Can I use as main OS determining mSATA?

Similar Questions

• can I use my main external hard drive as my hard drive

  can I use my external hard drive as my main hard drive as my internal is full and how to do it thanks

  Hi darrenmchenry,

  You cannot use the external drive as primary drive as the operating system files will be present on the internal drive.

  If the internal drive is full you can always use the external drive to install programs on the computer by pointing the disk as the location when you install the program and make sure that you do not disconnect the external hard drive if you have installed the programs on it.

• Hi I want to get a new email on my phone or can use my maine one

  I can't use my main email to work on my phone, I 2email address & and the two won't on my phone that I have to get a new email to gmail.

  Hi Rego,

  It depends on the type of blocks of security in your work email. I was able to set up my work email account in my Firefox OS device without any problems.

  Please contact your IT Department for more information on SMTP and IMAP addresses and ports that must be configured.

  Please let us know if you have other questions about your Firefox OS device.

  Thank you

  -Ralph

• Can I use "If", "else" statement in main.qml?

  Hello

  What statement I use within the main.qml?

  is there documentation for things and the statement can be used within the mian.qml (e.g. 'if', 'for', 'while')

  Hello

  Engine QML use a JavaScript interpreter.

  that statement is bug in Qt 4.8, so it is better to avoid it or explicit use of braces {} in the case branches. Other than that, it is simply JavaScript.

  Syntax information QML is located on the Web site of the project-qt:

  http://Qt-project.org/doc/Qt-4.8/qdeclarativeintroduction.html

  I suggest you browse the other articles there as well.

• can I use my wireless printer if it is connected to the main computer with the USB cable?

  My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

  My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

  Hello

  A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

  Kind regards

• can I use a flash drive to complete the main memory

  I read somewhere that a flash drive can be used to complete the memory on your desktop

  Hello

  ======================

  ReadyBoost in Windows 7 supports 8 drives and a total of 256 GB. For each device - the device
  must have an access time of 1ms or less. The device must be capable of 2.5 MB/s read speeds
  Random 4 KB indicates the spread uniformly across the entire device and 1.75 MB/s write speeds for 512
  KB random writes spread uniformly across the device.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  More information that might help:

  ReadyBoost
  http://www.vista4beginners.com/ReadyBoost

  What is ReadyBoost
  http://www.winvistatips.com/ReadyBoost-T25.html
  Explore the features: Windows ReadyBoost
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
  many of them are or stretching at least the truth. Look at the sides of the player below and buy
  a you know is FAST.
  
  Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
  is more than you can use it for storage. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  Speed tests USB Flash Drive - any size car - link to the utility USBDeview
  http://usbspeed.NirSoft.NET/

  Publish a speed test of your USB - also a link to the utility USBDeview flash drive
  http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  Keep an eye on ReadyBoost with Windows 7 performance monitor
  http://blogs.TechRepublic.com.com/window-on-Windows/?p=2257

  Monitoring of ReadyBoost on Windows 7
  http://blogs.msdn.com/b/saveenr/archive/2009/05/02/monitoring-ReadyBoost-on-Windows-7.aspx

  I hope this helps.

• Can I use a global variable to determine the event?

  If I want to switch using MouseEvents or TouchEvents, can I use a global variable to switch between the two?

  For example,.

  var myEvent:String = new String();

  myEvent = "MouseEvent.MOUSE_UP."

  myEvent = "TouchEvent.TOUCH_TAP";

  myObject.addEventListener (myEvent, doFunction);

  This does not work, but I was wondering if there was a good way to achieve this so that I can switch between the modes of entry easily during the test across different devices?

  do not use quotation marks:

  var myEvent:String;

  myEvent = MouseEvent.MOUSE_UP;

  myEvent = TouchEvent.TOUCH_TAP;

  myObject.addEventListener (myEvent, doFunction);

• Can we use the same package for main and begotten of concurrent programs.

  Hello
  
  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1? If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?
  
