Can move us the child member of some parents to the other Parent as child member

Similar Questions

• KB951847 fails to install and I can't install the other updates since there is no.

  I tried every proposed difficulty and can not install the security updates and I can't install the other updates since there is no.  I tried the fixit, the convenience store.  I get no error number - the name of the updated and say update has failed.  I tried the fixit suggested in default and aggressive modes.  I tried stopping the service to update and it starts again.  There is no place for uncheck do not install this update.  The center of update gives me only one choice of what to put up-to-date and KB951847.  I tried to disable the start-up all elements of microsoft services and restart the computer and that did not work.  I'm out of ideas.

  Thank you.

  KB951847 is an optional, not security updates (Yes, even if it is an Important update). Feel free to hide it & move on with your life.

• When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  Try switching your Notes on / off under settings > iCloud or maybe restart the device-restart your iPhone, iPad or iPod touch - Apple Support to see if this could solve the problem.

• I have 2 different accounts on the same sites. Whenever I go on this site, one of my usernames prefills the field of the United Nations, and I can't access the other account. I can't replace my pre-filled username. Ideas?

  I have 2 different accounts on the same sites. Whenever I go on this site, one of my two (always the same) identifiers pre fills in the username field and I can't access the other account. The Web site legitimately refuse my password. I can't replace my username pre-populated because the second I hit enter to open a session, the initial username is rewritten in its field. Or user names is registered by firefox anywhere in the "Tools"; Options, security, advanced, or fields from the privacy menu.

  I noticed that this Web site has installed a cookie on my computer called "_rememberme" that contains the user name plaguing me.

  This is a Web site that I have access to very sensitive and important information, and I have to have two accounts available at different times.

  Thanks, Joshua
  XP, sp3; FF3.6.3

  This has happened

  A few times a week

  == I added the second account on this Web site.

  You will need to disable that remember me cookie, and make sure that you remove a tick to remember you on this Web site.
  Tools > Options > privacy > Cookies: "show the Cookies".

  You can disable the automatic filling of a name and a password.

  See:
  http://KB.mozillazine.org/Password_only_filled_after_entering_user_name
  http://KB.mozillazine.org/signon.autofillForms

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• Can't see the other Web sites I created

  In BusinessCatalyst, I'm doing the dashboard of one of my sites, and it let me just get one, not the other. Can someone tell me how to change the dashboard from other sites I have the catalyst?  Using the old interface of catalyst that I could move around, it seems now I'm stuck on one site and can't seem to others.

  Very frustrated!  Help, please!

  Annette

  Oh my God, Brad, who did it!  Thank you, thank you, thank you!  I was just about at my wits end!  Geez, you'd think go on your dashboard would you outline your sites and make it easy for you to access all of them.

  Anyway, I'm not on and on, but I thank you very much for your quick response and accurate!

  Annette

• Somehow, I lost my additional address books when I imported a .csv file. They where all there and I can't find the other 2 so pls help

  I had provided both with Thunderbird and I imported a new address book via .csv. Everything was good until somewhere, I closed this address book and the other two have disappeared. What could have happened, or how can I get these back?

  The two default in Thunderbird address books are staff and collected books. Neither of these can be deleted, so I have to guess that you turned off the directory pane in the window of the sort address book and simply cannot see them.

  Open the address book window.
  In the menu bar select pane display-in page-directory

  If you do not have a menu bar display in address book address book window, press the alt key to make it appear.

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• Can't see the other person, but they can see me. All of the solutions posted did not help.

  I don't see the other person when I Skype, but they can see me. The only thing I see in my screen is their profile picture and myself. How can I overcome this? I use windows 8.1 and a computer dell laptop.

  Have they turned on their webcam?

• Re: Can I use the other Satellite U400 series recovery disk

  I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
  later I got to know that Windows Xp is not Geninue one. :|

  I can still see one of the Partition 'D:' with folder HDDRecovery inside.

  So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

  In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

  Please one of you let me know if you have valuable contributions on this.

  suggestions are welcome!

