Can no longer watch HBO on Media center

Similar Questions

• Can I connect two computers with media center

  I have two laptops running windows 7 and an xbox 360. I tried to connect the two to the 360 to watch the videos stored on the two but unfortunately I found, I can connect only one at a time, I'm now trying to see if I can connect the two laptops with media center and access to both of my xbox using the an already established connection. Can anyone help?

  one at a time and connect a second pc, you must remove the
  WMC Extender and remove the pc to the Xbox interface association.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• How can I change zip code for media center

  How can I change zip code for media center

  Microsoft abandoned Internet TV from 9/20. It is simply is no longer available
  through Media Center. There is nothing you can do to get this working.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How can I change my region 1 to region 2 code so that I can read the DVD in Windows Media Center?

  Original title: How can I change region 1 to region 2.

  How can I change my region 1 to region 2 code so I can play the dvd on windows media Center, I live in the United Kingdom, so I only need region 2. My DVD drive is set to region 1 and I can't change with the locations using windows... need help.

  Hi DerekBoyne,

  You can follow this link and check if it helps.

  Change the country or region setting

  Hope the helps of information.

  Please post back and we do know.

• After turning on my computer I can't start live TV in media center.

  After turning on my computer I can't start live TV in media center.
  It's just there for a few seconds then it gives me a disk error and tells me to restart either the media center or Windows. No help! The only way to get the work TV power is on the backup and Restore Center, and use system restore to return to a previous restore point. The restore point doesn't have to be anything in particular. It may be a system on-demand restore point, before or after turning on the computer. It just makes no sense what so ever.
  My system is a Dell XPS 410 with Vista servie pack 2. I had this problem, since the computer is new, nearly two years ago. Dell support is running out of ideas.

  What are the details of the error which mentions the disc error?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  The manufacturer of the hard drive will have free diagnostic software carefully to check the status of your hard drive.

  The importance only I can get to the system restore solution is the fact that a reboot is involved, if you need to restart just the error disappears too?

  You ran Vista memory diagnostic program to check your RAM?

  Memory diagnostic tool
  http://www.vista4beginners.com/Windows-Memory-Diagnostics-tool

  Can you produce the fault in a clean boot environment?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Are there drivers updated for your Video, cards etc.

  Same question about a possible Bios Update?  Have you tried the Bios to default security is running?

• can't watch tv in media center

  I installed a hauppauge tv tuner card in my computer and can't watch the TV in media center works great in win - tv. I have windows xp sp3

  Hello Marktvcomp

  Read this article regarding directly to the Live TV and Windows XP.
  http://support.Microsoft.com/kb/831062

• When you try to watch Netflix on Media Center, I am prompted to open a session. After you connect to im returned to the screen even ask my name of user and password.

  Movie from Netflix in Media Center

  I have windows vista media center home premium 64-bit version. I was able to watch movies through the center of media until recently. It automatically pulls up to my account, etc. in queue, but when I click on a movie to play it takes me to a login screen. I try to re-login, but it goes just to the same screen and will not play. I tried uninstalling and reinstalling, but to no avail... same problem. I even uninstalled and reinstalled silver light, but it doesn't work anymore. If anyone has had this problem and have they been able to solve it? I can watch them via Explorer very well, but I want to be able to use media center. Help, please!

  Hello

  Follow the steps from the link: limitations of Netflix on Windows Media Center for Windows Vista and known issues: http://support.microsoft.com/kb/972496

• Netflix no longer works in Windows Media Center

  Hello!

  Recently (a week ago) my Netflix stopped working through Windows Media Center.  When I try to start the Netflix app in WMC, I just get the message 'there is a problem with the application.  Try again later. »

  I reinstalled Netflix in WMC, update of Silverlight, and yet, it does not solve the problem.  However, on some other user accounts on my computer it works fine again.  I don't know what to do.

  Help?

  I started having exactly the same problem a couple of days. The only thing that I did is to install Visual Studio 2010 and Silverlight 4. Since Netflix is a Silverlight application, I'm guessing this has something to do with it. Upgrade Silverlight this week?

  Now I'll uninstall Netflix in Windows Media Center and Silverlight 4, and then reinstall Netflix in Windows Media Center. If this solves the problem, I'll report back.

  Update : I have uninstalled both in the order above. Then I ran the Media Center and clicked on Netflix. It prompted me to reinstall the Netflix player, that I let him. As soon as it was over, I have connected and managed to go my instant queue (it wouldn't let me do it before).

  Then, I tried to look at something and was motivated I need Silverlight. I let it install, knowing that Silverlight 4 is now current. However, he installed Silverlight 3.0.50106.0 . Now he can play very well, however.

  Update #2: I closed Windows Media Center and went to http://www.silverlight.net. Here, I chose "Windows Runtime" in the box "Install Silverlight". This updated my system for Silverlight 4.0.50401.0 . I started Windows Media Center, choose something in my instant queue and began to watch.

  So, my conclusion is that maybe it was a problem with Silverlight all along. Try to uninstall Silverlight on your system and put it back in place, starting from silverlight.net, or let the Netflix player to do it for you.

