Can I use a NAS as a remote data store

Similar Questions

• How can I change the batteries in the remote control Stor.E TV?

  How can I change the batteries in the remote control Stor.E TV?

  Thank you very much
  See all ;)

  Everything must be described in the manuals.
  In any case I'm happy you found out how this should be done only. ;)

• How to download the VM of remote data store after the backup of veaam task?

  Hi all.

  I created the backup job with veaam in the remote data store and now I want to download the VM fmrom backup store, but I can't find the jobs saved only 4 files veaam VMX file: VMDK, NVRAM, VMXF, VMSD but not VMX... How can I download the virtual machine with these files?

  Yes, in the wizard, select use the existing drive...

• local group can be used for authentication to the remote user?

  Hello

  Can I use local user databease created the PIX as authentication method for remote access VPN clients. When tried to make using PDM following error has been shown

  "Local group is not taken care of for the user remote auth.of a client remote easy vpn." Please select another group of servers auth... »

  Snapshot of PIX is attached.

  This cliché is: suite menu.

  ---> VPN configuration---> remote access--> vpn cisco client---> select the Group---> edit--> Advanced-->

  Is there is another way, what can I use the local PIX basic data itself to authenticate users from the outside world of the VPN client.

  no doubt this pix is able to authenticate the user remote vpn against its local database.

  Here are the code examples:

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0

  access-list 120 allow ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0

  (Inside) NAT 0-list of access 101

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  ISAKMP identity address

  ISAKMP nat-traversal 20

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnset

  IP local pool ippool 10.1.1.11 - 10.1.1.21

  vpngroup address ippool vpnclient-pool

  vpngroup idle 1800 vpnclient-time

  vpngroup vpnclient-Server dns 139.130.4.4

  vpngroup vpnclient password cisco456

  vpngroup split tunnel 120 vpnclient

  Crypto-map dynamic dynmap 10 transform-set vpnset

  map remote_vpn 20-isakmp ipsec crypto dynamic dynmap

  Cisco username password cisco123

  AAA-server local LOCAL Protocol

  client authentication card crypto remote_vpn LOCAL

  client configuration address card crypto remote_vpn throw

  client configuration address card crypto remote_vpn answer

• How can I use FNDLOAD for XML reports and data defnitions

  I program simultaneous registerd bound reports xml and data defnitions in instance of staging and managed to switch to DEV... After updating of this stage and when I download the details of DEV and transferred to the program only simultaneous scene I can download... Can we use the command FNDLOAD for definitions of data or the data model for the XML report, FNDLOAD used for the simultaneous program, he transferred only the details of the program at the same time.

  Hello

  Use XDOLoader.

  Note: 469585.1 - how to use XDOLoader?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=469585.1

  Kind regards
  Hussein

• Can't see the logical volume when creating data store - vSphere 4.1

  Hi guys, got another problem with ESXi 4.1 on a HP Proliant ML350 G6.

  ESXi 4.1 update 1 has been installed successfully on the server on an internal USB. Our next step is to create a store of data through the vSphere client.

  The server has five 500 GB SAS configured in a RAID 5 array drives. The server has a HP Smart Array P410i RAID controller. I see five physical disks and logical volume of about 2.3 TB in RAID Utility. However, when access us the hypervisor via the vSphere client and try to create a data via a storage LUN/local store, the display shows then no logical volumes or the drive bays on which to create a data store.

  We are usnure why this is, as the ESXi 4.1 installation program could see this logical volume when I was installing the hypervisor, but he does not appear in vSphere for use in a data store.

  If anyone can help?

  Thank you very much.

  Each disk must be less than 2 TB - 512b

• How can I move virtual machines from a local data store for a new iSCSI SAN?

  Hello guys,.

  Now that we have a new iSCSI SAN market how can I tranfer all the virtual machine to a local data store for a new SAN? Can I stop the VM in the host, and then copy the DataStore files with all the info on the new volume?

  Thank you

  Pesinet

  Alternatively, you can use VMware converter or cold Migration / Storage VMotion if you have the appropriate licenses.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

• An external HD w / 6th gen Airport Extreme can be used for NAS?

  I ' d like converted my Mac home theater use more, and I thought about options for NAS.» My current kit includes an old 802.11 g Express, so of course I will upgrade to a new extreme for bandwidth extra. I see the extreme has a full range of ports at the back, so can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  Yes, if you are willing to accept extremely slow performance compared to a normal NAS.  The reason is that the USB port on the AirPort Extreme is only USB 2.0, and due to the limitations of speed processor on AirPort Extreme, the port is working at only half the speed of a USB 2.0 on a computer.

  So, at best, the 'budget' NAS can run about one third to half the speed of NAS normal. This might be OK for backups and other data that you may not access on a normal basis, but it would not be recommended to try to locate a picture of 'work' library, video library or other type of audio/video media on the USB key which will be available on a regular basis.

  Another issue to consider is that the USB 2.0 on the AirPort Extreme is in power, then you will probably need to use a USB powered with AirPort Extreme hub.

