Sound after Vista-> downgrade XP on Satellite M100 problem

Similar Questions

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• No sound after vista pack update help

  Please help me I have no sound after Windows update

  Here's how to solve your problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

• Flat cable on Satellite M100 problem

  I bought my Satellite M100 in the Canada but I live in Croatia.
  My LCD flat cable is wrong if I need to replace it. Croatia is not official Toshiba service, so I called that close and asked them for a flat cable...
  The problem is that they do not know what is the difference between Canadians and Europeans of flat cable. Is it the same? If I order it, they will not return my money if the cable does not fit.

  Help, please.
  Best regards

  I'm no expert, but I think that Canadian M100 is the same as European A100.
  I do not know what service you have contacted, but I can recommend you contact http://www.mojservis.hr/ in Zagreb.
  It's a Toshiba authorized service provider and I hope they can help you.

  Good luck.

• Satellite L30-113 - no sound after the downgrade from Vista to XP

  Hello to everyone.
  I recently bought a new laptop Toshiba Satellite L30-113
  with vista preintalled.

  As many users around the vista of the world seemed very slow for me so I decided to go back to Windows XP Pro.
  The problem is that I can't hear any sound in my laptop.
  In fact I found some drivers for Realtek controller High definition audio
  but they have nothing did.

  I give the floor to toshiba in Greece and they told me that this laptop is designed only for windows vista!
  Can this be true?
  Help, please

  Hello

  In my eyes, you have misunderstood something. Of course, that the laptop can handle Windows XP and it should work correctly, but as you say the device was shipped with Vista and so the guys at Toshiba support don't provide any support for WinXP on this laptop.

  As far as I know page driver Toshiba also provide drivers for win XP. Therefore, visit European driver of Toshiba page and choose the good laptop-> PSL33 Sat L30-113

  You will find a driver 5.10.0.5273 version XP. This should work!

  Have a nice day ;)

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• No sound after the downgrade from VIsta to XP on Presario C712NR, Please help

  After downgrading from Vista to XP SP3, my C712NR lost her completely.  I can't find the driver for the conexant HD Audio SmartAMC HD2 map.  Much appreciated if you can help.

  Hello

  MS-UAA for SP2 (required with a reboot before the Audio driver and Modem) here

  MS-UAA for SP3 (required with a reboot before the Audio driver and Modem) here

  Conexant High-Definition Audio here

  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to communicate,
  Install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when it complains.
  Reset.

• No sound after installing drivers XP on Satellite A200-1Fj

  Hello! I have a problem!
  My laptop: A200-1FJ.

  I reinstalled vista for xp (sounds vista worked).
  I installed the driver. I downloaded from sites of europen of toshiba.

  After this operation I have no sound in my laptop.
  Even in the Device Manager, sound card did not appear.

  Can you help me!
  Thank you!

  You need to update Windows XP.
  Install Microsoft patches from MS website to get the sound on XP
  Patch 1: KB835221
  Patch 2: KB88811

  In addition, you can download the latest Realtek audio driver from the Realtek page

  Good bye

• R3000 no sound after Vista installed

  Hello

  After installing Vista, I have no sound, I think the problem is with basic Systemm devices, enter the hardware ID, it gives the name of the drivers, what is the best place to get them, thanks in advance.

  David

  Hello

  Its now sorted, but when restart, what a message came

  Disseminate UP error

  No codec ADI driver is installed

• No sound after installing Windows 7 on Satellite Pro U200

  Hello

  I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

  Available for XP Pro.

  Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

  Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

  Anyone got any ideas?

  Thank you

  James

  Hello

  Go to Device Manager and check what sound chip you have exactly:

  Use this statement:
  [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Then you should be able to find a good pilot.
  I also recommend remove/delete the sound card in Device Manager.
  Just select the audio remove card and press on, and then restart the laptop

  PS: Are you sure that the sound is not muted? Please check this too!

