Can not activate the Vista administrator account

Similar Questions

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me?

  I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me? @

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• want to im going in circles here needed to recharge CS3 but says that I can not activate the license

  Want to im going in cirlces here needed to recharge my creative suite 3, but he says that I can not activate my license.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  or

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  - and more help in http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  and

  CS3 IS activation server still works https://forums.adobe.com/thread/2165284

• 1 TB 3.5 "DT01ACA100 Rev: AA10 AAA/607. I can not activate the mode of SATA3.

  My GA 970 a - DS3 motherboard. My Win7 64 bit OS. I can't activate the mode SATA3 hard drive. Please help me.

  The performance of the HARD disk and the interface will be recognized automatically. Sometimes the BIOS contains an additional parameter to toggle between the different SATA interface options. It would be interesting to check it out...

  The city 3.5 "HDD supports the Serial ATA 3. 0 / ATA 8 interface and in the case of the motherboards HARD disk controller support the SATA3, HARD drive should be able to provide the mentioned interface speed

  Here you will find details of the HARD drive:
  http://Toshiba.SEMICON-storage.com/e...t01acaxxx.html

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• Can not activate the discovery network in Vista

  I just reinstalled Vista on a laptop and went to connect to a wireless network that previously worked before the re installation of Vista.  Network discovery was off so I turned on and then you click on confirm and return to the window and it is still off.  So, I can't turn it on.  Any ideas please?

  Hello

  1. What is the brand and model of the computer?

  2. What is the accurate and complete error you get when you try to activate the service?

  3. What is the security software installed on the computer?

   

  Method 1.

  Step.I

  Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Step.II

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Step.III

  Try setting your computer unbootable inClean State and check to see if the same problem happens. Setting of the clean boot state system helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Step.IV

  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2.

  You can update the network drivers and check.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Refer.

  Enable or disable network discovery: http://windows.microsoft.com/en-SG/windows-vista/Enable-or-disable-network-discovery

  I hope this helps.

• Help and Support does not work does not correctly when you are connected to the Vista administrator account

  Click the startup of Vista and in the Search box , type WINVER , and press the Enter key on your keyboard.  Please report back with the correctVersion number and build shown . Carey Frisch

  Version 6.0 (Build 6002: Service Pack 2)

  I have the same problem exactly as described Flashimator don't except this: the problem occurs only when I am logged into the administrator account.  Support seems to work normally in my user account.

  I should add that my HP laptop has an OEM program which seems to be an overlay on the Windows Help.  It is also not available in the administrator account.

  (HP Pavilion dv9260us, Vista Ultimate x 64, Intel Core 2 Duo T7200 @ 2.00 GHz, 2 GB RAM)

  Thank you.

  PS It is often more important to have help available when logged in as an administrator as I do only when I have to (as in the resolution of problems).

  Hi Dyn0saur,

  Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  Regarding your question, see the article following some possible troubleshooting for your question:

  http://support.Microsoft.com/kb/917607

  In addition, an article on content help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-the-latest-Help-content

  Thanks for visiting the site of the community of Microsoft Windows.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Thunderbird, re - install can not find the e-mail accounts in the previous drive C:\

  QUESTION; Where should I go from here?

  STORY:
  My C:\ drive (!.) TB) began to balk when after that I got a little more than 800 GB stored on it. My tech told me that the case of the machine would hold two internal HDs. We bought an extra 1 TB HD and it installed Windows essential, all the drivers and my regular backup utility so that we can make an immediate reflection of the drive on an external hard drive.

  Two internal parts carry Windows 7 64 bit, and by changing the Boot Setup, I can boot from either - no errors or red flags.

  I downloaded TB 31.0, installed on the new disc. then copied it to App Data and Application Data including all files in TB from the old HD (2 Windows user accounts) to discrete files on an external drive. From there on, I copied them into the appropriate folders for the two users on the new HD. Thunderbird will otherwise not them, even if I used each solution and tip, I learned with TB on a dozen years. I worked on number of days following, checked several similar articles on the forum and do not see a solution. (And my tech has never wanted to learn something about Tbird; nor has he had to in the past.)

  I just uninstalled Thunderbird 31.0 and deleted content under TB in App Data records (2) and (2) the Application data on the new drive C:\. I first of all confirmed that all previous data is available on the old HD and that the copy on the external drive is complete and accurate - and without any locking Windows security. Local settings on both old-reader/users folders were locked and could never access, but some TB related files were there in the past.

