Can not blurring properly

Similar Questions

• I try to open the version cc 2015 Photoshop in my office, but it can not open properly, before update until 2015, 2014 version is fine.

  I try to open the version cc 2015 Photoshop in my office, but it can not open properly, before update until 2015, 2014 version is fine.

  Hi to wing,

  Please provide more information such as: -.

  > What operating system is your computer works (Windows 10, MAC 10.10.4 etc.)

  > Your computer specifications (quantity of RAM & graphic card)

  > What error message do you get when you open Photoshop

  > Post a Screenshot

  Click on the camera icon in the menu editor to download the image stored on the current position of the cursor

  

  Concerning

  Assani

• I have a Logitech EyeToy USB Camera and that you can not install properly.

  .

  Vista Windows

  No driver

  Hello

  1 you get an error message during the installation of the EyeToy USB camera? If so,.

  2. What is the exact error message you get?

  Try to install drivers Logitech EyeToy USB Camera from the site of the factory and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  I hope this helps.

• SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

  Hi all:

  I have this problem on and outside.

  This time, it's ok and next time can be bad that the USB device is unable to detect Win 7 64 bit. It's OK to Win Xp all the time.

  I have referred to as the previous posts for this problem and remove the VID_0781 by REG_EDIT, also try to uninstall the device from the hardware in the computer and re - install the device. I also did the replacement of usbstor.inf in c:\windows\inf to another subfolder.

  from c:\windows\.

  The result is intermittent it's Ok this time and not okay at other times. It's really wasting a lot of time to try this or that, and the result is intermittent.

  Can anyone or Sandisk people leave a good and permanent solution to this problem?

  Thank you and best regards,

  tangsuan

  Hi all:

  I want to update this solution for this problem of Sandisk support.

  This solution may be different from one case to another, but if you have installed Samsung KIES in PC, then most likely it is the solution.

  If you kill the KiesTrayAgent.exe, the Sandisk can be detected smoothly whenever you plug it into my laptop.

  Thanks and respect of the best.

• Windows Vista can not close properly

  Hello

  Every time when I shut down my computer, I click the close button and let alone. However, when I go back to the computer after a certain time, it is always on. He said shutting down and there is no way I can turn off except in order to cut the current that is not recommended. Can someone help me please?

  Thank you.

  Wen Xin

  Hello

   
   
  1. Since when are you facing this problem?
  2. you remember any changes made to the computer before the show?
   
  Method 1:
  
  Step 1:
   
  I suggest you to search for the problem in safe mode and see if it works. See the following link for more help.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  If the problem does not persist in safe mode, and then try to perform the clean boot on the computer and check if it helps.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
   
  http://support.Microsoft.com/kb/929135
    
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  Method 2:
   
  I also suggest you refer to the below mentioned link and check if it can help solve the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
   
  I hope this helps.
   

• update failed KB2572078, can not run properly.

  I have automatic updates and all seem to go thanks to accept to KB2572078.  I get a message "update failed" when my PC is running this update and I have tried everything I can to understand this.  I see that others have this problem so I am in the dark.  Can someone please help me understand what is happening?  The update is important according to my IE so I hope someone can help.  I ran microsoft fix it, and he said that everything is fine with my updates.  I had the same update failed with IE 7.  At work, we have technical support available at any time, but here I am without a lifeline... maybe you have the answer?  I appreciate your time if you have any suggestions for my problem/s.

  Gracias!

  http://support.Microsoft.com/kb/2572078

  Try to repair the affected version of .NET Framework.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

  Try to install the update after a reboot...

  If no joy, see above section for further assistance.

• I can not install properly on my Windows Vista programs because something is wrong with my Installer. What should I do?

  The message (when installing itunes) States:

  There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.
  Now, everything was going well until I tried to install the latest version of itunes 2 days ago. Is there anything I should do? I'm just a bit confused (great)! I tried uninstalling and reinstalling itunes and others, and it doesn't seem to work.
  Any help is appreciated!

  Hello

  Unregister and re-register the Windows Installer service and check if the problem persists. I suggest that you follow the steps in this link and check if the problem persists.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-install-iTunes-error-there-is-a-problem/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

• I have an old Adobe Flash and need to update, but I can not connect properly.  I just reset my password and can enter the general Adobe OK website, but when I click on install it won't take my user name and password and let me continue.  What it

  What do I need to get some help here?  I just try and get nowhere?  I need to be able to connect so I can update my Adobe flash player.  I have reset my password and can connect to the Internet site fine - but it won't take my user ID and the password for me to get an update... y at - it someone who cares enough to help? !!  I don't need general thoughts as someone who can guide me through the process to achieve this!

  Hello

  What site are you using to update Adobe Flash player? No Adobe website never ask any id and password to update the flash player.

  If you are using MAC machine and is the password during the installation of the update that you speak, so please follow what userid & password I need to install Flash Player?

  Varun-

• After installing Linux my laptop can not initialize properly

  OK so I installed Linux ubunto and I dual boot with my standard version of Win, when me and my friend tried to simply go back to Windows, we have restored to the original with the backup disc only problem is that now the program (GRUB) that loads when you choose your operating system is still on the computer.

  It gives me an error message 22 every time... I was told that I have to reset the master boot record or something like that, but I don't know how if someone could please help me?

  Which would be greatly appreciated!

  Your MBR (Master Boot Record) contains the GRUB loader. You must recover its original content.

  For win95/98/me, you are using 'fdisk /mbr' with a boot disk.
  With win2000/xp you start the recovery by using the installation CD console and type fixmbr

  Albert

• I can not install properly update KB2416472. I get the OX66A error code.

  The fix - it tool says that everything is fixed after I run, but I have yet to install the update.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Satellite A200 recovery does not work properly

  Hello.

  After making a few changes in the partition settings (when installing Ubuntu) Vista does not load (after the loading screen appears a black screen and nothing happens). I changed the Vista partition only by expanding its size.
  I try to reinstall Vista and set parameters of origin with product recovery cd, but with the same result - after screen to communicate on loading the filesystem appears black screen and no action is performed. I changed the boot on a dvd/cd device.

  I guess that's a problem with the parameters of partition, but don't know how to solve. Now, I have an original score with Vista (extended) and the other in the rough. How should I change it to properly run product recovery?
  I'll be grateful for any help.

  @ Salim Al-Ghaithi

  This error message is not known to me, but it seems that the application that has been installed on the recovery CD can not work properly.

  It's not easy to say why it happens maybe dysfunctions of restore CD or you partition the HARD disk is not going.
  I recommend you begin with formatting the entire HARD drive. You must also remove all partitions on HARD drive and then try to use the recovery CD and start the installation.

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• I think Firefox is getting worse, because there are many Web sites that does not work properly with it, while my other browser Google Chrome can.

  There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.

  Thank you, and I take back what I said about Firefox getting worse.

• Firefox 4.0 is not working properly (Alienware laptop running Windows 7) - how can I go back to 3.6

  I just downloaded and installed Firefox 4.o and it does not work properly. I am running Windows 7 SP1 on a 64-bit Alienware Laptop i7 cpu 1.2 Ghz, 8 GB of RAM.

  Black boxes cover the text when the mouse passes over it; Some Web pages appear completely black; other flash between black and normal. I can't see tabs when I hover over them (they appear in black). The scroll bar on the left does not. It is very difficult for this type because every time I hit a strike the textblock turns black. It is also very difficult to move to the bottom of the screen.

  The problems seem to be exactly the same as when I downloaded the mine field.

  Can I restore to 3.6?

  Just download it here:
  http://www.Mozilla.com/en-us/Firefox/all-older.html