can not change the folder targets to the folder my documents

Similar Questions

• Can not change the brightness of the screen - HP ENVY 17 laptop

  After the upgrade to Windows 8.1, I have the problems below:

  -I can not change the brightness of the screen on my laptop

  -When I clicked "Contact technical support" on HP support assistant program, he showed an error "HP support assistant has stopped working"... and closed the program. I downloaded a new at HP, but the same problem occurred.

  My laptop PC info

  Product name: HP ENVY 17 Notebook PC

  Product number: A9P84UA #ABA

  Please instruct me how to fix it. Thank you.

  I posted the step by step guide here: http://www.tomshardware.com/forum/id-2748304/amd-intel-enduro-laptop-brightness-fix-win.html but if you are familiar with registry just search FeatureTestControl and see if the value is using f840 or f940 and replace it with ffff then restart your computer. should work now. But if you are still having the same problem trying to follow the steps on this post. see you soon!

• all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  Hi Escapermark,

  Take a look at these articles to the knowledge base, one should set the gray on the problem:

  http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F

  http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

  http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument

• I can not change the type of standard user to the admin account.

  I had a very difficult time, adding new accounts to the system.  Now that I have, I can not change the type of standard user to the admin account.

  As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
  1 restart in SafeMode with network.
  2. log on as an administrator.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following commands and press ENTER after each:
  NET user
  (This will show you all existing accounts)
  net localgroup administrators 'xxxx '.
  (This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

• why I can not change the method of payment and my billing information?

  why I can not change the method of payment and my billing information? By clicking on the buttons right just does not work

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone (do not support the weekend)...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Icons of Windows/folder/images virgins; can not change the background in the image.

  Thus,.

  I don't know what happened, but I had somehow the virus/trojan thingy goingonearth.com... I don't even know if it has nothing to do with my problem. I know that since discover and try to remove the virus/trojan said, I experienced a few problems:
  1. my file & image icons (tiles) were literally emptied in large mode. But there is NO icon file (photo). The text/image folder is still there. The REAL folder icon shows when using small icons, but if I switch to large icons, it extends a smaller and makes VERY pixelated (sp?) (photo). In any case, I have inserted screen captures.

  2. When you delete a file, I noticed the associated picture icon is black (photo).

  3. I can't change my desktop image using the photos, I can however change the solid color black color I want OR I can use a canvas photo and set it as my desktop. The icons below the screen background images is empty as well (photo).

  I can assure you that I unchecked the "always show icons, never thumbnails" option in the Folder Options under control panel (photo).

  ANY help would be appreciated, it drives me crazy.

  Thank you
  Cuzimjustmeh

  I never found a solution to this problem. I've just upgraded from Vista to Windows 8 and everything is fixed. Clearly.

  JustMeh

• can not change the brightness in windows 7 on SL500

  Hello

  just installed windows 7 64 bit on my SL500. previously, I had vista 32-bit home.

  granted, everything works, but I can't change the brightness. its default value (which is 85% I think)

  I have the latest driver from nvidia geforce 105M display, but it does make a difference. also I downloaded power management and driver power management but always impossible to change the brightness.

  also, the sound is not loud enough.

  any ideas people?

  Thank you

  Pranav

  I fixed it!

  My SOLUTION: install the new drivers from nVidia, is now operating at 100%

  http://www.nvidia.com/object/notebook_winvista_win7_195.62_whql.html

• Can not change the mouse buttons

  I tried new mouse on my computer, and now my computer will not recognize the original mouse as a Microsoft mouse. The keyboard and the mouse still work, but I can't change the buttons of the mouse for left-handed people my family before I had no problem doing this. The original mouse is a Sony Vaio device that works wirelessly with a keyboard via a USB input device. Any ideas?

  See if that will help:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• DVD not working not not on the laptop, because I can not change the region from 1 to 4

  everyone is not how to work with the dvd region on laptops it said I have a channel on the left but just won't let me do.

  JJ

  Just a comment in passing.  You can only change the region 5 times, so when you did this last change it won't let you make another.  Be sure to choose the correct region.

• BlackBerry smartphones can not change the electronic signature with the Blackberry Internet Service on Orange

  Hello

  I'm on Orange and I am trying to remove the signature when I send the email to my gmail account.