  What should I do? (1) install an older version of Thunderbird and hope I can marry the old files in? or (2) what can suggest you?

  Thanks in advance. EDJ.

  I solved the problem with a drawer 3 rd (not the best) solution. I put all the profiles of previous TB (with all mail folders) side; then configure new TB accounts access to Gmail and Yahoo mail.
  Once I drained all accumulated mail servers, I'll go through the old records (under the old profiles) and carefully, one at a time, move the folders that I need to keep the local folders account. That method appeared in an another related posts; practical, easy and he killed me.

• Can not activate the WLan on Satellite L350D

  First of all, sorry for my bad English

  I'm having problems with the WIFI, I fail to enable it to connect to a wireless router and be able to connect to the internet

  Computers icon is green: if I choose: to built a connection or net and then I choose to connect to a router or wireless access point, I hit 'next' and then he said: "hardware detection and configuration of the net ' and then he said 'Windows don't detect any material NET Wireless' and he said ' to create a net wireless and flash configuration keeps in a usb unit»

  In the blue icon of a computer and like a ball behind: there is a screen called CONFIGFREE.

  If I press the 'radar' it says "this device net wireless is disabled." Enable the device"and if I touch" doctor conectivity, in ' "rolling / wan wireles ' State of the switch is enabled and the firewall is disabled.»

  But then, in the design, although it has two arrows. Blue disconnects and if I change the profile, it is said that the wire is not available and the realtek fast ethernet is available.

  Hello

  Your description is a bit confusing.
  So here are my Tips how to connect the laptop for WiFi using the Vista operating system.

  First check if your WiFi is turned on. You must use the key FN + F8 to go tot eh card WLan and then turn on the WLan switch on the side of the laptop.

  According to your WiFi (Atheros or Intel) card I advise to use a WLan configuration as Atheros Client Utility or Intel ProSet Utility tool.

  You can use these tools to configure WLan. I use one of these tools and I can connect and configure the WiFi network very easily.

  If you want to use the Vista WLan own configuration options, can access the network locations and right click on the WiFi connection.
  Choose then rebuilt Waln connection or something like that.
  Then choose your WLan which has been configured on the router WLan and put the right encryption settings and you should be able to connect to you wirelessly.

  Good bye

• Can not activate the 3D on my new Qosmio X 870

  I'll be back all my Qosmio X 870 3 days and I tried to activate the 3D, but I couldn't. All the updates are here, no app has been deleted, but it seems that the computer can't detect the built in infrared transmitter.

  Any solution?

  Hello

  This Qosmio X 830 - xxx you have exactly?
  How have you tried to use the 3D?

  If the Qosmio X 870 has not been equipped with a compatible 3D display you will need to use the external 3D compatible TV or monitor to watch 3D

• Can not activate the upgrade activation key

  just purchase the updgrade for windows 7.  He said that the system had to be wiped, then the installation run because I've been upgraded to xp.  Booted from the disc of windows 7, installed fine.  Now when trying to activate gets refused saying fresh install not allowed.  What gives?  Can I convert the license?

  See this link for a way that should work:

  http://community.winsupersite.com/blogs/Paul/archive/2009/10/23/clean-install-Windows-7-with-upgrade-media-the-answer.aspx

• Can not activate the Win7 x 64 Win XP x 32 update

  I couldn't move from Win XP x 32 to Win7 x 64 using the upgrade process.  So I did a clean instead install.

  How can I enter the old XP information in the validation process?

  You can not, you will need to phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can not activate the window 8 pro on new PC

  Brought a copy of download windows student pro under a year ago and put it on the first test bench, I built and use. Just built another platform and it won't let me activate the new rig. Copies of students say that it can be used 5 times. It is the 2nd platform on what I put.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Can not activate the sound

  I have a HP Pavilion dv7 1232nr. Everything has been working great until two days when I realized that the mute button at the top of the laptop is RED (silent) and I can't seem to "reactivate" it or change the volume using the key above the keyboard.

  When I go into Control Panel, Manager of devices, it is said that everything works correctly. My headphones will work, but other that that, I can not all sound from the internal speakers. I see green bars move when I music, etc, but I am unable to hear it without a helmet.

  I spoke with a colleague and she said her daughter has had the same problem and they had to download something, but she can not remember what it was.

  Anyone able to help? Thank you in advance.

  The sp41479 is this driver. :-)