Can not been seen data connection where to create Entity Data Model.

Similar Questions

• Updated blackBerry Smartphones to 5.0.0.900 and can not synchronize Organizer data now

  I have a Curve 8520 I updated my device / desktop softwear at 5.0.0.900 and can not synchronize Organizer data any longer.

  When I go to the Organizer, I can not select the checkboxes for the address book, calendar, tasks, Memo.

  When I press on the settings of a window opens which is called BlackBerry data synchronization and he said to determine the name of configuration root for the main system...

  On top of that then pops up another window called Intellisync

  and he said: X unknown error reported. My only choice is OK.

  I tried using the former Office Director to synchronize my organizing data which worked fine and synced my microsoft outlook email, calendar and contacts from my phone very well. Now, it will not synchronize the two. It also gives me an unknown error.

  Please advice, I have to get my data from Organizer synchronized again.

  Thank you

  J9

  Hi and welcome to the Forums!

  Have you installed on your PC, the new device OS package? And, if so, did you also remove any prior OS package PC?

  Otherwise, a clean startover might be in order:

  I suggest the following steps (reboot insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, under Vista/Win7, use the option "Run As Administrator" for everything.

  In addition, it was also reported that when your user profile on windows (type "echo %UserProfile%" in command prompt) contains spaces, then the installer will not work. To resolve this issue, log off from your Windows account and sign in using the local administrator account (or any other name of account without spaces) and install office (for all users).

  (1) remove the package to update your device OS of your PC (Add/Remove Programs)

  (2) properly uninstall the RIM DTM software:

  • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
  • Some noted that there are several registry keys to remove talk in this KB... don't forget to get your all associated with RIM registry database
  • Others have reported the use of a registry cleaning tool to be also useful
  • Still others have reported the use of your original PIM (Outlook, NOTES, etc.) Installation CD, run the "repair" to be helpful in some situations process

  (3) get a new RIM DTM software download:

  • https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
  • Choose the version which is more recent and (if any) compatible with your PIM (if you are synchronizing via USB):
  • KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

  (4) to download a new copy of your package to your carrier OS device (on your PC):

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  (5) install DTM on your PC

  Installation of 6) (also on your PC), device OS package

  (7) start the configuration Organizer:

  • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager

  If all goes well, who's going to make things again.

  Good luck and let us know!

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.

  I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.  In Device Manager, Ethernet controller has an error indicator, and when I click on properties says driver not installed.  I have asked for help to install through windows update, but found nothing.  On the site of Samsung nothing for this driver, only wireless.

  Hi Allan,

  Welcome to the Microsoft community. According to the description, you are unable to get a wired connection.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Hello, I have supported adobe reader dc, but I can not yet seen a document on the web, what can I do?

  Hello, I have supported adobe reader dc, but I can not yet seen a document on the web, what can I do?

  Hola de adobe reader pero aun no puedo ver a documento en PDF internet alguien can help me

  Hi melaniea32902198,

  To display IN the web browser to ensure that the PDF viewer plugin is enabled on the web browser Display PDF in browser Adobe Acrobat DC, DC of Acrobat Reader.

  Google Chrome & Firefox have their own PDF Viewer, please allow them to view the PDF in web browser.

  Kind regards
  Nicos

• Can not see all the stored procedures in the Entity Data Model Wizard

  I hope it is a simple oversight on my part I try to use the new beta version of odp.net with entity framework support. I can open the Entity Data Model Wizard, give him my information database, and I can choose various tables to use successfully. But in the list where I select the tables, views and stored procedures, the wizard does not see my stored procs or my point of view.
  
  Does anyone know why he would see the tables but not views or stored procedures? My procs can be found under "packages" If that makes a difference. I tried to create a fictional stored procedure at the level above the title of 'procedures', but it is unclear whether.
  
  Is it possible for me to debug this from here? The log files, I could watch that would help me?
  