  Thanks in advance.
  wassim :)

  Post edited by: Mikael

  Hello

  I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

  Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

  By the way; You can order the CD from recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Can not hear the other party

  Had a weird start this morning problem. If I dial a number, even on speaker, the Cliq says it connects, but I never hear ringing or anyone pick it up. It's complete volumes and the speaker.

  I don't have a landline to see if it sounds or not, but I called one of my own numbers that sounds twice and going straight to voicemail, so I know that something is definitely wrong. I think I can hear static and the other party, but it is so low, that it is difficult to say. It's my only phone, so it's kind of a critical issue!

  Troubleshooting tips, I can try?

  I recently started using Shush! I really hope that is not the cause, because it is an essential application for me.

  Thanks in advance!

  OK, a reboot fixed it. I just had it redial a number well. EEK! Gremlins!

  Anyone know why I might have had the problem?

  Thank you

• Laptop is dead, how is it, I can still type the other letters?

  original title: im sry! :/ so the keyboard of the laptop is dead? How can I solve this problem?

  im SRY! :/ so the keyboard of the laptop is dead? How can I solve this problem?

  But if its dead, how is that I still can type the other letters?
  Thank you

  Each key on the keyboard has its share in the circuit without dependence on the other keys.  Just because someone broke a window in your home does not mean the rest are too broken. ;-0

  Get the keyboard repaired/replaced.m last time I did it for one person (replaced a laptop keyboard) it took 20 minutes to actually do it-most of the deletion of a lot of small screws and a conservative to avoid losing.  (Not counting the delivery the day 2 of the replacement keyboard.)

  What brand / model of the laptop?

• BlackBerry Smartphones can not hear the other end to the phone

  Hello

  I have a Bold 9900. Lately, I had a problem where I am unable to hear the ringing of the. The phone vibrates and I see an incoming call. When I answer the call, I can not hear the person at the other end of the line, or the other person can hear me. If I try someone sounds, I can't hear their phone ring, but I get the message that we are related, but may not have any conversation. When I do a full power off and restart its new normal.

  How can I get rid of this problem?

  Hello docvish,

  Welcome to the community,

  As the PC or laptop requires the restart of our smartphone require also restarts to remove slow, whenever you feel any unusual just give a battery pull reboot I have; e while the unit is on the battery wait a min. then reinsert it wait until it restarts. You can also give a soft reboot by pressing alt + Shift R (aA ^) + DELETE.

  Also avoid any applications running in the background, press on and hold Menu button for a few seconds, it will appear a screen showing running applications or that are still open., remember always to get out of the applications not only to return the key. Try if solves your problem, or alternatively you can visit any Center of Blackberry service to the issue.

  Good luck

  Click 'Like' If you want to thank someone.
  If problem resolves mark message (s) as a 'Solution', so that others can use.

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• VM on NW even can't see the other

  Hello

  We currently have a NW 4 PC.  One is a windows 2003 domain controller that also acts as a DHCP server.

  2 PC are under windows 2003 with VMware server, run a virtual machine containing a particular set of software.   Virtual machine use bridged NW and have an assigned IP address of the domain controller is registered on the domain.  The firewall has been disabled on all machines (the NW is private with no Internet connection).

  the address of the host PC1 i.e. = 10.0.0.30 (Windows XP)

  PC1 VM address = 10.0.0.40 (Windows 2003 server)

  PC2 = 10.0.0.50 host address (Windows 2003 server)

  Address of VM PC2 = 10.0.0.60 (Windows 2003 server)

  The domain controller, host, all machines in the NW (physics and VM) machines can be crazy, and have a response time, which makes sense, given that they are all connected to the same switch.

  However, the virtual machine on PC1 can not ping the VM on PC2 and vice versa.  Also, using windows Explorer NW that it is not possible to browse the files shared on of VM1 VM2.

  Is there a framework and limits that I missed in what concerns the multihost and VM from the NW?

  Any help/suggestions would be greatly appreciated.  Thank you!

  Apart from the need to give the Windows OS cloned a new identity (SID, etc.) check files .vmx of guests of the duplicate MAC addresses.

  You can also use "ipconfig/all" in the prompt.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009