Several issues having an impact on computer - security alert Windows

Similar Questions

• KB2686509 I'm having a problem loading update security for Windows XP (KB2686509)

  Update security for Windows XP (KB2686509)
  It has the following error code: 0x8007F0F4
  Using XP Professional with Service Pack 3 on a 32-bit system.
  My browser is Firefox 12.0.
  Anti-malware is malwarebytes 1.61.0.1400

  I tried several times and get the same error.

  Visit the link for help on error 0x8007F0F4

  http://support.Microsoft.com/kb/958051

• MacBook Pro lagg issues having an impact on the overall performance

  Hello

  I had problems with casual gal/minute gel on my macbook pro. The problem affects all programs and becomes especially annoying on programs such as Logic Pro X and Adobe Lightroom to photo editing and audio. For example on Logic Pro X will come back even if the error "system overload" did everything that I could to get a smoother performance on the program.

  After a few days looking for a response, I decided to do a general cleaning of my drive. I got more than 50% empty but performance improves.

  After that, I decided to do a new clean install of Mac OS x in the hope that this would solve my problems. I didn't not use time machine for backup, I just copied the files, I needed and have yet to put em turn the computer on.

  After 2 days my problem has not yet been resolved, I tried the PRAM and reset SMC, but it has no effect. Even now as I type with only safari open I short freezes every 10-20 seconds approximately 0.5 s.

  All solutions? I already ordered a new SATA cable to replace the one I think he could the cause of my problems.

  Here are my specs, ram and SSD are updated.

  MacBook Pro (13-inch, mid-2012)

  2.5 GHz Intel Core i5

  Intel HD Graphics 4000 1536 MB

  12 GB 1333 MHz DDR3

  1 TB SSD (samsung)

  I'm under that the latest version of El Capitan and the logic is version 10.2

  Hoping someone can help me

  If you still run with the clean install and you have the same problem. Then, you may be directed in the right direction. If you have an external drive Enclosures or cable usb to 2.5 sata adapter. You can put the internal drive in and check to see if the problem is still there. That will tell you if it is cable or not.

• Delay the start of the security alerts Windows Vista Office

  Why is there a delay when windows vista starts and the time it tells me about Windows security, then to idel alerts? I have no startup programs and this is a clean install.

  Hello

  ·         Since when are you facing this problem?

  ·         Have you made changes on the computer before this problem?

  Method 1:

  I suggest you to search for the cause in safe mode and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to consult the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Updated for Firefox 36.0 now get Windows Security Alert

  Hello

  Updated for firefox 36.0 24/02/15
  Now to get a Windows security alert
  Windows Firewall has blocked some features of this program.
  Name: Firefox
  Publisher: Mozilla Corporation
  Path: C:\program files (x 86) \mozilla firefox\firefox.exe
  Private networks is enabled and grayed out.
  Public networks box is not checked and ask to allow access.

  When I look at the programs allowed through firewall it shows Firefox 2 programs.
  Firefox---(la case est décochée)
  Firefox C:\program files (x 86) \Mozilla Firefox)---(case cochée)

  Also on 24/02/15
  There are updates Windows 7 and an update of definition of MSE.

  When I started the computer 25/02/15 the Windows security alert appeared.

  I have not allowed access to Windows Security Alert window.

  Why this security alert Windows has been published?

  The Windows security alert is the only issue.
  Firefox works normally. He never does not.
  I have internet access on my private network.

  I use Classic theme restaurateur.
  What's interesting after clicking on menu + customize, I moved the icon Hello in the box additional tools and features.

  When updating to 36.0 FF
  Hello icon brought itself automatically.

  I just clicked Cancel on the dialog box and the Windows security alert went away.
  Everything that Firefox still seems to work fine.

  If she comes back, I will inform this thread.

  Thanks,
  

• Computer has been recently hijacked with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since

  Computer was hijacked yesterday with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since then, have been opening several programs such as anti-virus, security, most of the elements in the Panel of control etc. Always can access internet, but only through IE and Mozilla not. Cannot open Outlook Express and need to connect to the sky for e-mail. Impossible to download and run programs as computer application which program I use to open or run the said downloads.  Help!