  Thank you
  Jim

  I belive your Oracle database 10 g such as 9iR2 predates.
  ODP/EF Beta does not list the stored procedures or functions when connect you to a database Oracle 10 g before.

  Readme.txt:
  4. the procedures are not compatible with the DB 9.2.
  Thus, there is no stored procedure listed by the EDM Wizard for 9.2 DBs.

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• PC can not read audio data from any media player

  computer laptop windows 7 my mother began to just expose some strange problems. She is unable to play any of his music on his pc using WMP12. the same files will also not play using iTunes, but I can cancel the iTunes issue for now because the problems are related. I was able to get the files to play on my PC in WMP12 across the network, so the files themselves are not at fault. work the system sounds in Windows, but when I say WMP to play a wav file, it errors out as well. I tried to reinstall the audio drivers, and run the troubleshooter of wmp and the resolution of the problems of audio playback, but nothing wrong was found. SFC has found no problem either. before resorting to more drastic measures (restore, reinstall, etc.). I well I ask here to see if I could get assistance.

  Seems rather strange, that my first thought is to check the volume, in windows 7, you can set the volume for different applications, like Chrome. I don't see anything else I'm afraid. You hear the music when played from YouTube? If so, it may be a problem in the settings for music apps, in general. Another idea would be to try to install K-Lite, to ensure that there are no problems with codecs.

  http://codecguide.com/download_kl.htm
  Except that I can not think what you could make, but restore to a time where you could play music.

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• Vista opens in safe mode but can not repair or data rescue

  After switching on my Sony Vaio and see the logo Vaio pc screen displays the option of safe mode. by choosing the option of safe mode not repair defects or not save the data. Screen turns white and then thin displays at an equal distance vertical green lines. After a while the display briefly shows recangles red and turns off again. After a few minutes, a blue screen with white text will appear informing that a problem has occurred and a shutd = downwards to protect windows. Even if I press f10 launch the same aoours, suggestions how to solve this problem?

  Thank you.

  Hello

  These elements suggest corruption graphics driver or graphics hardware fault. Material most likely that she does in Mode safe.

  Because it's a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• SQL IN keyword does not not in the data model. ???

  I created a data model that extract codes window a table by using the IN keyword.
  
  < name of dataTemplate = "Enonce1" defaultPackage = "" than one dataSourceRef 'Flex' = > "
  Properties of <>
  < property name = "include_parameters" value = "true" / >
  < property name = "include_null_Element" value = "true" / >
  < property name = "include_rowsettag" value = "false" / >
  < property name = "scalable_mode" value = "off" / >
  < property name = "db_fetch_size" value = "300" / >
  < / properties >
  < Parameters >
  < name of the parameter = Valeurdefaut 'branchcode"="000"/ >
  < / Parameter >
  < lexicals / >
  < dataQuery >
  < name sqlStatement = than one dataSourceRef "Q2" = "" >
  <! [CDATA]
  SELECT branch_code from sttm_branch@dbuser1 where branch_code IN(:branchcode)
  []] >
  < / sqlStatement >
  < / dataQuery >
  < dataStructure >
  < name of the group = "G_BRANCHES" source = "Q2" groupFilter = "" >
  < element name = "BranchCode" value = "branch_code" / >
  < / Group >
  < / dataStructure >
  < / dataTemplate >
  
  I created a LOV named branches that hold the entire industry codes and have created a branchcode parameter and set its type from the menu and have assigned branches LOV. I've also selected the check box "Multiple Sélection" and "Can select all" for
  ' Can SΘlectionner everything ' I select 'pass all values '.
  
  Now I am faced with two questions.
  (1) when I select "All" from the LOV and try to view the report there is no counter code be passed as a parameter. When I select "All" in LOV the XML that is generated, that's how.
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < Enonce1 >
  < > 000 BRANCHCODE < / BRANCHCODE >
  < / STATEMENT1 >
  As you can see he is just passing the value defined as defaultValue in the data model.
  
