SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

Similar Questions

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• USB port can not detect my new camera

  My usb port won't detect a device I have ever connect to the port, when I plug the new device, windows cannot install the driver... always failed... help me please...

  Hello

  1. What is the brand and model of the USB device you are trying to connect?

  2. What is the brand and model of the computer?

  I suggest that you try the procedure described in the article mentioned below.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-CA/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-CA/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Can not stop "ongoing maintenance" win 8 64 bit

  I am running 8 64 windows and Center said action "maintenance is underway" and I can't stop at the center of action.

  There is no suspicious process running in Task Manager.
  Also, I tried solutions (manual stop and quick start disabling) has proposed to:
  http://www.SysNative.com/forums/Windows-8-%7C-Windows-RT/4487-Windows-8-automatic-maintenance-stop-maintenance-not-working.html
  and
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/maintenance-in-progress-Windows-8/79f86ead-DBAF-468B-B546-ee9e4cc35924
  without success. Otherwise, how can it be turned off?

  go to "open the Action Center" & click on "stop maintenance" in the menu "maintenance". If you want to change the settings manually then clik on "change settings of maintenance.

• Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  You can do this for Vista (and), but not for Windows XP.

  You want to explore other ways to improve your performance? If so, you are in the right forum. :-)

• Can no longer access my Scandisk Cruzer Blade USB 4GByte

  My Dell PC (XP SP3 operating system) still recognizes my Scandisk Cruzer Blade USB 4GByte, but now you invite "the disk in drive G is not formatted. Want to format it now?

  I suspect that the drive is full, as I planned to remove a few files for some time - but not got around him. The last time it worked, I copied a file from software on the drive for a colleague. He took the blade, copied the file and returned it to me.

  Is it possible that I can "secure format" the drive without erasing the data on it or another method of recovery/restoration of the blade.

  Tried to win 7 & XP - no joy. Colleague (System Administrator) used a recovery software but can't find anything.

  Technical support of Scandisk which provided a link to the software recovery LC company went through. Recovery software demo download, but once again failed to find all the files. Talked to their technical support which provided another link for some more advanced software. Once again no file is found. Talked with them and now confirmed her drive is clean and empty - somehow?

  Their Filerecover software checks the data in hexadecimal block - all zeros.

• Strange! SanDisk Cruzer blade 16 GB

  Hello.

  I buy a sandisk cruzer blade 16 GB a week ago. He had worked flawlessly for 2 days, but recently, I copied files of windows 7 64 bit and connect this player to a computer with windows xp. It shows usb not detected and has malfunctioned and blah blah.

  I thought that there is a problem in this system, but I was shocked to see that now it is is even not detected by my pc either.

  After so many tests, I tried to connect it with my keyboard usb port and it has been detected, but that the port is not 2.0 because windows ask me to connect it to a hi-speed 2.0 port.   I thought that the problem has been resolved and I format the USB and then plug it back to my pc. but same problem again and it shows device attached has malfunctioned. but when I connect with the usb port on the keyboard it works very well. However, the usb keyboard that I tied this USB is connected with my usb port on the computer.

  Similarly, I connect this usb with some old marks of Dell systems model Gx optiplex 260 and it has been detected it too much and at the same time not detected by any other pc that stood out...

  Why is this usb detected now only by the usb ports on my keyboard and not by my pc as it was earlier detected by my pc.

  I tried several solution but nothing works even with kaspersky scanner last definition.

  Is there a solution to this problem. I want to connect this usb to my pc 2.0 ports.

  I have intel DH55TC Board with Intel I3 processor of first generation.

  First of all thank you.

  In fact, the usb is defective and I had replaced.

  and Ed if it is the question of power, then how can it be connected to the usb port on my keyboard that eventually connected to the same usb port of the usb to my pc and alternated readers like Kingston and Sony are working well in this port.

  Any ways thanks to you guys for the suggestion.

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• WMCW Benelux Tablet case with usb Keybord is not detected

  WMCW Benelux Tablet case with usb Keybord is not detected

  on my Acer Iconia B1 - A71 / Android 4.1 Jelly Bean
  USB 2.0 driver installed

  can someone help me please.

  Welcome to.

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• USB keys do not work in my VISTA PC, but working in the XP computer.

  My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

  But I have several problems with VISTA.

  One of them is the following:-

  USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

  An external hard drive works perfectly on the same USB port. If the port is fine.

  Hello PG_eu,

  First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

  Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

  You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
  You can also go into the event viewer and see if you have errors on your hardware devices.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• SanDisk cruzer flash drive glide does not work on my rt of surface, both are new

  SanDisk cruzer flash drive glide does not work on my rt of surface, both are new. Could not format it rises

  Hi Victor,

  Welcome to the Microsoft Community and thanks for posting the question.
   
  
  According to the description, the Flash Player does not work.
   
  This can happen because incorrect settings in the computer.
  Click on the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
   
  Answer to us if you are having problems with the Flash Player or any Windows problem, and we would be happy to help you.
   
  Good day!
   
   
  Hope this information helps.

• Your bootable USB key could not be created

  "Your bootable USB key could not be created.

  Hey guys,.

  I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

  Please read: create an ISO image for the Boot Camp Windows installation media.

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .