SQL IN keyword does not not in the data model. ???

Similar Questions

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Does not display the data of Apple users in PDF format

  Hello

  We have created a form using Acrobat 9.  The form can be completed and saved, so people can send to us.

  Whenever I receive a form someone who uses an Apple, the characters they typed, do not appear in the boxes unless you click on the area where the data should be.  It does not print the data either.

  For example, let's say I have the part of the form where people with type a paragraph.  When they e-mail form more, it is empty... unless I click on the box that the data is, they, it turns out.  This only happens with Apple users.

  You have any ideas on why this is and how to fix?

  Thank you!

  Dave

  In Acrobat 9, you would select: forms > manage form data > export data

  export, and:

  Forms > manage form data > import data

• Help with a 3rd party on my Web site widget (does not display the dates of concerts)

  Hello world!

  I use a Bandsintown widget to display the dates of the show on my site, but lately it does not show the text, the widget shows but no text, you can click which means that the widget works but it does not show the text. I contacted Bandsintown support and they told me to change the CSS, but honestly I don't know what they are talking about.

  Here's a link to my site, if someone wants to help

  http://www.xolazulband.com

  Hey Urbano... I finally got the Bandsintown html code to work properly in Adobe Muse. I created a new white master with no background, images, etc. and applied to a new, blank page. Then I pasted the original HTML... with no changes and no additional graphics on the page. It worked... I could see all the information of the tour. Then, one by one, I added additional elements to the master page... as image background, menu, logo, etc. I kept it check each time I added an item until my page has been done. It worked. You can see it here: shellyphelps.com/tour. Why does it work? I have no idea, but I'm guessing it has something to do with the fact that "by default, the widget uses the styles of the page, in that it is included". I'm not a coder either... just determined to understand! LOL I hope it works for you.

  Thank you

  Shelly

• PDF does not print the data entered in the form fillable

  I created an editable pdf that I want to use to fill out a form, save in their own car, change it again, then print it and send it in.

  I followed the instructions for the readers extended, activate additional features - and can see the data entered after registration on behalf of the new and once again. But I can not print the data. The form prints as a form empty with graphics and all - I see the data on the screen, but the form prints without the data. Help!  I use Acrobat X, Mac 10.1.14

  I print on this basis, Acrobat Reader and preview and print all blank with data on the screen.

  It could be that the fields are set on "Visible but does not print. Check the "form field:" drop-down list under the general tab of the dialog box properties field to see what it is defined. If it's not her, can you post a sample PDF file somewhere?

• Creating a s:list via AS3 does not display the data?

  If I do something like this in the list appears on the screen but does not show the items in the dataprovider.  If I throw the list via MXML tags it appears fine.  Any suggestions?  And Yes, I know the data is there because it works when you use a MXML of the list version.

  var thirdList:List = new List();
  thirdList.dataProvider = someDataProvider;
  thirdList.useVirtualLayout = true;
  third.addElement (thirdList);

  TIA

  You started the thread saying that a list was not appear when created with AS3. But then you post saying that it does not work with the States.

  Who is this?  If you could post a complete example non-working people can better help diagnose.

  Thank you

  C

• Tiara dac combined with the NI PCIe-6259 does not send the data

  Hello

  I have a card OR PCIe-6259 & DIAdem 11.2.0 (version 2010) on a windows 7 PC.

  Inputs outputs & analog analog + digital are configured in MAX 9.8.0f0. (Global virtual channels)

  When I run a dac, entered analog works perfectly.

  Outputs analog and digital does not work. Only one of the four analog outputs give the value that has been send.

  In the past, I had the same problems with this version of DIAdem in combination with a third party USB card, but this has been resolved by the new firmware & software drivers.

  Someone who has had similar problems?

  Thank you.

  After trying many things, I finally found the solution.

  In the output ==> pilot ==> options pilot "weighting the digital bus" must be verified.

• Where labview does not save the data file

  Hello

  I wonder when I choose the path PDF running vi and save a file of measures in a vi. Later when I do a .app or .exe file, where he saves the file data or results. I looked at the folder of the application where I have the .app or .exe file and it does not record there.

  Thank you

  Yogesh

  Never mind. It save .app package file. I can see and read by opening the .app package content.

