I can not install properly update KB2416472. I get the OX66A error code.

Similar Questions

• Can not install windows update to KB2656362 get the error code 880070490. Run fix, but it has not fixed the problem.

  Can not fix with fixit.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  If the system update readiness tool solves the problem, you will need repair Windows.

  Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.

• Why I can't install an update? I get the error msg 57

  I have windows vista and when I try to install my updates, there is one that can not be installed I get an error message 000000057.

  Hi VianneyTorres,

  You are trying to install updates?

  You can follow this link & check if the problem persists:

  You cannot install some programs or updates

  
  Reference: the problems with installing updates

  Hope the helps of information.

• is my internal webcam not install driver updated product. Get the message "not found room.

  I have an acer aspire 6920 and I can't get the driver to work on the internal webcam. the webcam shows in Device Manager, but not in the update hardware

  Hello

  Download your drivers from Acer.

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• When I try to use Windows Update, I get an error message when it tries to check the updates. I get the following error code [error number: 0 x 80070424]

  I get the following message

  Also get the red shield with X saying if off automatic updates.

  Tried fixing it by going to control panel, but it does not allow me to change the settings

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hi, I found the answer! Right click; Start, then on run, copy and paste this command, click OK. Problem solved!

  Bill

  % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

• Windows Update download but does not install for XP Pro SP3 - receives the 800704dd error Code

  Reinstalled Windows Update agent, wups2.dll recorded, tried to use Microsoft Fixez_ the (claimed he fixed), but none of this seems to help install updates for over a year now.  Here is a copy of the last part of my WindowsUpdate.log.  Any help would be most appreciated.

  -----------
  2012-05-10 13:01:10:357 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-05-10 13:01:10:357 4804 12e8 COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
  2012-05-10 13:01:10:373 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:373 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:389 1108 c4c Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
  2012-05-10 13:01:10:404 1108 c4c Misc Microsoft signed: Yes
  2012-05-10 13:01:10:498 3084 ACC Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:10:514 3084 ACC Misc = process: C:\WINDOWS\system32\wuauclt.exe
  2012-05-10 13:01:10:514 3084 ACC Misc = Module: C:\WINDOWS\system32\wuaueng.dll
  2012-05-10 13:01:10:498 3084 ACC DtaStor update service properties: registered with AU service is {7971F918-A847-4430-9279-4A52D1EFE18D}
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - added service, URL = http://update.microsoft.com/microsoftupdate/
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - COMAPI: IUpdateServiceManager::RegisterServiceWithAU -.
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-05-10 13:01:10:576 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:607 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:10:607 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
  2012-05-10 13:01:10:607 4804 12e8 Misc = Module: C:\WINDOWS\system32\muweb.dll
  2012-05-10 13:01:10:607 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:10:732 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:795 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:10:810 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:857 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:10:889 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:951 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:10:951 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:154 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:170 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:264 4804 12e8 Setup * configuration: check if it is necessary to update *.
  2012-05-10 13:01:11:264 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
  2012-05-10 13:01:11:295 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuweb.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:295 4804 12e8 Setup * IsUpdateRequired = No
  2012-05-10 13:01:11:295 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:11:310 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
  2012-05-10 13:01:11:310 4804 12e8 Misc = Module: C:\WINDOWS\system32\wuweb.dll
  2012-05-10 13:01:11:295 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:11:310 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:342 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:11:342 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:373 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:11:373 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:435 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:11:451 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:451 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:467 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:529 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:529 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:545 4804 12e8 Setup * configuration: check if it is necessary to update *.
  2012-05-10 13:01:11:545 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
  2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\cdm.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuapi.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuapi.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 configuration NOT required for C:\WINDOWS\system32\wuauclt.exe update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:826 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:826 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:889 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:889 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wucltui.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:935 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wucltui.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:935 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:12:014 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups2.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:12:014 4804 12e8 Setup * IsUpdateRequired = No
  2012-05-10 13:01:12:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:12:232 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:56:217 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:56:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:02:39:218 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0

  Problem has been resolved.  The permissions on the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\SensLogn had to be reset.  This enabled the settings of this key be restored and Windows Update works now.  I suspect that this problem occurred initially because of a crash of an Acronis image training program that was causing problems.

  Thanks for your reply.

• Windows backup never completes. Can not enter backup set up and get the following error _

  Internal error. There is no error 0 X 80070424 code your specified service. I am backing up to DVD

  Hi you are tired,

  We will follow these steps that should fix the problem:

  Step 1
  I first suggest you to check if the Volume Shadow Copy service is started. He is responsible to perform the backup.
  1. open run it and type services.msc, and then press ENTER.
  2. in the services window find shadow copy Volume service in the services list.
  3. check that the status is started. If the condition column is empty,
  Right-click on the Volume Shadow Copy service and select start.
  4. If you get error trying to force the Volume Shadow Copy service started, try to change the Startup Type to automatic and restart the computer.

  Step 2
  Try to take in another DVD or any other external device and check.

  Step 3
  Perform a clean boot that starts Windows 7 by using a minimal set of drivers and startup programs and eliminate software conflicts. Then try to get back and check.
  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135
  (1) perform the clean boot (check the link to perform the clean boot).
  (2) enable half the services.
  (3) determine if the problem comes back.
  (4) enable half of the startup items.
  (5) determine if the problem comes back.
  (6) repeat the steps above until you find out which program or service is causing the issue
  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Check out this link where user had a similar problem:
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/0ab20bb4-24FC-4e24-bce9-aac4e2756be9

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/55f5fe3a-a1cb-4855-ba4d-73f32c202246

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates Windows 7 Gets the unknown error code

  Windows updates will not download, I get an error of 3 important updates whenever I try to download them, "unknown error"?

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• Windows Update fails to run and get the C800044E error code

  Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

  Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

  Please, try the following suggestions to see if the problem can be solved:

  1. click on Start, type notepad in the start search box and press ENTER.

  2 copy and paste (or type) the following command lines in the Notepad window:

  net stop wuauserv

  CD %systemroot%\SoftwareDistribution

  Ren Download.old download

  net start wuauserv

  3. on the file menu, click on record under and type Rename.bat .

  4. click on save as type and then click on all files (*. *) .

  5. save the Rename.bat file to your desktop.

  6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

  7. try to install the updates again.

  8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

  any other ideas?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Is this a sudden, new problem?

  Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Hi, I can not install an update? The error is (U44M1210)

  Hi, I can not install an update? The error is (U44M1210)

  Please see this link:

  Error U44M1I210 | Install updates

  Hope this helps you.

  Concerning

  Megha Rawat

• For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... :( I uninstalled the PSE from my old computer software. Can someone help me?

  I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... I uninstalled the PSE from my old computer software. Can someone help me?

  To locate the serial number:

  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

• Xbox Music does not update, I get the 0x8024001e error code after a certain time.

  When I got to my computer (it is a Samsung series 3), none of the applications would update. I reset the computer and all but one app update: Xbox Music. I can install any other application and update other applications, but when I try to update, it just be said pending, download (which is not actually download), or that it can not be installed, and then I get the 0x8024001e error code. Rather aggravating.

  She updates. I don't know why, but he just decided to update this morning.