Can make a record hard damaged by mistake of connection of the power cord on the jumper pin?
Hello
I tried to upgrade my HD, but I connected by mistake the SATA power cable to the axis of the lower rider after mistakenly removing the jumper shunt
May I know if this could have damaged by HD?
I tried to connect in the way justifiable but the system might not always detect the drive.
What are the possible causes and how to overcome it?
Thank you
Low
A Sata hard drive shouldn't have riders, so make sure you have the jumper in the right position and the cable correctly connected IDE.
Tags: Windows
Similar Questions
-
Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem
Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?
The DVD player worked before HARD drive went bad now, it won't work.
And I just replaced the HARD drive, but now cannot load an operating system that he...
Help, please...
Hi dynamitenews
1. are you able to boot to the desktop?
2. what happens when you try to start the computer?You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.
Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questionsIf nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
BIOS WARNING-
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.I hope this helps.
-
How can I make my PC act as a router to connect to the Internet?
How to make my PC act as a router
Hey Microsoft,
How can I make my PC act as a router to connect to the Internet?
Could you please let me know? What should I actually configure the router?See you soon,.
Charel SisouvongHello
You need Virtual WiFi:
You may not have that unless you try to connect to other WiFi devices via your computer and
many WiFi devices and their drivers do not correctly support the virtual pilot.Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
(Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
one.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
(Those become your fonts of rescue system manufacturer).Repeat for network card (NIC) and is a good time to get the other updated drivers as
Windows 7 like the updated drivers.==========================================================================
More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
support the virtual device or is not required then it can be disabled).The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
known issues (Intel, Realtek, LinkSys and others).Windows 7 adds native Virtual WiFi from Microsoft Research technology
http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/How to setup virtual Wifi in Windows 7 without any additional software
http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htmConnectify allows possibility virtual WiFi in Windows 7 machines
http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/On the wireless network hosted
http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspxBuild a Wireless Home network without router - see Windows 7 section
http://www.labnol.org/software/wireless-network-without-router/11494/Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/=========================================
3rd Party Solutions
Connectify is a software easy to use for Windows 7 computers router.
http://www.Connectify.me/Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
http://virtualrouter.codeplex.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello
I have a single page in the portal of webcenter spaces, which is the default portal in the webcenter application. This single page has 6 or 7 like Home tab and the other tabs. Whenever I logged in the webcenter I can see the url redirects to my default portal but it doesnot get home tab made, instead, it shows the tab where I left just before disconnected tab.
For example I have tabs A, B, C, D etc... I have logged in to the application portal and I did something in tab C and then I logged. After once again I re-login, I see this tab C shows, but I want to see that tab must be returned. Someone help me how to make a tab by default whenever I have connection to the webcenter portal.
Thank you
Ashok Laura.
Hello
This is an expected behavior as his persists the State of users. I did face this problem before and solved by setting the disclosed condition of showditailitem programmatically.
Please check below the code for your reference. Invoke the bean managed prior to the loading of the page to
{} public void onPageLoad (PhaseEvent phaseEvent)
If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}
If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}
If (this.newsPanelTab! = null) {}
List
childUIComponent = this.newsPanelTab.getChildren (); If (childUIComponent! = null & childUIComponent.size () > 0) {}
for (int i = 0; i)< childuicomponent.size();="" i++)="">
If (childUIComponent.get (i) instanceof RichShowDetailItem) {}
If (i == 0) {}
((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);
} else {}
((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);
}
}
}
}
Thank you
Amey -
Can I have two HARD drives in my d7-1448 of the Pavilion notebook?
Can I have two HARD drives in my d7-1448 of the Pavilion notebook?
How do you know that one to replace or should I replace both?
Hi, Bill:
I like this one... (and so do a lot of other people if you read the comments).
http://www.Newegg.com/product/product.aspx?item=N82E16822136280
Paul
-
Original title: Windows Fax & Scan
Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.
The error that says:
No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.
the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.
What can I do?
Daniel Capelle
The scanner came with a CD to install the software? Some more recent does not come with a CD, you must go to the Canon Website and you get the software.
-
How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?
How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?
Hello
Based on this and that is not a printer ready network. Has a network card?
Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.Good luck.
-
Wireless connections
I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?
Hello
I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?
You can also try the following methods and check if it helps.
Method 1:
Update a network adapter driver.
Method 2:
Troubleshoot network adapter problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
Can make comparisons Records without functions or PLSQL
I'm used to write Oracle functions to save comparisons, but on this project, managers do not want to use the functions or PLSQL
Is there a way to do the following with a SQL rather than write a function: see all data below? Oracle 9i.
