Can I use Labview for my Samsung S3C2410?
Hey guys,.
I have a dev based on Samsung S3C2410 CPU board
I bought at developmentboard.net. See the specs HERE .
My question is:
I want to use LabView on this forum, can I?
Any information will be appreciated, thanks in advance ~
Hi Leon,
Hope you are doing very well. You can use the NI LabVIEW Microprocessor SDK (Software Development Kit) with a string of third-party tools and an embedded operating system to target any 32-bit platform of your choice. Samsung S3C2410 uses ARM based 32-bit RISC microcontroller, so you should be able to use LabVIEW. Please click here to learn more. I hope this helps.
Best regards
Tags: NI Software
Similar Questions
-
How to use labview for controlling the HP Network Analyzer
Hello
I have a HP network analyzer 8720D connect with my laptop by a USB-Gbspecifications FOR cable. I want to use LABVIEW for control to parser do measurement and data collection. What should I start? Where can I get the labview program to control the parser?
Thank you.
Help > find instrument Drivers. Then go to the Instrument Driver Network and read all the links on the use of pilots.
-
Original title: backup Windows found errors on the media during a backup.
original title: backup errors
Whenever I try to do my monthly backup I get the following messages
Backup Windows found errors on the media during a backup on it and can not use it for additional backups.
Pleas write the following label on a blank media and insert it into D: /.
I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?
I now have an error 0 x 81000019
Hello
You did changes to the computer before the show?
Method 1: Check if the shadow copy volume is running
(a) click Start.
(b) in the search box, type Services.msc.
shadow copy Volume c) right-click and go to properties.
(d) select Auto (Delayed) in the start menu type in the menu drop-down.Method 2: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135.Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
Method 3:
Check all your drives to NTFS.
This problem may occur if the drive is not NTFS format.
Please follow the steps mentioned below to convert the reader:
Using the Convert command
1. click on the "Start" button, click "all programs" and click on "Accessories".
2. right click on "command prompt" and click "run as administrator".
3. in the window "Administrator: command prompt", type the following command and press ENTER.
CONVERT %Drive% letter: / FS: NTFS
letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:
CONVERT F:/FS: NTFS
4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:
The type of the file system is FAT.
Enter the name of the current volume of reader letter %Drive%:
Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.
5. when the conversion to NTFS is complete, the following line appears in the command prompt window:
"Complete conversion".
6. restart the computer and check the result.
Hope this information is useful.
-
Hello
How can I use statistics for all the tables in a schema in SQL Developer? and how long will it take on average?
Thank you
Jay.
Select the connection and right-click on it and select schema statistics collection
-
Can I use it for packaging?
Can I use it for packaging?
Hello
Yes, you can. Please check the license terms for more information - Royalty free images, pictures and graphics. Adobe Stock
Thank you
Bev
-
can I use tiff for HDR files in 'fusion HDR Pro' PS cc
can I use tiff for HDR files in 'fusion HDR Pro' PS cc
Yes.
-
I know that I get 2 downloads. I have one on my Mac. Can I use one for my laptop?
Hello david,.
That is right. Cloud software can be installed on Mac or Windows for no extra cost. No platform swap process is necessary.
On the Mac log you just to creative.adobe.com with your Adobe ID and download the software. Same thing as you did on the PC.
Hans-Günter
-
How to use Labview for measuring the reflectance at different wavelengths automatically
Hello!
I'm using labview to communicate with MS257 (a monochromator). If I do not use Labview, I have to use the hand controller (set a wavelength from 300 to 1100 under a grating (a total of four grids).) It takes a lot of time. So I want to use labview to realize the automation. But I don't know how to do, I still can put only a wavelength as a command for MS257, not making any difference.
Does anyone know how to deal with this?
Thank you for your time.
So where are you stuck? It is a fairly common task. Inside of a loop, you can increment the "xxx" and build a table of responses. Look at the Format function in the chain and a knot of shift register/feedback.
-
can I use firefox on my samsung gt 7562 phone browser
can I use the firefox on my samsung gt7562 phone
Hello vssn1949, yes - judging by the specs of the phone that should work...