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• Can't get surround sound in Media Center

  I have a computer set up in my living room which is mainly used for watching TV in Windows Media Center on Windows x 64 8. I've noticed for a while that it seemed that sound surround did not work and I was only get stereo sound of the by the front speakers. I run sound via HDMI to my computer in my surround receiver. The output is a motherboard Intel DH77EB using graphics Intel HD 4000.

  When I go into the Windows taskbar and open the playback devices, I configured the audio HDMI 5.1 surround and the sound is output to all speakers. Before, when I would try to run the speaker via Media Center Setup, it would skip the screen where you can play a sound test and go directly to the screen resolution of the problems, as if I chose that I could not hear sound from all speakers. After crossing the speaker setup of the Windows again last night, I could finally access the test page for the configuration of your speakers in Media Center. This time, the small circle 'busy' just spun for a while, and then he asked if I heard the sound of all speakers. He never played any sound. I thought he would return to the previous settings, but when I tried to play TV, he played with no audio and then pops up an error on the codecs are not properly installed.

  The only way I could get Media Center to start playing live and recorded TV is again to return the Windows sound properties and reconfigure my HDMI out be only stereo. I have temporarily lost my digital optical audio cables, but I will try those next. I hope that this will work because it will rely on different audio drivers for my computer (Realtek). I didn't have to run an extra audio cable when HDMI should work for all.

  The additional troubleshooting steps I took were completely uninstall and reinstall all the graphics and audio drivers with more later from the Intel Web site. I would try a refresh of Windows installation because I think that it worked when my computer is first set up (before some problems with my SSD). The only problem with that is that I have many records of CableCard that I would lose to join because of copy protection.

  So there is a work around for this problem, which is still not great, but will fix the problem to some extent (not require to keep switching the mode stereo surround for different applications). If you have your default playback device (mine is a Nvidia video card using the HDMI output) output configured for 5.1 surround sound it is a way that you can get Media Center working properly. If you start Windows Media Center by double clicking on a video recorded (record TV) in the recorded TV file default value it will launch Windows Media Center for the video and start playing without the two second loop audio and immanent freeze and screen "video playback error". Then, you can navigate to Live TV and it will continue to function properly. This seems to be the only medium that you can leave your speakers configured to 5.1 surround output and still use Media Center.

• I can get 10 in my Hp Media Center m8020n PC windows have Vista

  I don't know what to do about 10 Windows for my HP Media Center m8020n. I've had this for about 8 years and he loves and does not wish to continue with it. Can I put Windows 10 here and update all software there need or do I have to buy a new PC

  Hello

  First of all I wouldn't do this on any machine that has more than 5 years. Secondly, please note: no free upgrade from Vista to Windows 10 you must buy Windows 10 license of Windows or 7/8 to get a free update of Windows 10. Money and time to devote to this would be painful.

  But if you want to try, please read the following article:

  http://www.intowindows.com/download-Windows-10-Upgrade-Advisor/

  Kind regards.

• Can not capture TV signal in Media Center

  Hello

  IM from Australia,

  We recently had a new antenna installed in our building and they designed the antenna to a different and blocked transmission of the single tower due to us being between the two rounds and he in interference.

  The new tower is the Sydney - Kings Cross Tower (East) and it is on a different frequency to the other Tower range.

  e.g. channel 7 Sydney broadcasts to 182.25 of Artarmon MHz or 695,25 MHz of Kings Cross.

  I can't get the Media Center to find the channels in the upper frequency band, even though both my TV and Mediaportal running on the same PC, using the same tuners can receive the signal when I specify the correct Tower (and it scans the bandwidth).

  is there a way to make Windows 7 Media Center to analyze these frequencies?

  Dave

  Hi Dave,.

  I suggest to access the link below and follow the information provided by Sean Zhu Thursday, November 12, 2009 06:49and check if it helps you analyze the frequency in Windows Media center.

  http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/8842ee12-1a95-4487-910D-39c6533f2d90

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can you play Blu Ray with Media Center?

  I'm reading Blu Ray discs with media center, but it will give me only the error message that they are not supported.  How can I me media center to use powerDVD or another program to read?

  Thank you very much

  PowerDVD will not integrate with WMC (assuming that you have a BD - Rom drive installed).  You may have more luck with WinDVD 9 which integrates with Media Center.

• Can not play music in Windows Media Center or Windows Media Player

  Original title: Media Center

  I can play is more music in the Media Center or the drive. I can download and burn music, but I can't play anything. I can use I Tunes or Rhapsody to read what I have saved. Any ideas?

  Hi I80Cruiser,

  1. When did you start to question?

  2. what type of files you are trying to read?

  3. what exactly happens when you try to listen to music in the media center or the reader?

  4. you receive an error message or codes?

  You can read the following article and try to rebuild the library which may help to solve the problem:

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  Also check out the links:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Listen to music in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/listen-to-music-in-Windows-Media-Center

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hi, how can I get rid of Windows Media Center-uninstall it.

  I have Windows 7, some how I got it and can't uninstall it. Please help I want to restore the system and the appears.

  1 type turn windows features on and off in search of the start menu.
  2. open the multimedia functions and uncheck the box that media center.
  3. press Ok and you will be prompted to restart.