  Thank you
  HC

  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1?

  Yes you can.

  If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?

  When you second the 2nd program it will not work if the 1st program execution, and he has to wait until you have completed the 1st program.

  Don't know what code you use in the first and second procedures or even in the whole, but you can try this in a TEST instance first and check whether or not it works as expected.

  Thank you
  Hussein

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• How can I use my instore credit for a movie

  How can I use my instore credit for a movie

  Hello R Larson,

  I see that you are wanting to use a store credit for a movie. I'll be happy for you have said in the right direction. First of all, let's see if we can find out if the credit is a credit of iTunes gift card or a credit from the Apple Store. This article will help you determine what may be:

  What kind of card do I? -Apple Support

  If credit is iTunes, you can just check your balance using the instructions found in the section below and use to either rent or buy a movie to display:

  See your credit balance - Apple Support iTunes

  If the store is an Apple Store Gift card credit, you would not be able to use iTunes to watch a movie.

  I hope this helps. See you soon!

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?

  Hello.

  And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!

  Maybe someone knows some software sales in which it could be used.

  Hello

  This Quad Core CPU is an additional processor that is not always in use.
  It was designed in the order using the main processor in some of the media process.
  For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.

  In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
  Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures.

• Can I use old time capsule for storage only with a new airport extreme (standard want latest HQ)?

  I have a time Capsule elders (802.11n). I would like to know if I can still use this time Capsule only as a network storage device, if I decide to build my network with a new Airport Extreme (802.11ac). If I can do that, how would I set up the network to continue automatic backups with a router to update?

  To do what you want, the new AirPort Extreme 802.11ac would be installed as the "main" network router The time Capsule would be connected to the AirPort Extreme, using a wired Ethernet cable connection, and the time Capsule should be configured to run in bridge with the service Mode Wireless off.

  Any Mac you want to save in the time Capsule would need to have Time Machine preferences on each Mac adjusted to ensure that the time Capsule has been set as the target for backup.

  If you decide to add the AirPort Extreme, post back for more information at this time, if you need installation instructions step by step.

• For the installation of the satellite P850-30W system - can I use a SSD

  Hi all!

  Telephone tech support couldn't give me an answear good so I try my luck on this forum instead.
  I just bought a Toshiba Satellite P850 30W and what I understand there is a m-sata port available.

  My question is: is it possible to put for example a CRUCIAL RealSSD M4 SSD 128 GB mSATA in this machine, install W7 on it and use it as a OS disk? and use the 2.5-inch slow for storage disk.

  I don't want to buy a new sata m before I know it is doable, I would also like to know the best and easiest to do this, seen a lot of different approaches in different forums.

  IF I install w7 on the m-sata drive can I use the series key provided with the preinstalled windows or what I call MS?

  Thanks in advance for your help :)

  Hello

  The P850 Satellite supports the common SATA controller.
  You can use a common SSD 2.5 drive, that support the SATA interface.

• Can I use my readyNAS is the reconstruction?

  So, I finally got my ReadyNAS running and I can even access my main machine to Windows files.

  I installed the NAS drive for 2 reasons:

  1. to have a second RAID system to hold all my documents and media files while in the case of a death of a RAID system, I have a backup.

  2. If you want to allow access to the media on other computers on the network and possibly in the future, remote devices too.

  The device is it's reconstruction, now, I'm going to assume it's just put in the disc form and implementation of filesystem RAIDX and realize any encriptación.

  But what I want to know, if I can start downloading files on it and use it before the end of reconstruction or if I should not because it may interfeer with the reconstruction process.

  RAIDar is another estimate of 5 hours to complete the reconstruction and I have about 600 GB to download on it before I can update the original RAID array, so if I can start uploading now he would give me a big head start.

  Thanks for any advice in advance.

  You can download now, but you won't get maximum performance (and in addition to that the rebuilding will take more time).

  So it's not speed things up much (if at all).