Can I use a Gen 4 and Gen 3 ATV on the same network?
Can I use a Gen 4 and Gen 3 ATV on the same network?
Tags: Apple TV
Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices). We were able to connect between laptops and printer without problem (printing, scanning, etc.). A blow, or laptop computer can "see" the printer. I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network. I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named. Help
On the printer's wireless radio was 'on' but I clicked OK anyway. Disconnected and reconnected to the network and noted the address IP of the printer had changed. Laptops are now able to see the printer. Problem is solved.
I have here is the configuration currently as below in the image. To describe the same internet cable is connected to a Cisco switch, which is connected to the PC in LAN (wired). A switch output is connected to the entrance of the wireless router Netgear Nighthawk AC 1900 Smart model of WiFi router # R6900. Wireless devices (laptop) are connected by the router.
Each device has internet access. However, I am unable to run software LAN or unable to share any file of devices connected to the switch to the connected wireless devices. I can't ping any device the device wireless wired.
Can anyone suggest what are the settings that I should do or what are the steps I should follow that will make wireless and wired devices in the same network.
PS Plus early I tried the internet connection to the wireless router and then out of the router to pass, which has solved this problem. But slowing down my internet speed in wired devices. So, is it possible to have all devices in the network even with the current configuration?
Thanks in advance.
I made wi - fi router reset hardware and configured in Access Point mode, that solved my problem.
On my firefox toolbars disappeared. I can't do anything with it and must use Internet explore for now.
I unintstalled and reinstalled but it does not work. I have a screenshot, how to post?
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).
If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.
Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.
- Firefox menu button > Options
- View > toolbars (press F10 to display the menu bar)
- right click on empty toolbar space
Use the toolbar (Customize) to open the Customize and set the toolbar to display items.
- If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
- If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
I would like to be able to sync settings between three computers on my home network without having to go on the internet and put everything on a remote server. Computers can already communicate with each other and share, then there should be an easy way to ensure that Firefox data sync would be also.
Please see this.
Another way would be to do it manually by using another application, for example. SyncToy, creating the correct pairings between the data on the PC.
Firefox stores your personal data in a place known as the Firefox profile folder separate from its installation folder/files. The extensions folder Addons, although some addons may store additional data in the profile of top-level folder, extensions.ini and extensions.sqlite has the info of addons, places.sqlite holds the bookmarks and history, the prefs.js has Preferences, signons3.txt + signons.sqlite files are needed for the passwords and finally sessionstore.js for tabs.
I would like to be able to access Outlook from my laptop when messages are received on my pc main workstation, advice on how to achieve this? Thanks for any help.
There are several ways to achieve this. One way is to use a tool of office connectiopn RDC, VNC, GoToMyPC or Teamviewer. With tools like these you really not use mail on both computers, but using a PC to access another PC where Outlook.
Another is to install Outlook on the second PC and configure an account that will access the same mailbox as the access one the first PC. You share contacts and calendar, but you can receive and send messages on computers or both, with the same e-mail address and it is not too difficult to get contacts and calendar from one PC to the other.
A third is to place your Outlook data file in a folder that you share on your local network and access to this data from a PC file. If it is not a recommended approach, it works, provided you don't try to access the data of these two pieces at the same time, and you'll have all your mail, contacts, calendar, tasks, etc. available on both computers. You will need to make sure that you back up your data frequently as well, just in case, Outlook because Outlook is not designed to work in this configuration.
You can also buy third-party tools that will enable this type of share, you want. Here's the safest which provided the data from the file on the network, but they are not free.
In the future, please ask Outlook questions in the forum for your version of Outlook Outlook.
Can I have my mail sent to both Outlook Express on my PC and Windows Mail on my laptop?
How to import mail from my XP computer on the Vista laptop?
None of this is related to the Windows 7 forum. However:
A: If both computers use the same e-mail address, on both machines:
Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.
On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.
B: import messages into Windows Mail from Outlook Express
Bruce Hagen MS - MVP [Mail]
I would like to you use PS on two different computers at different times: I may have?
Yes, your license allows you to have two machines with active installations. As long as you do not use the license on both machines at the same time you comply with the terms of this license.
I use the model of 'Continuous measurement and logging' project comes with LV 2013.
It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)
I ran into a snag though.
I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.
I have trouble getting the data from the two sources to display on one graph.
I've isolated the problem in the attached vi.
Here's what happens:
1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.
2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.
Can anyone suggest how can I fix?
Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.