  (2) when I select several entries of LOV they demonstrate them as parameter in XML, but no data is returned. Resulted in the XML is like that.
  <? XML version = "1.0" encoding = "UTF-8"? >
  < Enonce1 >
  < BRANCHCODE '000 ', '001','002 ' > < / BRANCHCODE > (these are the parameter values)
  < / STATEMENT1 >

  Hello

  you need a lexical parameter in your query:

  SELECT DEPTNO, DNAME, LOC FROM DEPT * & deptwhereclause *.

  This glossary can be defined in one before the report according to your setting of multiple selection

  If p_deptno is not null then
  deptwhereclause: = ' WHERE DEPTNO IN ('| p_deptno |') ' ;
  end if;

  This complete example is here: http://www.oracle.com/global/de/community/bip/tipps/dynamische_queries/index.html

  It's in German, but the screenshots and code may help anyway.

  Concerning
  Rainer

• Palm TX v 6.2.2 installshield can not find the Internet connection

  -At the end of the installation process installshield find no Internet connection, even if the connection is running.

  -After several unsuccessful retryes, I gave a new attempt and installation seems to complete but says Windows Desktop is not responding and needs to close.

  -J' I reopen Desktop and it seems to work very well, but the pop-up window to transfer programs to the handheld device lists no program at all.

  Help, please:

  Can I trust the v 6.2.2 update?

  What Museum transferred to the handheld?

  Most recent is not necessarily equivalent to the best.  6.2.2 was a construction needed by a society of Japan (Access) to make a version of Palm Desktop which works with Vista and newer versions of Windows.  These new versions of Windows has broken several functions in Palm Desktop 4.x, so 6.2.2 was born.  It is not a version update of Palm Desktop.

  The fact that you're having trouble installing it is eloquent.  6.2.2 is known to lose data when a computer is closed and that the program is active, doesn't have a color code for the categories and breaks up the synchronization with DataViz products.  It uses a different database structure to 4.x, so all the backups of RAW files will not work.

  I have not installed 6.2.2 on a XP box, but I guess that it will work.  I would do so if the opportunity?   N °

  As a volunteer here, I have no real power to change the existing Support files.  I'm not "discredit" anything, just to offer a suggestion.  Palm Desktop 4.2 is designed for Windows XP, and works very well with this system.

  HTH,

  WyreNut

• Satellite M100 - can not repair the 1394 connection & Wlan driver needed

  I installed XP Pro on my Satellite M100, due to being Home Basic, vista terrible.
  I installed all the drivers listed on the site of toshiba for the XP system.

  When I try to repair the 1394 connection I get message saying to error failed to query TCP/IP.

  Can someone help me with this problem?

  Also the wireless for this system driver does not appear to be installed.

  Does anyone know where I could get it from?

  Thank you.

  Hello

  May I ask if you have installed the LAN driver?
  And if you have installed the network driver; have you tried to update the driver LAN?

  To be honest, I do not know why this error, but I wonder why repair you the 1394 connection.

  However, in my opinion the LAN driver should be updated and you should also check if the TCP/IP protocol is set to automatic.

  You can google a little how to change TCP/IP settings.

  By the way; The WLAN driver can be downloaded from the Toshiba driver page!

• Can not find drivers to connect to the iPhone Bluetooth

  Bluetooth

  I installed windows 7 sp1 on a dell inspiron 1520. Can't find drivers to twin with devices such as my iPhone.

  Can someone please tell me a solution?

  Keith

  Depending on what you're trying to do with the iPhone, it cannot be a driver problem.  By Apple design, the connectivity of the iPhone to a computer (Apple or Windows) via bluetooth is extremely limited.  The iPhone does not currently support the synchronization or file or photo transfer to a computer via bluetooth.  It only supports data cell sharing internet connection with the pc to the phone and it is only in certain countries with certain companies and a possible additional fee to the carrier.  Sync and photo transfer is only via iCloud, USB cable, or with iOS 5 and later via wifi if the pc and the telephone are on the same router.