I have the following data set used to track packages that are moved from warehouse to warehouse on trucks
I want only to retrieve a record if the starting location is Dallas Ft Worth and end location is another city.
I don't want to retrieve a record if the package moves between other cities (for example, Boston and New York)
For this set of data package 1324 was added and removed to warehouses in Dallas 4times trucked 735 front finally moved to a warehouse in Boston by the same truck
I want the query to return the next record
105273 345 1324 725 11/3 / 2010 14:32 11/3/2010 15:46 dallas Ft Worth WH4
Showing the last location in Dallas until he was moved to Boston
I don't want to return records Boston or NY or the Dallas Ft Worth the previous Records.
The way the system updates the records is as follows:
If a package is added to a warehouse of the record gets an extra date.
When it is removed from the system updates the deletion date of this same record
Once it is added to a new warehouse there is a new record with an additional date and null for the deleted date unless he leaves this place
In the recordset if the date of removal is null then it is the current location of the package
CREATE TABLE emplacement_module
(track_id NUMBER (10))
, sender_id NUMBER (10)
, package_id NUMBER (10)
, truck_id NUMBER (10)
package_add_date DATE,
package_remove_date DATE,
, city VARCHAR2 (50)
, VARCHAR2 (50) warehouse
) ;
INSERT ALL
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (100012
345, 1324, 725, 04/08/2010 14:39:48, 04/08/2010 14:53:07, "Dallas Ft Worth", "WH1")
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (100016
345, 1324, 725, 04/08/2010 14:53:07, 09/30/2010 10:41:01, "Dallas Ft Worth", "WH2")
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (103055
345, 1324, 725, 30/09/2010 10:41:01, 03/11/2010 14:32:14, "Dallas Ft Worth", "WH3")
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (105273
345, 1324, 725, 11-03-2010 14:32:14, 03/11/2010 15:46:22, "Dallas Ft Worth", "WH4")
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (105284
345, 1324, 725, 11-03-2010 15:46:22, 22/11/2010 11:55:18, 'Boston', "WH34")
IN emplacement_module (track_id, sender_id, package_id, truck_id, package_add_date, package_remove_date, city, warehouse) VALUES (106674
345, 1324, 725, 11/22/2010 11:55:18, NULL, 'New York', 'WH56')
I tried to do a query with a subquery... the main request was all the records with Dallas Ft Worth and then the subquery was to check if the location wasn't Dallas Ft Worth, but so far I could not quite get the correct dataset.
Any help is greatly appreciated. I don't know if there is a way to do it with just an sql query, if not other suggestions are welcome!
Thanks in advanceI added a few lines to your table, back from New York shipping package in Dallas on another truck, then return to Dallas for New York in order to ensure, I understand the requirements.
SQL> SELECT * FROM package_location; TRACK_ID SENDER_ID PACKAGE_ID TRUCK_ID PACKAGE_ADD_DATE PACKAGE_REMOVE_DATE CITY WAREH ---------- ---------- ---------- ---------- -------------------- -------------------- ---------------- ----- 100012 345 1324 725 04-aug-2010 14:39:48 04-aug-2010 14:53:07 Dallas Ft Worth WH1 100016 345 1324 725 04-aug-2010 14:53:07 30-sep-2010 10:41:01 Dallas Ft Worth WH2 103055 345 1324 725 30-sep-2010 10:41:01 03-nov-2010 14:32:14 Dallas Ft Worth WH3 105273 345 1324 725 03-nov-2010 14:32:14 03-nov-2010 15:46:22 Dallas Ft Worth WH4 105284 345 1324 725 03-nov-2010 15:46:22 22-nov-2010 11:55:18 Boston WH34 106674 345 1324 725 22-nov-2010 11:55:18 New York WH56 106675 345 1324 804 25-nov-2010 09:55:18 30-nov-2010 15:46:22 Dallas Ft Worth WH4 106676 345 1324 804 25-nov-2010 09:55:18 01-dec-2010 15:46:22 New York WH42
Given these data, you do not want return 105273 and correct 106675 track_id?
If so, then something like:
SQL> SELECT track_id, sender_id, package_id, truck_id, package_add_date, 2 package_remove_date, city, warehouse 3 FROM (SELECT track_id, sender_id, package_id, truck_id, package_add_date, 4 package_remove_date, city, warehouse, 5 LEAD (city) OVER(PARTITION BY package_id 6 ORDER BY package_remove_date) next_city 7 FROM package_location) 8 WHERE city = 'Dallas Ft Worth' and 9 next_city != city; TRACK_ID SENDER_ID PACKAGE_ID TRUCK_ID PACKAGE_ADD_DATE PACKAGE_REMOVE_DATE CITY WAREH ---------- ---------- ---------- ---------- -------------------- -------------------- ---------------- ----- 105273 345 1324 725 03-nov-2010 14:32:14 03-nov-2010 15:46:22 Dallas Ft Worth WH4 106675 345 1324 804 25-nov-2010 09:55:18 30-nov-2010 15:46:22 Dallas Ft Worth WH4
John
Published by: John Spencer on August 14, 2011 14:22
Operator non-display sets
-
Perform a hard reset when you are connected to the computer?