The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.
Can I have the Audition 3.0 and 5.5 hearing and use both?
I ask this question because I see concerns about certain features in 3.0 and upgrade to 5.5 on the forum.
I have no clear information on the subject, so can I have both installed?
Yes you can. If you are installing the first 3.0 & then CS5.5.
I have the problem with connecting new gen 3 ATV to my wifi network. This device must be used for the TV on the floor. I have a GEN 3 oldest device installed in TV downstairs. I followed the instructions but does not connect.
I just bought new gen 3 ATV. Must be installed in the TV upstairs. Unable to connect to the Wifi network. I followed the instructions for the installation, the network is OK for other devices. Have more older gen 3 ATV TV downstairs in the operation. Is there a problem to have 2 ATV on the same network, or am I missing something?
I am pleased to have the Apple TV on my TV as well and have a up and down. Both work well, is not a problem having both on the same network.
After going through the normal installation process, I would recommend then walk through this article.
Note that you will want to test after each step.
Let us know how it goes.
I have Windows 7 Enterprise (32 bit) installed with Office 2007. New machine. However, I am a trainer/support specialist and many of my clients have XP Microsoft Office 2002/2003, and I need to provide support. It would be much easier if I had XP and Office 2002/2003, but I know that Microsoft does not recommend the 2 versions on 1 PC. Windows Virtual PC is the solution?
Yes, that might work. You can install Windows Virtual PC and Windows XP Mode, and then install Office 2002/2003 in the Virtual PC in Windows XP. You can then run the Office 2002/2003 programs in Virtual PC, or close the Virtual PC and run them in Windows 7 from all programs > Windows Virtual PC > Windows XP Mode Applications . You can even have Office 2007 programs and 2002/2003 open at the same time in Windows 7. Boulder computer Maven
Most Microsoft Valuable Professional
We have a great system that is developed in VB and uses the traditional inherited NOR-DAQ system. The system controls the controller PCI-DIO-96. We would like to upgrade to some parts of the system to NOR-DAQmx and use VB.Net and we know that you can install both systems together on the same computer.
We have a few questions:
(1) once the legacy of NOR-traditional DAQ OR DAQmx software can be integrated in the same system. Some parts of the system will always use the VB and the other parties will use VB.Net.
(2) if the answer to the first question is Yes. Are there hardware or software limitations? Is there a recommended way to integration?
(3) are there articles based on the knowledge about it?
There are a number of limitations to the use of NOR-DAQmx and NOR-DAQ traditional at the same time. First of all, only one of the drivers can access the device at a time. To switch between the drivers, I recommend that you read this knowledge base Article: that I can use OR-DAQ traditional (old) and NOR-DAQmx simultaneously? You will need to use the equivalent functions of VB .NET to switch between the pilots.
In addition, the system should use Windows XP or an earlier version.
I recently updated my computer to Windows 7 Pro. I also have a laptop running Vista Pro. I have configured remote desktop on my Windows 7 machine to allow my laptop to access and it works fine when I work the two machines on the same Linksys WRT54 router, here at my small business. I have configured my router to allow communications to port 3389, but as soon as I take my computer laptop home, I can't access my desktop computer. I have to configure my home router as well? It's a new Motorola ADSL router/modem and no place in the configuration to allow port forwarding or port address. Help!
We are unable to access a computer from another computer if they are in another network by using remote desktop.
If they are in the same network, use the following links as reference:
Hope that helps.
In other words, you can have multiple pages sizes in your ePub?
If so, can you please make the steps or point me in the direction of a tutorial please?
You can have good scrolling pages and pages standard as long as they reside in different piles
You can't have a smooth scrolling and a standard page in the same .indd file
Maybe you are looking for
Hello! I was wondering if it is possible to assign a controller that could cut a channel strip and at the same time to reactivate another in the same patch? Thank you
I had to remove Windows Vista from my laptop that I forgot my password.I tried to re - install windows from the disk I got with my laptop, but I have problems because it won't pass through two phase II. Could someone tell me the problem or tell me ho
Hello. I had a problem of airplay slow play movies, DVD or any video support 720 p or higher on my old one year Apple AirPlay and new Panasonic TV. I've been through problem solving, including restore and optimize my Telus router (which has 2.5 Mbps
I see there is what we call a 'break' but I can't find it in LV
Is it possible to print a playlist of media player12? We want people to know this song is played when during the marriage. I really don't want to type everything out! original title: print a media player 12 playlist