  Thanks for your help

  Yogesh

• Windows Gadgets - calendar does not display the date

  original title: windows gadgets

  I use windows vista service pack 2 but calendar in the sidebar shows no date because I deleted a software in windows safe mode.

  I use windows vista service pack 2 but calendar in the sidebar shows no date because I deleted a software in windows safe mode.

  Take a look at this answer in this forum by Imran M

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/calendar-gadget-sometimes-does-not-display-date/8b4ad5c1-A249-E011-8dfc-68b599b31bf5

• Windows 8 xcopy /d - does not choose the date of the day, just copy everything

  Hello

  I am running Windows 8 and use the command xcopy to save a number of directories. When I used the /D switch in the past (with no date), it would only copy the files that are newer than the target date of the mod file.

  In Windows 8, it does not. If I use / d with no specific date, it copies just everything. The only way to make it work is to specify the current date, while it works.

  I'm doing something wrong, or is this a bug in xcopy to win 8?

  Hi Chris,

  Your question is better suited for the TechNet. Please post your question in the forum TechNet Script. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home?Forum=iTCG

  Thank you.

• PowerCLI does not calculate the Date year statement

  Hello

  I have a custom to attribute Date (JJ/MM/AAAA) in vCenter and I attempt to bring together WHAT VM before that date but does not my statement appear to account for the year.  So if I put a date in the future for example 15/01/2012 the script lists than before the current date is incorrect and everything goes back beyond the date of the day but still in 2011 is not displayed is correct.  Any ideas would be greatly appreciated.

  $currentdate = get-Date
  $currentdate = $currentdate. ToShortDateString()

  Get - VM | Get-Annotation - CustomAttribute "Expires"? {$_. Value - the "$currentdate"} ' "

  Version:

  vCenter - 4.1.0.12319

  PowerCLI - 4.1.1.2816

  See you soon!

  Have you thought about converting the date you get the attribute.  Try this

  $currentdate = get-Date

  Get - VM | Get-Annotation - CustomAttribute "Expires"? {(Get-Date $_.)} The value) - $currentdate}

• Sent form does not display the data

  Hi all

  I'm working on the form which has 3 subforms that are hidden to exclude from the layout. It also has a workflow. The subform will only show when a radio button is selected. Show and hidden is works well but when the form is submitted, the data of the subform that has been selected visible does not appear when it routed to the next person. I don't know what Miss me in the shape or the workflow, can someone please advise/help me on this.

  Thanks in advance,

  DAO Han

  If you have the code for the atrtibute hidden or invisible forms in the event to change the control, try to add to your form ready event:

  If (this.) RawValue)

  {

  this.execEvent ("change");

  }

  Fill the evetn you want to trigger if this isn't the change event you use.

• PHOTOSMART PLUS B209a-m: PHOTOSMART PLUS B209a-m does not print the data entered.

  Printer was working fine, but recently had a few power outages in 48 hours.  After the second blackout, we noticed that if we tried to copy and print something, what we would have would be a picture or a diagram of a post, for example I tried to print a tax document of our mortgage company.  The pre-printed outline was shaped did print, but the data that have been added by the mortgage company (name, address, etc.) do not have.

  If someone can guide me in the right direction to rectify this situation I would really appreciate it.

  Hi @Whitey16,

  Welcome to the HP Support forum.

  I understand that your printer HP Photosmart Plus all-in-one worked very well until you've had a few power outages. Since the outages, the printer has been printing a ' photo or diagram of a post "where to send print jobs to the printer on your computer Mac OS X 10.11 El Capitan. I would like to help with that.

  The first thing we want to do is to test the functionality of the printer without a computer. Try to print a report to ensure that the functions of the printer printer ok on its own.

  

  If the report of the State of the printer print, then we need to look at the software & drivers used by the computer.

  Then I would reset the printing on Mac system. Here is a document of support from Apple that you can use if you need help with that - reset the printing on your Mac system.

  Once the system has been reset you will need to add the printer back in. When you add the printer you want to be sure to choose the printer drivers and not the driver "Airprint" in the menu drop-down 'Use' on the window "Add" of the printer. Here is an another Apple su [document report that can help you with that - Add or remove a printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!