• Qosmio F30-147 - no sound after Vista upgrade

  I recently upgraded my Qosmio F30-147 of Windows XP MCE to Vista Business. I downloaded and installed almost all drivers available on the download page of Toshiba (including the update of the BIOS). Everything works fine but the sound. The SigmaTel High Definition Audio CODEC is the only "peripheral" listed in Device Manager. I have installed and uninstalled the SigmaTel driver available (version: 6.10.5462.0) several times without success. You have any ideas?

  Very strange! You have installed all the stuff with command described in the document instructions facilities facilities?

• No sound after vista updated itself

  I have two computers acer laptops that connect to the internet by dial-up, everything works very well until last month, and now they both can not get a dial tone.  Modems are software based and the company that provided the driver (Agere) no longer exists.  Any suggestions besides becoming an external modem?

  Hi modemproblems,.

  Thank you for using answers Forum.

  There are a few things you can try.

  I suggest you roll back the device to the modem driver through the Device Manager.
  You can reach the Device Manager by clicking on 'Hardware and Sound' from the Control Panel, then click on 'Device Manager '.

  Alternatively, you can try System Restore to restore your computer to a time when modems worked.
  Here's an article on it:

  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx

  Please let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Dv4-1413tx - no sound after downgrade to xp vista frm

  Hello...

  I recently bought a HP dv4-1413tx with vista home premium pre-installed on it. I tried it downgrade to Windows XP SP2. Managed to install XP on it but feels a hell of a time with drivers... Especially the audio. There is absolutely no sound. Not even the beeps.

  I tried to install UAA audio bus driver first and then the driver of HDTV LSI etc. but still no sound. I spent several hours on this subject...

  Peut - some kind soul please direct me on how to go about this case?

  I remember that I was in a similar situation some two years back in an attempt to re - install Windows XP on another laptop from my friend. We install everything except the audio. Finally, the technician at the shop could install for us. Now I'm away from the place... So can not go and find out that the man how it install it. It was also a HP laptop only...

  I would like to add that the mute button stays red and does not respond when you press.

  There is nothing about Audio in Device Manager... Maybe that's the problem.

  These are the hardware ID:

  ===========
  PCI devices
  ===========
  PCI\VEN_10DE & DEV_06EC & SUBSYS_30F7103C & REV_A1\4 & 23FE4F77 & 0 & 0008: NVIDIA GeForce G 105M
  PCI\VEN_10EC & DEV_8168 & SUBSYS_30F7103C & REV_02\4 & 22AB4E2B & 0 & 00E3: Realtek RTL8168C (P) / 8111C (P) PCI-E Gigabit Ethernet NIC
  PCI\VEN_8086 & DEV_2448 & SUBSYS_00000000 & REV_93\3 & B1BFB68 & 0 & F0: Intel(r) 82801 PCI Bridge - 2448
  PCI\VEN_8086 & DEV_2919 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & F8: Intel(r) ICH9M LPC Interface Controller - 2919
  PCI VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA: Intel(r) ICH9M-E/M SATA AHCI Controller
  PCI\VEN_8086 & DEV_2930 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FB: Intel ICH9 Family SMBus Controller - 2930
  PCI VEN_8086 & DEV_2934 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E8: Intel ICH9 Family USB Universal Host Controller - 2934
  PCI VEN_8086 & DEV_2935 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E9: Intel ICH9 Family USB Universal Host Controller - 2935
  PCI\VEN_8086 & DEV_2936 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EA: Intel ICH9 Family USB Universal Host Controller - 2936
  PCI VEN_8086 & DEV_2937 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D0: Intel ICH9 Family USB Universal Host Controller - 2937
  PCI VEN_8086 & DEV_2938 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D1: Intel ICH9 Family USB Universal Host Controller - 2938
  PCI\VEN_8086 & DEV_293A & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EF: Intel ICH9 Family USB2 Enhanced Host Controller - 293-a
  PCI\VEN_8086 & DEV_293C & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D7: Intel ICH9 Family USB2 Enhanced Host Controller - 293C
  PCI\VEN_8086 & DEV_293E & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D8: Bus Driver Microsoft UAA for High Definition Audio
  PCI\VEN_8086 & DEV_2940 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E0: Intel ICH9 Family PCI Express Root Port 1 - 2940
  PCI\VEN_8086 & DEV_2944 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E2: Intel ICH9 Family PCI Express Root Port 3 - 2944
  PCI\VEN_8086 & DEV_2946 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E3: Intel ICH9 Family PCI Express Root Port 4 - 2946
  PCI\VEN_8086 & DEV_2948 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E4: Intel ICH9 Family PCI Express Root Port 5 - 2948
  PCI\VEN_8086 & DEV_294A & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E5: Intel ICH9 Family PCI Express Root Port 6-294 has
  PCI\VEN_8086 & DEV_2A40 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 00: Mobile Intel (r) 4 Series Chipset processor to DRAM - 2A 40 controller
  PCI\VEN_8086 & DEV_2A41 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 08: Mobile Intel (r) 4 Series Chipset PCI Express Root Port - 2 has 41
  PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00\4 & 2A17DF6C & 0 & 00E2: Intel (r) Wireless WiFi Link 5100
  22 correspondent or the devices found.
   