Hello
my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.
Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.
Thank you
Jesse
You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,
-
I recently purchaced a Netgear wireless router, I can't get any Internet access every time I connect to internet
Hello
Your computer connects to other networks wireless?
Check with the Netgear support, their online documentation, firmware and ask for their
Communities and Forums.NetGear
http://www.NETGEAR.com/NetGear - Support & community
http://support.NETGEAR.com/app/NetGear - Forums
http://forum1.NETGEAR.com/-----------------------------------
Have you checked the updates or re-installed the driver of your WiFi? Check with the manufacturer of the system (motherboard
Manufacturer of custom systems) If an edge device and/or the manufacturer of the device.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I can't print email address, even if I am connected to the internet
I have a printer (cable) 6500 has connected to my home network via ethernet cable. The printer's IP address is 192.168.1.xxx
I can print, fax and scan.
When I try to print the printer by setting address > Web Services Configuration > address Email of the printer, I get this error: "the printer could not connect to the server.
What I am doing wrong?
Thank you.
The problem is solved itself.
When I turned on the printer this morning, the address e-mail printed on its own page. I think it was a problem of HP Server, not an isue of the printer. The printer is set up ok.
-
can I use my wireless printer if it is connected to the main computer with the USB cable?
My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.
My question: can I use the printer to the host computer by USB and computer laptop through wireless? If yes how to configure connections? Thank you.
Hello
A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.
Kind regards
-
I bought Acrobat and when I finished installing, it could not connect to the internet to activate properly. I contacted my computer at work and it showed no problems with the firewall (which took us down to the installation) or our network.
I also tried to use the phone activation, but the 2 numbers that the software provides are disconnected or simply false. I thought they might be outdated, so I checked on the Adobe site. 1-866-772-3623 does NOT work when you dial the number. I tried several times a day for more than a week. The number of other (1-206-675-6222) is not even a job number. What am I supposed to do?
I have the serial number and the number of Activation and the Activation Type. But I can not activate the software without the authorization Code. Can someone help me with this realization that I made any good up to this point? Is there a more current phone number to try to reach the hotline for phone activation Adobe?
-Paul
unless you have acrobat 7 or more, check your hosts file.
for assistance only and other common problems, sign activation, or connection errors. CS5.5 and later, Acrobat DC
If you have an older version, the activation servers are closed. What's this (v. 7) the problem?
-
How can you remove recorded on all google search results: home at the start of firefox?
I like to keep google search, as it is in terms of use as the search engine. I do not wish to change this. I would like to reset or clear the search results of the search bar on the start about page however: home. Is this possible and how can I do? East - somethings that I have to reset in the about.config file? I have already reset the mstone, adjustment and the results are still there. Thanks a lot for helping me with this problem.
Follow these steps to delete the recorded data (form) in a drop-down list:
- Click on the (empty) input field on the web page to open the drop-down list
- Select an entry in the drop-down list
- Press the DELETE key (on a Mac: shift + delete) to remove it.
Maybe you are looking for
-
How to buy a magsafe 2 replacement duckhead
I can't find how to order a duckhead replacement for a Magsafe 85 2 watt PSU. American 120-Volt version.
-
Automatic update of Firefox is to install additional software?
I find research protect and Optimizer Pro on many systems that I fixed, and I've isolated it's to proceed with the installation as a free add-on to another program, and they all seem to have Mozilla Firefox... When the automatic update occurs, it is
-
Hello I use two ipadpro with two pencil pro as a musician. human beings have got two hands, multitouch is ten points for 15 years (even on less expensive Tablet), apple leads the future, but pro pencil is monotouch. How can I get a free my pencil bot
-
You can add chapter markers... I know they went from iMovie 10.1
Very frustrated with the iMovie 'upgrade', but I have already imported and edited the video so new that it is not possible to go back to the old backups. My frustration is the lack of chapter markers. If I want to burn to a DVD or look in other softw
-
Cannot open disk by double-clicking after Windows update
Cannot open the drives by double clicking I use windows 7 and after that windows update today (KB2454826 and KB2419640), impossible to open the drives by clicking twice. However, I can open the discs in a right-click then click "open in a new window.