Portege R700 - @ button and "are interchangeable.

Similar Questions

• Portege R700: VAP and Touchpad download error (119 and 120)

  I tried to download value pack and touch pad programs
  However when I tried to run the downloads I get errors for touchpad 119 and 120 for the added value.

  What should I do?
  I can't properly use the F5 function and the touchpad.

  On the page of the Toshiba UE driver in area protected R700 you can find drivers for Win 7, Win 8 and win 8 upgrade. For each system, there are various packages VAP and touchpad drivers.

  I put t know what PPV and the touchpad, you mean but in my case, I was able to download the VAP and touchpad for Win 7 and it worked correctly.

• Portege R700 - Telstra and Dodo SIM cards disconnection

  I have a new R700 and I am having trouble using my Telstra cards or Dodo SIM internally using the Toshiba Wireless Manager. Two of cards using the USB modems however if used internally during the connection work, it immediately fails and says "disconnected". The signal levels are good and all networks are detected ok. All network configurations seem to be correct. Can someone help or advise on the use of these SIM 3 G in Australia on the R700 cards?
  Chris

  The card SIM of Telstra can lock onto the USB Modem. You will have to perhaps call Telstra and ask them.

  Also, check that the AFN.

• Portege R700 - unit to replace DVD with SSD

  Hello world!

  This is my first post in this forum.
  I searched for an answer to my problem and I have not found it so I opened this post.

  I bought a Portege R700-PT311E there are a few butterflies and now I want to install an SSD in the DVD slot. -Does anyone know if it is - it possible?

  I want to install the OS on the SSD drive and let the 500 GB HARD drive to store information.

  Thank you very much in advance,
  Edu

  TrackSmart thanks for sharing this with us!

• Portege R700 - saver installed on Windows 7 64 bit

  Hello

  I was looking for a way to reduse noise from the fan on a Win7 Portege R700-174 and read to install 'Energy savings' from the Toshiba support site.

  Installation was OK, but I can't use ist because common Module is not installed. I get an error ' Code: 0 x 2. I already understand that 'Save energy' and 'Common Module' is not designed for windows 7. Why I was able to install it anyway?

  Now when I try to remove the 'save energy', I still have another error and uninstall fails.

  What can I do? Any help is appreciated!

  Concerning
  Michael

  Hey,.

  Toshiba common modules and energy savings are designed for Windows XP only! This software isn't compatible with Vista and Windows 7. In this case, you need to install the package of added value.

  In any case, not it s too late and you need to remove the installed software. If you get an error when uninstalling, I recommend the use of CCleaner to remove programs. CCleaner can also uninstall all the software that you have installed and it s freeware tool. Do a Google search for download and try to uninstall tools Toshiba again.

  Check this box!

• Cannot use 8 GB in Portege R700

  Hello

  I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

  I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

  I put in the memory which consists of:
  1 x 4 GB PC3 12800
  1 x 4 GB PC3 10600

  The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

  If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

  I tested the ram with Memtest and they pass the tests.

  If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
  If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

  If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

  I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

  Anyone can shed light on the problem?

  Hi Borito

  If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
  By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
  I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

  Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.

• Portege R700 PT311E-I'm looking for the Bios v1.50

  Hi everyone :-)

  BIOS v. 1.50 seeks model r700 toshiba pt311e sold for example in Poland.
  On Toshiba download page is only new version 1.60 but I need previous version 1.50.

  Can someone help me and send me by email? [email protected]

  Thank you very much.

  Hello

  Unfortunately, Toshiba driver European page simply provide new versions BISO.
  But I also found versions older BIOS on the page of the Toshiba driver we.
  [Portégé R700-S1320 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2682554& rpn = PT311U & modelFilter = R700-S1320 & SelCategorie = 2756709 & selFamily = 1073768662]

  But it s for Portege R700-S1320 and series PT310U / PT311U / PT314U
  So maybe it of the same BIOS which is designed for Portege R700 PT311E (E means European U us.)

• Portege R700-1CQ - ECO Utility and buttons mouse pad not working not

  Suddenly the ecoUtility buttons and activate/deactivate mouspad has stopped working?

  The ecoUtility works if started manually through programs but is not starts when you press the ecoUtility button...

  The mouspad is not disabled if you press the button...

  I already deleted and reinstalled the ecoUtility and value added package - no results?

  It runs under Windows 7-64 bit...

  The help is apreciated...

  Concerning

  Hello

  Hmm. you are able to activate the Eco utility manually, but it does not start automatically when you press the button.
  This means that there must be a problem with some command buttons that run the applications.
  Usually the PPV control multimedia keys and so the new facility should fix this.

  I think you should try this;
  Firstly uninstall the VAP system.
  Then, clean the windows operating system using the free tools like CCleaner for example.
  This tool cleans garbage temporal files and the registry.
  I think that some damaged registry entries can cause this
  Restart the computer and then install 64-bit VAP.

  Good luck

• Portege R700 - some buttons not response

  Hello

  I bougth Portege R700 and now I'm in trouble.

  the button to turn off the touchpad that does not work.
  the button on the right top of the keyboard (the Green key), do not pass the pc from normal to eco, but open windows Mobility Center.
  When I press th FN key + others like volume, for example, I have no information on the screen.

  also why ligth for wlan is always also activate when
  I disable the WiFi (orange ligth under the touchpad)

  Thank you
  I have reinstall PVAT, but nothing changes.

  Please could you help me to find all the functions of my laptop.

  runs in WIN7 x 64 french.

  Thank you.

  Post edited by: sapeur3873

  There are too many different questions and if you try to fix one, it will take too long and there is no guarantee that you will have success with it.