  ===========
  USB devices
  ===========
  USB\ROOT_HUB\4 & 12221D3B & 0: USB root hub
  USB\ROOT_HUB\4 & 2044AD61 & 0: USB root hub
  USB\ROOT_HUB\4 & 29C7184A & 0: USB root hub
  USB\ROOT_HUB\4 & 32817C7F & 0: USB root hub
  USB\ROOT_HUB\4 & 37E9A870 & 0: USB root hub
  USB\ROOT_HUB20\4 & 2BF3D41C & 0: USB root hub
  USB\ROOT_HUB20\4 & 87AE6AB & 0: USB root hub
  USB\VID_03F0 & PID_171D\5 & 24058FCE & 0 & 1: integrated Module with Bluetooth 2.0 wireless technology HP
  USB\VID_0781 & PID_5150\20043513330A7FE20BF8: USB mass storage device
  USB\VID_174F & PID_1107\STK00001: USB Composite device
  USB\VID_174F & PID_1107 & MI_00\6 & 3AB7CE14 & 0 & 0000: USB video device
  USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_MINI&REV_0.1\20043513330A7FE20BF8&0: SanDisk Cruzer Mini USB Device
  12 person or the devices found.
   
  =============
  Input devices
  =============
  No matching device found.
   
  ============
  ACPI devices
  ============
  ACPI\ACPI0003\2 & DABA3FF & 0: Microsoft AC adapt
  ACPI\AUI0216\4 & B310638 & 0: Synaptics PS/2 Port Compatible TouchPad
  ACPI\ENE0100\3 & B1BFB68 & 0
  ACPI\FIXEDBUTTON\2 & DABA3FF & 0: ACPI fixed function key
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\HPQ0004\3 & B1BFB68 & 0: A sensor of HP Mobile Data Protection
  ACPI\INT0800\4 & B310638 & 0: Intel(r) 82802 Firmware Hub Device
  ACPI\PNP0000\4 & B310638 & 0: Controller Programmable interrupt
  ACPI\PNP0100\4 & B310638 & 0: System clock
  ACPI\PNP0103\4 & B310638 & 0: High precision event Timer
  ACPI\PNP0200\4 & B310638 & 0: Direct memory access controller
  ACPI\PNP0303\4 & B310638 & 0: Standard 101/102 key or Microsoft Natural PS/2 keyboard with HP QLB
  ACPI\PNP0A08\2 & DABA3FF & 0: PCI Bus
  ACPI\PNP0B00\4 & B310638 & 0: System CMOS/real time
  ACPI\PNP0C02\4 & B310638 & 0: Mother resources
  ACPI\PNP0C04\4 & B310638 & 0: Numeric data processor
  ACPI\PNP0C09\1: Integrated controller compatible ACPI Microsoft
  ACPI\PNP0C0A\1: Microsoft ACPI battery compatible control method
  ACPI\PNP0C0B\0: ACPI fan
  ACPI\PNP0C0C\2 & DABA3FF & 0: ACPI power button
  ACPI\PNP0C0D\2 & DABA3FF & 0: ACPI lid
  ACPI\PNP0C0E\2 & DABA3FF & 0: Sleep button ACPI
  ACPI\PNP0C14\0: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C14\NVIF: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C32\1: Direct Application Launch button
  ACPI\PNP0C32\2: Direct Application Launch button
  ACPI\PNP0C32\3: Direct Application Launch button
  ACPI\PNP0C32\4: Direct Application Launch button
  ACPI\PNP0C32\5: Direct Application Launch button
  ACPI\PNP0C32\6: Direct Application Launch button
  ACPI\PNP0C32\7: Direct Application Launch button
  ACPI\PNP0C32\8: Direct Application Launch button
  ACPI\THERMALZONE\THRM: ACPI thermal Zone
  ACPI_HAL\PNP0C08\0: System compatible ACPI Microsoft
  ROOT\ACPI_HAL\0000: ACPI Multiprocessor PC
  36 correspondent or the devices found.
   
