can not handle the vSphere client SAN

Similar Questions

• Where can I download the VSphere client to use with VSphere Hypervisor (ESXi)

  I'm looking for the download for the VSphere Hypervisor. This client will be installed on my laptop to my virtual machines via VSphere Hypervisor Manager

  You should be able to point a browser to the ESXi host and download the client-

• Can not handle the ASA inside the interface of Site to Site VPN

  Hi all

  I was deploying new site to site between ASA 8.0 (HQ) and ASA 8.4 (branch). Everything works fine but I have a problem on the ASA-reach remote that I can't manage branch ASA with inside the interface IP address.

  My setup on remote ASA

  management-access inside

  ICMP allow any inside

  SSH 0.0.0.0 0.0.0.0 inside

  SNMP-server host inside 10.0.1.101 communitry test-snmp version 2 c

  My Test

  -ping of the AC for inside the interface of remote ASA

  • Client time-out see demand
  • When debug icmp on ASA remote then ASA show only ICMP request to HQ no response back from remote ASA

  I'm not sure whether it's a bug on ASA 8.4 or not because I can manage a remote other ASA what version 8.0 software HQ

  Thanks in advance

  Do not know what 8.4 version you use, but it is broken in the 8.4 (2), I stumbled upon the upgrade from same problem. SSH and ASDM will not connect through a VPN L2L interface inside. This worked well in 8.4 (1).

  CSCtr16184

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtr16184

  [email protected] / * /.

• NB - 200 can not handle the compatibility mode for HDD Contoller...

  Hello everyone!
  I would like to make it work on my nb 200 ubuntu 10.04 netbook edition netbook. The installation is done, grub works very well (I kept windows xp and have dualboot grub-controlled). Of course, I asked first in the ubuntu forum to solve my problems. I thought it was done, but in fact it wasn't. See the ubuntu forum for more information: http://ubuntuforums.org/showpost.php?p=9346966&postcount=1
  Switch mode Compatible HARD disk (in bios) controller works great for ubuntu, but Windows XP have problems. XP is launched (I see the Welcome screen), but then the computer restarts. I updated the Bios to version 1.9 (02/2010), but this does not solve my problem.
  In the threat of ubuntu, a help very kin (darkod) says:
  + You can try, but if changing the controller type makes a difference, I'm not sure this will help. This seems not related to ubuntu. +
  + I'm surprised change compatible controller made XP no boot. If a hard drive is sata, you, instead, compatibility mode is required to even install XP because it does not include inside SATA drivers. +
  + I guess it depends how the manufacturer put the netbook. +

  Thanks in advance for your help.

  I tested the functionality of Windows XP Home edition on my Satellite with AHCI mode and if the WXP was preinstalled with the SATA mode enabled it will not work when the mode is replaced by the compatibility option. I get the blue screen every time if I want to start Windows XP Home edition.

  I think that you do need to make the decision. If you want to use both operating systems, I think you should change the AHCI mode to compatibility and reinstall Linux and Windows XP Home edition.
  Then it works well, but you will not have full disk under Windows XP Home edition as performance when you use the SATA mode.

• Solutions of J611 HP 3051 icon disappeared and can not handle the Scanner

  I looked for a solution online. I called HP Support and they are not helpful at ALL. I uninstalled and reinstalled the whole program by using the original CD.

  The HP icon shows only a few items online.  There is no scan option manage AT ALL.  How can I enable and disable the scanner option if there is no evidence to do so.

  The OS is Windows 7.  On another computer with Vista - there is an icon together with solutions and management options to scan.

  What is the problem and why can one person apparently get a response on this forum?

  Hello

  Please try the following package:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-2/DJ3050A_J611_1315.exe

  Kind regards.

• I enjoy FSX, but can not handle the planes I downloaded - half of them appears on the screen "select the aircraft."

  I need more details or a utility to amange all my airplanes download

  Hello

  1. What is the operating system that you are using?

  2. what version of the FSX game installed on your computer?

  I suggest you to contact Microsoft Flight support for assistance on the issue:

  https://microsoftflight.com/en-us/contactus/

  You can also check out the link below:

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

• TEXT 3D - can not handle the perspective

  Hello Adobe community - I have some difficulty to transform text in 3D - several online tutorials showing me that I should be able to manipulate the prospect with cursor directly with graphic once I have check the icon 3D next to the element of text for a reason, that I am not able to do that and it only allows me to adjust the size of the graph. Any advice?

  Two ways to do it. The best, after having created your 3D layer, create a camera and then adjust the position of the camera or rotate the 3D layer using the Rotate tool (keyboard shortcut is the w key), or not to add the camera. Here's a hint. Point of view is controlled by the position of the camera, no focal length and you cannot change the default camera of the AE camera position.

