Can I use 2 routers on my home network?

Similar Questions

• can I used pc deskjet as pc home network

  can I used pc deskjet as pc home network

  In the future, if it please read this post and then provide details.  What printer model? What operating systems? Have you implemented an existing network?

  In what follows I'll assume that you have the Deskjet 1000 j110a and you currently have a home network set in place.  I'll assume that the computer is connected to an XP machine and you have configured and enabled for sharing. (Search for 'Printer Sharing', in respect of assistance on XP to see how to proceed if it is not installed).  Suppose to not the XP machine has a network name of ComputerName and the printer is shared as printername.  In the following discussion, change the names to match your computer and printer share names.

  Now, on the other machine to install printer drivers, as if the printer is connected directly.  When it gets to the part asking you to connect the printer say you'll do it later.  (For the following that I will assume, the second computer is Windows 7.) On the Windows 7 computer, go devices and printers folder, add a printer, the local printer, creating a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update and then select Hewlett-Packard for the manufacturer then the Deskjet 1000 j110a for the printer.

• Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?

  Original title: the reconstruction of my PC - Windows 7 issue.

  I will be rebuilding my PC which has Windows 7 Home 64 bit installed.  I did the upgrade from Vista to Windows 7 with a family 3-pack.  Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?  Seems a little ridiculous that I have to install another OS and do the upgrade.  I searched the forums and could not easily find an answer to this question.  Help, please.  Thank you!

  Also note that as you change not the motherboard Windows should not require re-installation and activation.

  J W Stuart: http://www.pagestart.com

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• How is it, I can't see my iphone on my home network

  I am new to iphone, and I wonder why I can not see my iphone on my home network as I have my droid?

  See how?  In what context?

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx

• How can I remove the computers in a home network, I created?

  Original title: leave the Working Group

  How can I remove the computers in a home network, I created? How can I remove a home network? I know it's easy with windows 7, but I can't understand for the life of me how do it with XP.

  Hello

  Let me see if I can sort this out.

  You have a network named "Homegroup".

  You have several working groups set in place, and you want to remove a computer from one of them?

  If Yes, go to this computer, log in as administrator

  Click Start > right click on my computer > select Properties

  Click the button change

  Delete the name of your workgroup of the lower part of the window and in its place type 'WORKING group' which is the default setting.

  I hope this helps!

• can I use a disk of vista Home premium with a vista business key?

  I just got a laptop that has been deleted.  the key below is for windows vista Enterprise edition.  Can I install a version of vista Home premium and use this key?

  Hi Angela,

  Thanks for posting the question in the Microsoft Community forums.

  Unfortunately, you can not use the Vista Business Edition key to activate the version of Vista Home Premium.

  For more details, you can contact the store Windows.

  See the Windows store Contact link.

  How and when to contact Microsoft customer support Service.

  http://support.Microsoft.com/kb/295539

  For any help about Windows, you can always post on the Microsoft Community Forums, we will be happy to help you.

  Thank you.

• CAN´t find other computers on the home network Windows.

  I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"?  Thanks in advance.  / Thomas

  Hello
   
  To home network computers running different versions of Windows, we need to make sure that what follows.
  a. ensure that all computers are in the same workgroup.
  (b) the value of the private network location type.
  c. open ports in your firewall to allow file and printer sharing.
  d. turn on additional file and printer sharing options.
  e. consider using password protected sharing.
  5 using the network card.
   
  The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
   
  To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
   
  For more information on the "networking running different versions of Windows' computers, visit the following link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• How can I change pc host on a home network?

  Removed from the network for repairs, now want to use another pc as the internet connection.  How do I change the IP address and I have to do?  I have Comcast cable THAT DSL connected to a router then to a pc.  I have 2 other PC using wireless to connect to a printer.  These links still work.  I want to have a wired connection to the router to my host pc.

  Hello

  If you use a router with home network (peer-to-peer) all computers are equal on the LAN (no host server or real).

  There is no host computer are the same not configured with a different IP address, which is usually provided by the router
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Can I use 63-bit Win 7 Home base with the same product key that I used for 32 - bit?