  ============
  HDA Audio
  ============
  No matching device found.
   
  ============
  RAID devices
  ============
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA
  Name: Intel(r) ICH9M-E/M SATA AHCI Controller
  Hardware ID:
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C
  PCI\VEN_8086 & DEV_2929 & CC_010601
  PCI\VEN_8086 & DEV_2929 & CC_0106
  Compatible IDS:
  PCI\VEN_8086 & DEV_2929 & REV_03
  PCI\VEN_8086 & DEV_2929
  PCI\VEN_8086 & CC_010601
  PCI\VEN_8086 & CC_0106
  PCI\VEN_8086
  PCI\CC_010601
  PCI\CC_0106
  1 correspondents or the devices found.

  Can someone please help...?

  If someone who knows tell me how and in which order and what drivers to install, from the XP just installed and ready on the system, I would be very grateful... Then I will be re - install all drivers in the correct order after I freshly installed windows xp again!

  Thank you...

  Message edited by pjr on 20/07/2009 09:02

  @pjr.

  Drivers for Windows XP:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA for SP2 (required with a reboot before the graphics and Audio, Modem driver) here

  MS-UAA for SP3 (required with a reboot before the graphics and Audio, Modem driver) here

  NVIDIA GeForce G 105M

  Modded Drivers NVIDIA drivers 185.85 worm.

  How to install under XP:
  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3. install & restart.

   

  Intel Wireless 5100 here

  Bluetooth Wireless here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41698, vista, work reported in here XP driver

  2 sp41693, pilot, work reported in XP here view

  3 SP39671, driver, jobs reported in XP here or here view

  When you install a sound driver with checking the success is your sound work.

  If there is no sound after reboot check this thread. There is information how to fix this problem.

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Alps Touchpad here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  ENE CIR (infrared receiver) here

  JMB38X card reader Host Controller Driver here

  If you had for 7 unknown devices with IDs of devices such as below (buttons drivers), here

  ACPI\PNP0C32\1
  ACPI\PNP0C32\2
  ACPI\PNP0C32\3
  \4 and so on

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• No sound after upgrade to Vista on Satellite M55-S139

  I just put a laptop Toshiba Satellite M55-S139. I added a 1 GB RAM and everything seems to work, even the Aero Interface.

  However, I have no sound. Vista indicates that the device is working properly think it works, but I don't hear anything from the speakers or the headphones. I uninstall the program from Toshiba Virtual Sound that Vista has complained that it was not compatible.

  The sound is a "RealTek AC97 Audio". Thanks in advance for any help.

  Maybe the audio driver that is installed on your laptop is not compatible with Vista.
  Search this site realtek more audio drivers:
  http://www.Realtek.com.tw/downloads/

  and try the diver SoundMAX Integrated Digital Audio.

  Maybe it helps...