trust these IOS is available on the internet.

  According to my study I found that I need to have the number of Cisco Service contract for the devices so that I can download updated the IOS Images for them.

  Someone kindly explain what are the best methods for requirements above.

  Concerning

  @Mohammed

  You are right about a contract of service. Cisco calls this Smartnet support. It includes both supported hardware (i.e. returns for defective equipment), software support (including the right to download and upgrade your software) and technical assistance (through the Cisco TAC). SMARTnet is charged separately for each device covered. Once you have it, your cisco.com username must be associated with your service contract number. This will allow then allows you to download the software of cisco.com. (There are a few cases where you don't have to have a support contract - especially when there is a safety notice (PSIRT) indicating that the Cisco software was flawed it was released at the beginning.)

  Each product (or product family) has a product on cisco.com support page. This page includes release notes, Setup guide, user guides and links to downloads of software for this product. Start by reading the release notes and determine which (if any) update is appropriate for your product. Then, you can download and upgrade the software if necessary.

• Can I upgrade my membership for use with 4 computers at the same time?

  I have an Adobe membership and I use it very well on my computer

  Now, more people are joining in and I think to upgrade my membership to use it on 4 computers at the same time.

  Kindly advice if this is possible and how to do it.

  Kind regards

  Issam

  Hi Issam

  Each user must have their numbers, so they each need to register using a unique ID for Adobe.

  We also have team members that provides additional storage central license management - https://creative.adobe.com/plans

  Kind regards

  Bev

• Where can I download silverlight for windows using a mac?

  I really want MS to treat people like they're idiots.   :-(  One of the reasons why I have avoid them more.

  And I avoid using a software which provides support through forums, forums are a waste my time!  Options would be nice.

  I have a Mac, I know.  I have a Windows computer up-to-date with Silverlight, I know.

  As much as I can get on their Web site, I can't find a way to download the latest version of Silverlight for Windows using computers.

  Where can I download the latest version of Silverlight windows, preferably using a Mac because it is my main computer.  I rarely use Windows personally more.

  Hi, Marilyn.

  Thanks for the suggestion, but not necessary.  I had the problem solved, as I've mentioned in my previous post.

  Also noted there, I do not use MS Forums except as a last resort.  And sometimes I just give up instead of using the forums.

  Why?

  1. MS Server response time is slow cussedly too often.
  2. I have to look for answers, rather than simply through a condensed list, as you can with a newsgroup reader.

     The problem with research is, if I use the word 'bucket' and posters use the word 'bucket', in the subject line, I'll never find it.  But if I can easily scroll the list quickly, and I see the word 'bucket', I can't stop and open this message.

  3. The same messages show 2-3 times in the threaded view.
  4. Forums of waste server and user of the resources and bandwidth transmission system.  You always download the same Visual information such as graphics and ads over and over and over ad nauseam.
  5. Forums are for people who do not know how to use focus groups and companies like MS used to provide good documentation with their products.
  6. Connection time can take forever.

  All the above comments, to some extent, apply to all the forums that I have all been forced to use.

• I can't fix my mouse to use the option with a single click in windows 8. The two click works fine, but I prefer the one click option

  With Windows Vista and Windows 7, I put the mouse to use the option with a single click to open files and programs desktop.  I can't find this option in Windows 8.

  Hello
   
  Thanks for the post about Microsoft Community.
   
  I understand that you don't want to use the simple click instead of double click of the mouse that you used in Windows Vista and 7.
   
  I would ask you to please follow the steps below to activate the option just click on the button of the mouse in Windows 8.
   
  un) Please move the cursor to the bottom right and click on the search box, which is the first option in this Panel.
   
  b) in the search box, type Control Panel, and then click Control Panel.
   
  c) after opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. Click "appearance and personalization".
   
  d) now click on the folder option to open it.
   
  e) now you will see many options in the folder option. Now, click single-click to open an item (point to select).
   
  f) now click on apply and ok to turn this feature on your computer.
   
  I hope your problem is solved now. Please feel free to write back if the problem still persists.

• I can't log out Adobe CC. I use a MAC with a business account? Help

  I am able to connect to Adobe CC and to update, but I can't log out Adobe CC. I use a MAC

  Connect and disconnect activate Cloud Creative applications

• How can I clear the cache using a Mac with the 3.6.3 version?

  I use a Mac OS x (10.6.2). I need to clear the cache in the version of Firefox 3.6.3. Help, please. Thank you.

  This has happened

  Don't know how many times

  Is today

  Try to clear your cache:

  1. in the menu bar, click Firefox | Preferences

  2. click on Advanced Panel

  3. in the Network tab , click clear now

• How can I install my Windows 7 on a mac with all my files intact?

  I'm getting a Macbook Pro and I would like to install it on Windows 7 via Bootcamp. I have a few questions:

  
  
  1.) without having to buy a new Windows 7, can I use my current and transfer it on my Mac, with all my files with it?
  
  
  2.) If Yes, how can I make a copy of my Windows 7? What do I have to type in my license of something? Or open a file?
  
  

  
  

  I'm getting a Macbook Pro and I would like to install it on Windows 7 via Bootcamp. I have a few questions:

  
  

  1.) without having to buy a new Windows 7, can I use my current and transfer it on my Mac, with all my files with it?

  1 license, 1 computer. If your current copy of Windows 7 is installed on another computer, you cannot transfer it to your Mac unless that remove you it from the current computer. There are also a full commercial license.

  
  

  2.) If Yes, how can I make a copy of my Windows 7? What do I have to type in my license of something? Or open a file?

  Learn how to:

  
  

  See:

  http://www.Macworld.com/article/1165272/Bootcamp.html

  also:

  
  

  http://arstechnica.com/information-technology/2012/11/no-support-no-problem-installing-Windows-8-on-a-Mac-with-boot-camp/

  The above mentions Windows 8, but the same principles apply to Windows 7, especially with the new MacBook Pro, who do not have optical drives.