  1 I have win7 64 bit with licesence version hombasic. And now I use homebasic 32bits and 64bits format and install with the same key... So I jst want to know that this process can damage my computer laptop operating system? or there is no problem whatever I did!.

  Original title: Win7

  Well, it will damage her, just that you will not run the 64-bit version, which means, if you have more than 4 GB of RAM installed, Windows 7 Home Basic 32 bit will not support it.

  You should also check that the manufacturer of your computer is using 32-bit drivers for your computer.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• Can I use multiple partitions on a disk network with AirPort Extreme?

  I want to be able to add a hard drive 2 TB to my AirPort Express 802.11ac and have the drive partitioned as well as 1 TB is for a Time Machine backup and the other 1 TB then for file storage?

  While I understand the need to use an external engine hard drive and format the drive while it is directly plugged into the Mac, formatting of os x journaled (Extended) etc. I just want to know if more partitions are able to be used in this way at a time.

  Amy help would be highly appreciated.

  Yes, you can partition an external hard drive.

  You have used Express instead of the extreme...

  HDD 2 TB to my AirPort Express 802.11ac

  Clearly a foul strike but just so you know... Express do not support the USB hard drives.

  Buy the right USB is crucial to the success of this... not all the work... some not at all, some not reliable.

  I ran Touro successfully... others are using LaCie...

  Compatibility of USB drive with routers from the airport. Contribute to the database.

  Just be careful...

• Have 2 pc windows 7 (desktop and laptop computer) and I want to use the password on the home network.

  I recently had to replace the hard drive in my desktop PC. After you have reinstalled, I set up the network to connect to my laptop. I created a password of the UAC on both computers.

  I activated ptected password sharing on two PCs.

  Now when I try to access the network on a pc, a dialog box asks me to enter the network password.  I walked into the UAC password erro and to get that connection is not valid.

  If I disable password sharing each PC is visible to another on the network.

  I prefer to use password protected sharing just as extra protection.

  I must have a parameter simple activation/deactivation.  Can anyone help.

  Hello

  You have a homegroup Setup?

  If you have a configuration of homegroup, I suggest that leave you the homegroup and set it up again.

  Create a homegroup

  http://Windows.Microsoft.com/is-is/Windows7/create-a-HomeGroup

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  I suggest you to change a homegroup password and check if it works:

  a. open homegroup by clicking the Start button, click Control Panel.
  b. type homegroup into the search box, and then clickhomegroup.
  c. clickchange the passwordand click change password.
  d. type the new password you want to use (or accept it suggested), click Nextand then click Finish.

  After you change the password, all connected to your homegroup will ask you to enter the new password.

  For more information, please go to:
  http://Windows.Microsoft.com/en-us/Windows7/change-a-HomeGroup-password

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way#section_1

• Can I use Config Free for enterprise wireless network?

  I am an administrator Configuration computer portable personal staff to use on our sales network. I can choose between creating a user account so that the employee would have separate sign, and then turn it back on in order to get on the corporate network, or I can choose to use ConfigFree - who comes on his computer.

  She must be able to access files and printers on the server of the company.

  ConfigFree will allow my employee, hop on the network wireless company and the 'login', access to printers and files of the company? Is there a good resource to describe how to configure?

  Thank you, Amanda

  Hello Amanda

  In my opinion you must learn about ConfigFree and what can be done with this tool.
  I think there is no sense to write about it here and you can read all about it in the help file.
  Just start ConfigFree and click Help.

  Read a bit of ConfigFree and all options particularly useful functions there ConfigFree.

  If you have any other questions let us know.

• Internet problems: can't use it in safe mode with networking

  original title: Internet problems

  My computer connect to internet wireless whenever I turn on my laptop; However, I still can't access internet. I have to go to safe mode with networking to get internet. What can I do? My Xbox is connected to the internet with no problems at all.

  Hi Aaron,

  What antivirus do you use? Since you are able to connect mode without failure, it leads me to believe that this is caused by a program that you run which restricts navigation. Try to disable all antivirus software and try to get online.

  Just note that it's always a good idea to always have an antivirus running. But not more than one at a time can cause problems.

  I hope this helps.