  It would seem that your registry database has been changed in order to disable the functioning of all. EXE file. You need to restore it, but cannot use regedit.exe to do. Solution: make a copy of the regedit.exe regedit.comappointed.

  Open a command prompt by typing the Windows key + R and type cmd then hit . Type in this commnd:

  copy c:\windows\regedit.exe regedit.com

  ... and click on . Next type:

  Start regedit.com

  ... and click on .

  In the RegEdit program, navigate to the registry:

  HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  In the right pane, double-click the (default) value. Delete the current value data, and then type:

  "%1" %*

  (i.e.: quote-percent-one-quote-space-percent-asterisk)
   
  Close the Regedit utility. Your. EXE files must be start normally now. If the problem persists, or redone surface shortly after this procedure, your computer is still infected. In any event, the execution of full scans with MalwareBytes and your own virus anyti is recommended.

  The complete procedure (for XP) is detailed here.

• Window security alert has indicated that it has detected spyware and adware on my computer.

  Window security alert has indicated that it has detected spyware and adware on my computer. I clicked on the "RemoveAll" button but nothing happened. I tried to shut the computer down, but the warning «system is in danger of crashing» What should I do? Help, please!

  Hello Emily Lee 28,.

  I suggest that you run an online scan on your computer. You can follow the link below to launch the scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• I HAVE WINDOWS FOR SOME REASON SECURITY ANY. THERES A EU ON MY COMPUTER SECURITY TOOLS. AND IT TOOK OVER. AND I CAN'T GET RID OF BED EITHER.

  THIS PROGRAM OF SECURITY TOOLS HAS TAKEN POSSESSION OF MY COMPUTER. I CAN'T SAFELY FILES, I CAN DOWNLOAD MCAFEE. AND I CAN'T GET RID OF IT.    BETTY

  PLEASE PLEASE HELP

  Security Tool is a rogue antivirus application that deliberately gave the system reports of false threats to security on your computer and displays notifications to make you think that your PC is infected with malware or fake security alerts

  To remove it try to scan with

  http://www.Malwarebytes.org/MBAM.php

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  For further shore visit this link

  http://www.bleepingcomputer.com/virus-removal/remove-security-tool

  http://www.howtogeek.com/HOWTO/9505/how-to-remove-security-tool-and-other-roguefake-antivirus-malware/

• Need to do a clean install of Vista - have several issues

  PA bear MS MVP suggested I do a clean install of Vista. I need a hand-holding.

  The first questions are about the instructions contained in this site:

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  ISSUES;

  1. the site says have my Windows installation disc (CD or DVD). I don't have the installation disc, but I made the recovery discs. Can I use them instead?

  2. it is also said to disable all antivirus software before you install Windows. I have installed Microsoft Security Essentials. How can I disable it?

  3. to the question "where do you want to install Windows?" choose which partition?

  Thank you in advance,

  YT2252

  Hello.

  1. you can use the recovery disks you did to reinstall Vista. It's what they are for.

  To reinstall Vista using recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  2 as you do a new installation the hard disk will be wiped clean of the everyting: files, MSE, everything.

  Therefore, there is not need to disable the MSE.

  3. the recovery disks must select the disc / Partition and install Vista updates.

  If not. Select the c: / partition.

  See you soon.

• I think I got several phony calls claiming that my computer is infected with spyware.

  I think I got several phony calls claiming that my computer is infected with spyware. They said that they were connected with Windows, so I asked if they were Microsoft and they said that no Microsoft would not call me. Wouldn't be a darn good Microsoft. The guy was Indian or Pakistani and wouldn't give me a company name, no matter how many times I asked.

  They said they received reports from my computer it has been infected. The last call I let them go through their process to prove to myself that my computer has been infected. They told me to go to the event viewer, logs of windows, applications and said there will be errors and warnings there.

  It was proof that he was infected and that they wanted to give me their approval to scan my computer so their 'Microsoft engineers' can solve the problem with Windows tools. At this point, after 20 minutes, I denied their access to the computer and hung up that it had no proof that I was worried. One of our friends had the same call on fixing Windows sound, she had an Apple Mac, I would have liked to see their difficulty its version of Windows.

  I have 3 questions for this and they are: -.

  1 can. anyone if your computer is infected using the event viewer?

  2 can they tell if she is infected when the computer has a firewall and is also behind a router with a firewall?