-
This company online system has been tested with IE. I met a little trouble trying to disconnect. When I log out, it takes me to the login screen, but I'm not disconnected and can not reconnect. I'll try using IE and see if the problem goes away. If so, can I use IE just for this company and use FF for everything else?
Yes, you can even use IE as you are using Firefox, if you wish.
-
PC card - can I use it for?
Excuse my ignorance, but I have a slot for pc card on the side of my laptop (equium L20). What kind of job could I use it for? Some of my games does not work, I put some sort of bulletin of upgrade?
Google for PC cards and you will find many solutions of PCMCIA cards.
Lucky suggested that PCMCIA cards can be used as wireless network card, save etc, tuner TV, adapter, support of information there are many possibilities.
But unfortunately I don t think you will be able to use these cards with all the games. -
Qosmio F20-111: need drivers Vista->; Can I use drivers for F30?
I couldn't find a driver for my laptop vista. Can I use F30 drivers for my laptop F20?
Thank you
Hello
Of course, you can try to install the drivers of Qosmio F30 but the question is: drivers Vista F30 will work?
I think you should be able to install Vista on your F20.
But you will not be able to use the additional features of Toshiba Toshiba controls, keys FN, etc.PS: I found very beautiful thread in the Qosmio G20 section.
Some of the guys discussed about Vista on the G20. Now for the G20 Vista drivers are not available, but FranciscoJr has handled this problem. -
I can't use iCloud for backup of data from third-party applications
I use an iPod touch 6th generation and I wanted to use iCloud for backup of Twitter, IG, Pinterest etc. I've tried searching steps. So far I've been finding the same set of instructions:
Settings > iCloud > storage > select your iDevice > turn on apps you want to iCloud to save
But after clicking on the storage, I don't see that 'manage storage' and below, the option 'change of Plan '. Why does my iPod not not the option choose iDevice? I can see the option to save the data of integrated applications, but not applications, third-party. My iCloud that unit is on but my Photos under icloud is disabled. I really need the extra space. What seems to be the problem?
Click Manage store (settings > iCloud > storage > Storage manage and you see what moves backup iCloud storage.)
-
What version of daqmx can I use LabVIEW 7.1 om windows 7 x 64?
I couldn't find something that is specifically says what version of daqmx for use, or if this configuration does not work. I'm running Win7 x 64 and am using Labview 7.1
Is not serious
LabVIEW 7.1 is not supported for Win 7
Download language: English
Product range: LabVIEW
Version: 7.1.1
Release date: 01/11/2004
Type of software: Application software
Operating system: Windows; Windows XP; Windows NT; Windows 2000 -
can I use labview 8.01 whit usb device 6009 with vista home
can I use 6009 with labview 8.0 and Windows Vista home OS usb device?
LabVIEW 8.2.1 is the first version that is compatible with Vista. While 8.0 could operate, NOR offer any guarantee.
Maybe you are looking for
-
Portege R700 - @ button and "are interchangeable.
Hello the @ button and the "buttons are exchanged for example when I press on I get" "" "quote markes and vice versa."Does anyone else have this glitch, or / and know how to solve? see you soon
-
do remote debugging - switch works / of via ini?
Hi, I have read and understood how to debug remotely a VI - it works pretty well.My question is - can I set flags "Wait for debugger on launch" and "Enable debugging" in the specification to build for the stand-alone application in real time for all
-
I need to download a driver for a lexmark x 85 scanner and I have vista
How can I download a driver for printer Lexmark x 85 with Vista? I don't have the disk.
-
What is the latest plugin for Photohop Lightroom for Windows?
What is the latest plugin for Photohop Lightroom for Windows?
-
Cannot import of existing XP Mode VM in the drive
HelloImport with seams Vm Player works well, BUT the created virtual machine is ALWAYS an empty Windows XP machine.I never have my XP mode machine.The string xpmode. enable= "TRUE" in the .vmx, the activation key is not necessary. "The hard is less t