  Another thing, you need to be looking at the camera view Active to do all this work. None of the other custom views will not show you to what you get when you return.

• Can not handle the CSS for InContext... ?

  Hello!

  So far, I could understand every Adobe problem by reading this forum, but this time I'm stuck.

  Yesterday, I discovered InContext and thought it was a great idea. I start to play and understand this feature.

  I added editable and checked in InContext repeatable sections, and it worked fantastic! Then I tried my stylesheets to InContext.

  First of all, after pressing the button "Manage the Classes CSS available", he told me that he did not have any CSS.

  I changed my html code

  of < style type = "text/css" media = "all" > @import "bla"; < / style >

  for < link href = "blah" rel = "stylesheet" type = "text/css" / >

  Then, I could push the button, a dialog box window appeard, the computer began to think and Dreamweaver crashed.

  I tried all to me accessible computers, he did all the same. Updated software, and I tried all the varieties of the code that I could think of.

  No idea what I did wrong? It would be just too much practice to add a bit of style sheet classes...

  Thanks for reading and thanks for helping in advance!

  Kind regards

  Nathalie

  Hi Nathalie,.

  Sorry to hear that you still have problems.

  The files you are editing are located on the local computer or a network drive? You indicated that you experience this problem on two machines in your studio, so I thought that maybe your 'local' site files are located on a network drive. If so, try to move the files to the local disk on the machine and see if you have the same problem.

  The question is certainly something specific to these machines, since you don't have the problem with your files on your friend's computer.

  Have you tried uninstalling and reinstalling Dreamweaver?

  Best regards
  Corey

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• Can not find the handle!

  Hello

  I am updating an application and it works well in 5.0.But he can not just run under althougth 5.0, its icon appears in the home screen.

  All modules does not appear to be loaded compeletely.

  DEBUG:

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-4

  Thanks in advance

  What version of BlackBerry Java SDK or BlackBerry JDE do you use? See the link below for information on compatibility.

  http://supportforums.BlackBerry.com/T5/Java-development/appropriate-version-of-the-BlackBerry-JDE-an...

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• can not download the iso images for vSphere

  Hello

  You also have this problem, that you do not see the iso images available for download for ESX 3.5, and after logging in order to obtain trial of vSphere, email is not in your Inbox?

  I can't download then all the necessary installation iso images.

  Thanks in advance for any help :/

  Hello

  Transferred to vSphere install and upgrade day & forum.

  Go to http://www.vmware.com/downloads you can then select vSphere. To do this, you will need to connect to your VMware Store account and then download the appropriate ISOs. Without the VMware Store account you can not download the images. If you select evaluation, you will need to complete administrative formalities, then wait for a response. Which can take 24 hours or more.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• Connection to the client with VSphere ESX host makes me download the old version of the VSphere client

  Welcome the OS Version: 5.1.0 - 2013

  Question: When I connect to my guests with the VSphere client it forces me to re-download the VSphere client. As you can see from the attached PDF there pretty much all installed versions. Yet, he's trying to go to vsphereclient.vmware.com to try to download again (which cannot because it is on a closed network). It is meaningless to me, as you can see I have all versions of the installed client. My boss who also has the same installed versions can connect. Actually, I installed 5.1 client so that should be enough. VSphere shows the host to 5.1.0 - 2013.

  Why is this not with my Vsphere client?

  Looks like your Client vSphere is version 5.1.0b (source: Match VMware vCenter 5.1 component Versions |) Virten.NET) and your ESXi host is version 5.1 Patch 4 (KB VMware: Products VMware correlating build numbers to update level )

  You need download the vSphere Client 5.1 update 2 version to directly connect to this host.

• Can not see the storage on BladeCenter S

  Hello

  I have a HS23 blade with an on-board ESXi 5.0 USB stick and I have problems adding storage in the vSphere Client. The BladeCenter chassis has redundant SAS RAID modules. With the help of the IBM Storage Configuration Manager tool I created a pool of storage RAID 5 with a volume on this storage pool and assigned the volume to the blade HS23.

  The previous read, I was expecting the new volume to appear in vSphere client essentially like DAS but I don't see anything. Matter who has ideas that I could have done wrong?

  Bay 6 or 5? Your document Word said earlier that the volume titled "VMstorage" is mapped to "Blade_Bay_5".

  If you are sure that you have mapped the drive correctly and do not at all see it when viewing your storage controllers in VMware, it is best to call VMware and see that if their storage media can help you understand why you don't even see the storage when viewing your controller.