  Finally, most of the USB hard drives are now USB 3.0... and the port on the AirPort Extreme is only USB 2.0.  In theory, USB 3.0 is backward compatible with USB 2.0... but the theory does not always true in practice.

  If you already have a USB 3.0 drive, Apple does allow a privilege to return 14 days for the purchase of new AirPort Extreme, so if you still wish to proceed, you can try things for a week or two to see how well... or, even if... .they will work.

• Server Windows 2008 R2 - can you use for a single user remote desktop after the initial 120-day grace period?

  I installed Windows Server 2008 R2.  During the 1st 120 days, remote desktop worked for multiple users.  Now that the 120 days are up, it is necessary to purchase client access licenses.  However, is it possible to activate the remote desktop for one user without having to purchase client access licenses?  If so, I would like to ask for details.  I've been everywhere in the server options and can't seem to find the right combination.  Thank you!

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps.

• How can I use GDAL to read pyramid georaster data?

  I use this dataset = Gdal.openshared("geor:username/password@dbname,rdt,rid",Access.GA_ReadOnly method) to read raster data of georaster, but simply read data from the source. If I want to read the data of the pyramid of georaster, how could I do?
  
  Kind regards
  
  Lin

  Lin, as Ivan explained in another thread, the cumulation is made by calling sdo_geor.generatePyramid, so the same block sizes apply on the pyramids. in your case, it would be 512 x 512.

  When questioning a georaster object or its pyramids, gdal would still only blocks that overlap with your query window, the so-called selective recovery recover.

  concerning

  Jeffrey

• How to create the snapshot to the remote data store?

  Hi all.

  I have esxi 4.1 now if I run the snapshot in the snapshot file created on the host server, but I want to create the file snapshot directly to remote NAS. Can I do this?

  Thanks in advance.

  best account.

  Dan.

  check this, you can set a different location of snapshot: http://blog.vmpros.nl/2009/05/14/vmware-creating-snapshots-in-a-different-location-than-default-virtual-machine-directory-1002929/

• How to find if a scsi disk can be used as a ROW or only use not vsphere CLI.

  Hi, I want to know if the SCSI disk can be used as RDM and a remote computer running vSphere CLI.

  I tried to use 'vicfg-scsidevs - l', but it doesn't have the required information list

  ===============================================

  Here is sample out put

  MPX.vmhba0:C0:T1:l0

  Device type: disk

  Size: MB 69459

  Full name: disk space from VMware (mpx.vmhba0:C0:T1:L0)

  Plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Seller: VMware model: Block device Revis: 1.0

  SCSI level: 2 is nickname: status:

  : RDM Capable is removable:

  Other names:

  VML.0000000000766d686261303a313a30

  empty fields "Is Capable RDM" here.

  =======================================================

  When I executed the command 'esxcfg-scsidevs - l' on an ESX Server, he gave me the necessary info.

  MPX.vmhba0:C0:t0:l0

  Device type: Direct access

  Size: 138919 MB

  Full name: disk space from VMware (mpx.vmhba0:C0:T0:L0)

  Plugin: NMP

  The console device: / dev/cciss/c0d0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T0:L0

  Seller: VMware model: Block device Revis: 1.0

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: false

  Is Local: true

  Other names:

  VML.0000000000766d686261303a303a30

  So is it possible for vSphere CLI through which we can tell if the SCSI disk device can be used as ROW or NOT?

  and what parameter defined as capable of RDM?

  Thank you

  Chandra Sekhar P.

  Hi Chandra,

  In order to get the SCSI LUNS that can serve as RDM, you must use the QueryConfigTarget method. This method is defined on EnvironmentBrowser. You need to recover some EnvironmentBrowser object ComputeResource the HostSystem where the virtual machine is created. The configTarget.ScsiDisk returned after the method call contains the logic unit number information that is capable of RDM.

  I hope this helps!

  Neha

• Qosmio G30: Can I use component video software plug-in to connect the Gamecube or PS2?

  The Qosmio G30 has a VIDEO-IN bit for the red/white/yellow wires... So I wondered if this meant that I could connect my PS2/Gamecube/similar to television, playing games on my laptop, save me money when I move to College :)

  Indeed, if I pretend that I'll put up a set - top box for the TELEVISION, the Gamecube appears under "Video Composite", I just can't save like a channel or anything at this point...

  Someone help? Would be very grateful...
  Thankee.

  Hello
  The s-video-in port can be used to connect and to import data from the external device such as an analog video camera or VCR. Imported video can be edited or written on a DVD disc.
  Video port can be used to connect the external device such as a game console

  I think you should also consult the user manual because you will find the full description on unique ports and use.

• Can I use a disc of recovery for transfers of files, data storage, etc.?

  Hello

  I bought 2 Z580 days back with windows 8. I did recovery disc on my drive external usb hard 250 GB using OneKey Recovery. Can I use tht same drive for file transerfers, store files, etc? Is it possible to make the recovery disc for win8?

  I keep a copy of the okr system recovery backup files in my external hard drive and other files. As far as I KNOW, there is only one program in a usb flash drive that will create the partitions without operating system. No DVD.