  An earlier thread was really useful-

  R Man

  I'm going crazy trying to figure out how to change the signature on my blackberry curve 8300.  I'm with Orange Business.  On my camera, it displays the option, but cannot be changed.  On my bill online orange it does not mention - in fact it is impossible to get information from blackberry.  Could someone help me?  I keep seeing references to the 'BIS' - which I suppose means Blackberry internet service - but this does not seem to help me?  This is a website / option on the phone / or what?  DRM for any help...

  Bifocals

  Hi and welcome to the forums!

  You're BIS correct is the Blackberry Internet service.

  If you go through the icon to setup e-mail on your phone, you will actually the site of the BIS.

  If you can not change your signature through the device, you can connect to a PC Web site.

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

  The Orange UK BIS site

  https://bis.EU.BlackBerry.com/HTML?brand=orangeuk

  The BIS of the procedures via the PC site

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB03781&sliceId=SAL_Pub...

  But when I go on the site of Orange UK BIS I can't set up a new account as it says there is a already for my phone, and when I clicked on the link "forgotten password" and I sent myself a message that 'username and password do not exist.  Please use your device to access Blackberry Internet Service. "When I use Setup email on the phone, I can see the signature but not change.

  Y at - it a help for me, or am I stuck with this signature?

  Thanks in advance.

  the fastest is to call Orange UK and they will tell you how to connect to your BIS account for editing.

• Still can not change the color of legend of radio by script

  Hello

  I tried to follow the advice in other threads when developers wanted to inactivate by script radio button choices, and also put the grey of the legend. What I find is I can disable the choice, but I can't just turn the grey of the legend.

  If the exclusion group is named "MyRadioChoice" and the choices are (for example) "choice1', 'Lendemain2', '3 choice' because of the other entry choice 3 user becomes inapplicable, then wisdom is it should work:

  MyRadioChoice.Choice3.access = "readOnly";

  MyRadioChoice.Choice3.caption.font.fill.color = "192,192,192."

  The first statement works, the choice is no longer can be clicked. But the second does not work, I can just change the colour in the legend. The script does throw any errors, it's all simply does not work. Can anyone help?

  Add 'value' at the end: MyRadioChoice.Choice3.caption.font.fill.color.value =...

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!

• can not change the dns server, always comes back.

  10.10.5 Yosemite

  My ISP has provided DNS servers are terrible and I still get messages "site is not reachable. I'd like to change the DNS from Google or Open DNS servers

  In SYSTEM preferences > network > DNS tab I delete 2 default entries & entry "8.8.8.8" & "8.8.4.4" (google dns)
  In the "areas of research" box, there are 2 entrances & I can't delete them.

  I click OK & apply - when I go back to the DNS tab, it was the old DNS.

  What should do?

  

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• Can not unlock the files in Documents & Settings folder on can I 7

  Windows 7 won't let me edit the security permissions in the folder Documents & settings even with admin privileges, so I can open it with the file.  Any action that I am trying just reminds me of the change owner screen that says I don't have permission to view the access settings.  Never can get to the window to actually change the permissions.  I just did a clean reinstall of the system because of a problem.  Access permissions were no problem until I did the re-install.

  You're not locked: this file does not actually exist in Windows 7.  But backward compatibility to old programs that look for this name, they put a redirect (called a symbolic link) in place.  So, it looks like a folder, but it is not really a record at all.

  Windows XP: C:\Documents and Settings\Jerry

  Windows Vista forward: C:\Users\Jerry

  They were replaced by a smaller folder 'Users' of a single word, but apart from the name change, it's the same folder.  Again once the 'Documents and Settings' you see is not really a file, it's just a redirect of compatibility so old programs that await the long name will not crash when used on Windows Vista/7 from.

  PS. You should not even SEE this redirect normally link, it shows that if you go to Folder Options and turn on the 'display protected system files and folders' and 'display the hidden files and folders '.  That is why the link is kind of ghost and gray, because it is a hidden link junction, not a real folder.

• Can not change the configuration of the e-mail pop up account when add existing e-mail account

  As says the issue I can change the name, but not the fields email and password in the first box pop up that appears when you add an existing e-mail account. Seems to be a bug in the pop-up edition regardless of the new account is.

  have you tried to simply type in the box. the email@example,com immediately disappears as type in the box. Same for the password