I recently purchaced a Netgear wireless router. I can't get any Internet access every time I connect to the internet.

Similar Questions

• orangle flashing light on netgear wireless router, but have internet via a modem... Please help

  I am connected to the internet via an ethernet cable via the modem I have, but the netgear wireless router that I have demonstrated a blinking orange Internet when I try to connect wirelessly, I tried to reset the router and the modem and had no luck, I also tried to penetrate in the maintenance of netgear online but who also won't allow me to enter. Finally I tried to release and renew my through the cmd ipconfig and shows an error message saying that the media is disconnected... Please help me

  Hello

  I suggest you to post the same question in the NetGear forums for support on the NetGear router and check if it helps.

  http://forum1.NETGEAR.com/

• NETGEAR Wireless Router WNR2000

  Hello

  Can anyone helpout a first time user on bulletin boards.

  I have a netgear Wireless Router WNR2000 I'm trying to implement the Protection Option wireless in Network Magic

  but it tells me that it can not install this feature for this router.

  I used to have a d-link and it was no problem I would appreciate using one of you kind of people on this forum.

  See you soon

  John.

  Hello.

  Welcome to Cisco Home Community Forums. Do I know what particular device, Cisco and Linksys, you?

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My iPad is not able to connect to my wi - fi network. I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.

  My iPad is not able to connect to my wi - fi network.  I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.  I'm invited to a password, but don't know what it is.  I'm looking for the password?

  Assuming that you have a wireless router at home that you need to know the wireless network SSID, encryption type (IE. WPA2 or WPA for example) and the encryption key and password / password.

  Many routers appear encryption key wireless to plain text. Copy in the iPad. Check the router site users manual or support to help manufacturers to enter the config pages.

  If the router does not have the key, you can also see in the properties Win 7 Wireless for your home network. Open network and sharing Center and click on Manage wireless networks left. Right click on your wireless network and select Properties. Click theSecurity tab and checkShow characters . Provide the administrator password to see the key.

  http://sdrv.Ms/Spor94

  More help from Apple...

  http://www.Apple.com/support/iPad/Assistant/WiFi/

  Apple iPad WiFi support forums...

  https://discussions.Apple.com/community/iPad/using_ipad?view=discussions#/?tagSet=1188

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• I can't get my internet to open using my wireless connection, what should I check for?

  I can't get my internet to open using my wireless connection, what should I check for?

  Hi RosaSchiroo,

  1. are you able to access internet via wired connection?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message or code?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You try to start a wireless router for my laptop. Can't define a wp5 Netgear wireless router should I can work only.

  Trying to set up a Netgear wireless network so I can use my laptop in the entire House.  I do not see the wireless on the screen.  Impossible to recognize that, if it is, is my wireless.

  Hello

  -Have you tried to update the network map?
  -You are aware of any changes made on the computer before this problem?
   
  Follow the steps described in the items listed below and check if it helps.
  
  Method 1: Uninstall the network adapter in Device Manager and reinstall the drivers for the network adapters on the manufacturer's Web site and check if the problem still persists. See the below link that can help you.
  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
  
  Method 2: So I recommend that you follow the steps from the link below and check if that helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Hope this information helps.

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cannot connect to new modem/wireless router with Dell Inspiron 510 M, but our other machines will connect without problem.

  Old modem/router died, received the new modem and Netgear router separate from Comcast

  Two other laptops (MSI Wind Windows XP, HP 6930p-Windows XP) and my Samsung smartphone connect with no issues.

  Dell Inspiron 510 m is able to connect to the network without wire of a neighbor, but none of our other machines are able to because of the configuration of network security.

  When the network security key for our network on the printer Dell, Dell dialog box displays only 8 digits, but the security key is 10.

  Hello

  Replace the key to WEP (wired equivalent privacy) security check and the settings of the router if you are able to connect. Follow the steps mentioned below.

  Change the WEP key in Vista:

  a. click the Start button.

  b. click Network in the right column in the start menu.

  c. click Network Center in the menu bar horizontally.

  d. click reorganize wireless networks.

  e. double-click the wireless network you want to change.

  f. click on the Security tab.

  g. changing the network security key and the encryption type.

  h. click OK.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get Firefox to use more than 12.5% of the capacity of my modem wireless?

  Only if you use Firefox, pages take forever to load. Use of my wireless router in looking, I found that it runs in general (with just Firefox, no other program running on the internet) to 0% or 0.0%, with few spikes up to 5%. Even when you try to view a video.

  When I download something, it could rise to more than 12.5%, for a bit, but I never saw that he hit even 50%.

  When I'm doing something which seems that it takes more ability to my router, Firefox instead takes a bit of my CPU, I'm guessing that there is a lot to ask where are the packets of data or something.

  I have no proxy, or restart Firefox update worked, nor has completely rebooted my computer. I adjusted my network connections down, then back to the top, and all that did was make it so that I can't watch youtube videos, which she usually takes me a few tries to load in a resolution that will not hurt my eyes, and it is with an add-on that makes it so that they are forced to play in HD!

  OK, it's alright with the ISP part - I thought, as had shown activity wireless adapter testing with IE more like what was expected.

  I've also updated the two FF (not something I want to do, as it rarely is compatible with my Add-ons update. My set up is fine, it works, why should I change to something that will not be?), and an update of the computer (which, Yes, I should do it more often. A final which will automatically but has been massive, however and literally broke my copy of FireFox. It was boring!).

  I still feel like it runs too low, but at least the videos loading and read without problem now-well, for the most part.

  They load, kick up an error for a few moments and then screen reload and then play correctly. I guess I can live with that.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.