  Best thing you can do is to restore laptop to factory settings and start using it for laptop with out of the box. After doing this in a first time check it and make sure that everything works correctly.

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• Portege R700 - upgrade Windows 7 32-bit to 64-bit and memory question

  I recently bought Portge R700 and am disappointed by the memory. I have a license of Windows 7 64-bit edition: what problems can arise if I update? Once installed, I can then use 8 MB of RAM.

  Moreover, I found the reagrding misleading Web site the option of using the 8 MB of RAM with the32-bit OS. I have 4Mb installed, years to see that only 2.86 MB is usable.

  I get "out of memory" messages and would like to know how to allocate more memory to live for video.

  Tom's right. If you want to use the 64-bit operating system, you must do clean install operating system. All drivers and tools specific to Toshiba and utilities must be installed Additionally one by one.
  If you need assistance with installing Win7 let us know.

  I put t know for what purposes do you use your laptop and what applications are important for your daily work, but, in general, I don t think you will have problems using 64 bit OS. Please keep in mind that all additional software is 64-bit capable and everything will be OK.

  As far as I know laptop user doesn't have the influence of the use of video memory and it runs automatically. It is unclear to me that you can change these settings and set how much RAM can be used for video operations.

  Anyway, Portege R700 is nice for laptop with sufficient power for daily use and also for use with standard applications. I don t think you ve bought this laptop for games.

• Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

  Hello

  I got a Portege R700 with Windows 7 64 bit.
  This machine starts very slowly after the log in user mode only.
  The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast.

  Thus our directors thought it might be the Toshiba Software and a lot has been disabled or uninstalled.
  Because this did not help and because I thought that it migt be cause of Kaspersky, I started to reinstalled and update the software from Toshiba. Most of it works now. Shortcut keys does not work, then I start TfcRst.exe via autostart now, even he would somehow it would be better in 'systemecommencent '.

  But still some keys do not work. The Tablet touch power switch, just above the touch pad does not work.
  The Fn F9 works. And the two keys to the right upper corner (ecoUtility/off button and the presentation-Key) do not work. In all three major, I get a pop up saying "this function not taken in charge.

  Anyone has any idea of this?

  Thank you

  Solomon_de

  Hello

  Why you n t try to restore the operating system back to the same state until the administrator has removed or uninstalled the Toshiba Software?

  Generally speaking the VAP (value added package) controls the multimedia keys.
  Also the FN keys require the VAP and Flash memory card Support utility.

  Welcome them

• Portege R700 - Sandforce SSD OCZ and Toshiba BIOS v1.9

  Hello

  It is a question to the Toshiba techy guys. Please can someone confirm compatibility with SSDS OCZ Vertex2 (Sandforce) with the Portege r700?

  Since I've updated the stock HARD drive I had problems with BIOS recognizing the SDS when you restart. If I boot the laptop from the cold, that is nice, DDI is recognized and everything is ok, the problem is intermittent. When requiring to restart the laptop to Windows 7 (64-bit), it hangs at the screen Toshiba Leading Innovation. It seems that the BIOS cannot detect the drive for some reason any and just freezes. I read the threads on the footprint software but am already run version v1.0.2.32 - so think it is independent.

  I've recently updated firmware OCZ Vertex2 to v1.32 hoping that it could solve the problem and there is not. The question might be more compatible with the Toshiba BIOS Sandforce.

  I am running the BIOS v1.9 - please can you guys do something to fix this?

  > That's obviously a problem with Sandforce
  Always is it that there are several different manufacturers of SSDS, and it might be possible that not all the parties meet the same standards.
  In this case, many manufacturers of SSDS provides updates of the firmware, but this isn't always the case so have to test other SSDS

• Portege R700, Windows 7, mounted sudden fan/cpu, freeze and force stop

  Hello

  I have a persistent problem that starts to become annoying... Portege 700 running Windows 7. Normal use (office, WMP, IE anything heavy)

  No apparent reason (no new requests started for example), there is a sudden increase in the speed of the fan which should be max (looks it takes off) and I suspect use of the processor at the same time. And it's that it's not simply to stop (I left for awhile on occasion) and does not match an input (keyboard or mouse). The only 'solution' is to use the power button to force a shutdown. (And then I lose all cookies etc. when starting again).

  I did a lot of Googling on that. Thought it was WMP network sharing Service and has taken measures to see, but have recently disabled that service and still the problem occurs... (I checked that it is always disabled when just rebooted).

  I keep as 'clean' as I can (have AV installed, use ccleaner regularly etc etc) so would be surprised if a virus/worm, but am running a scan again just in case...

  This happens quite often be a pain - and I have no idea what is the cause, if any ideas gratefully received.

  Thanks in advance.

  Tim

  Hello

  I m no owner on the site Web of Toshiba Portege R700 but I found an article that describes EXACTLTY the same problem. High activity of its use and CPU fan, then it freezes :(
  Here is the link to this article:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software could help get rid you of this problem. :)

• Difference between Portege R700 and Satellite R630

  What is the difference between the two models, Portege R700 and Satellite R630?
  Is it only fingerprint, port dock station reader and a more powerful configuration (CPU, SSD, WiFi 802.11n, Type)?
  Is this the same materials used body? Is it the same weight?

  I found this comparison:
  [http://www.ultra-laptops.com/comparisons/toshiba_portege_r700-s1330_vs_toshiba_satellite_r630-131]

  Hi snicker_1,

  There are many differences between these models and also, there are different R700 and R630 models on the market.

  In my opinion, you should check these notebooks from Toshiba Web site. There you can see what models are currently available and the configuration.

  Satellite R630 page:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/B2C-satellite-R630

  Portege R700 page:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/B2B-Portege-R700