  3. I would be right in thinking that there is another form of the scam fake phone call?

  1. If possible, get the errors or warnings in the event viewer is quite common, but say you have a virus just based on that, it's simply stupid.

  2. they do what is called call cold. They call every phone # in the phone book and say "your computer is infected" even if you do not, Yes, it's a scam and yes they are stupid.

  3. Yes. The only way they would be able to tell if your computer has a virus would be if they had access to it, and if they have BEEN with microsoft, which is not, it would be a breach of privacy.

• There are several visual c installed on my computer programs are all nessasary?

  original title: many program

  There are several visual c installed on my computer programs are all nessasary. I am running window vista

  they may be needed. whenever you install a program, some of them requires Microsoft Visual C++ so it installs the version that needs. If you remove one of them, some of your programs do not work.

• is my computer secure?

  Today I just internet browsing (if this is useful in playing 1 Sonny on Kongregate) and Windows Update pops up saying he'll restart as seconds.

  I didn't have to restart at this time, so I went to click 'reporter' for 4 hours, but foolishly, I clicked on 'Restart now' accidentally.

  OK, I wasn't worried, I have to just wait for the update.

  Everything went well spent - he said "full install update part 2 of 3, 19%" for a bit, with the % filling progressively by steps. Then it disappeared, and rebooted the PC.

  No problems yet - but once it's always spent the loading screen where "microsoft corporation", or something is displayed near the bottom, he began to scribble through a list of the locations of files (that I remember before), and everywhere that I saw LISTED in THE REGISTER.

  Now, I had read somewhere before that a sign to have a virus on your system is if you notice the registry being accessed at startup. Then I panicked, and as I didn't want my register being accessed, I pressed the power button to put the PC.

  I know if possible, you should avoid doing this, but I wasn't about to let my registry be messed with and wait for all my files etc had been loaded normally.

  Anyway. The next thing I do is leave TI a minute I feel a little sick of the idea of a Virus on my system again (yes I had a before centuries ago). So, I just go upstairs and turn on the PC to see if things have changed. I was about to start in safe mode, I could not remember which key F, but then after a screen or two (as usual) the PC flashes something on the recovery of the system.

  I know more exactly the screens, as I was not familiar with them, but he asked to check for errors with the system, because the last boot failed. OK, I let check (hoping it was a real thing). He said he found errors, but later asked if I wanted to restore the system to an earlier configuration (last successful startup.)

  I selected Yes, it would take me hoping to return before the error. It took a little time to "restore system" or whatever, but he then finished doing what he was doing and gave me to select "Finish." Before I did it, I clicked on "View report" or something similar and he showed a long list of tests.

  I wasn't sure what they have all along, but they all show 0 x 0 under the bit errors.

  Since then, I have restored the system, and he presented me with health research. Since then, I've noticed nothing extraordinary, and the thing to auto-update not shown yet.

  So, I'm sure? Or what has happened to what is most important? Why didn't we text of registry at startup? Thank you.

  __________________-
  Additional information:

  I checked the updates with the system restore.

  Under the Udates must be installed:
  ______________________

  14 updates released on August 14, 2011 where:

  A security update cumulative for Internet Explorer 9 for Windows Vista (KB2559049)

  A security update for Microsoft .NET Framework 2.0 SP2 on Windows vista... (KB2539635)

  Security for Microsoft .NET framework update 4 on windows XP, Windows... (KB2487367)

  Security for Microsoft .NET framework update 4 on windows XP, Windows... (KB253936)

  as well as KB:

  2536276-2556532-2563894-2567680 - 2468871-2533523

  and:

  Updated the mail filter unwanted windows Mail [August 2011] (KB905866)

  Widows malicious software removal tool (KB890830) [August 2011]

  ^ (particularly wonder about those two).

  On the history of the update, the same updates are listed, a mixture of these success or failure.

  Hello

  Your computer is safe. When windows update is finished and restarts, it changes some registry files to start your computer smoothly.  Microsoft supports the update on every Thursday of the week. If you do not receive an automatic update I suggest you to check if the automatic update of your computer is on or off. Reference:

  Activate the update or disable automatic

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  See also:

  Update your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/updating-your-computer

  Understand the automatic Windows Update

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-automatic-updating

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.