Replacement of HD on Dell XPS 2710. Drive Serial ATA-600 can operate in the present?

Similar Questions

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• Dell XPS 9350 (Windows 10 Home x 64) boot at the Startup Menu

  Good morning guys,

  Just got a question on my Dell XPS 13 9350, Windows 10 Home How to access the Boot Menu (where you can see the BIOS, boot options, etc.) when starting from dell, I don't know exactly what and when press to enter the menu, can someone tell me how to do this. I'm new with this laptop and hope you understand. Thank you very much.

  Hello

  Please write to us!

  When you start the system press the F2 key, and which will bring up the configuration of the BIOS.

  You can use the arrow keys that the mouse do not work in the BIOS.

  Thank you

  Robin

• prolific usb-to-serial com port driver problem. I can't load the driver from propper for her. What should I do?

  prolific usb-to-serial com port driver problem. I can't load the driver appropriate for that. What should I do?

  Hello edmcski,

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread on the forums of hardware and drivers.

• I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  If you can still boot your old disk, you can use a program such as one of them:

  KeyFinder: <> http://www.magicaljellybean.com/ >
  Belarc Advisor: <> http://www.belarc.com/free_download.html >

  to read the key out of your old system.

  Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

  HTH,
  JW

• I have just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on the Adobe site to download again. Should what steps I take to download and reinstall the software I pay for every month?

  I have just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on the Adobe site to download again. Should what steps I take to download and reinstall the software I pay for every month?

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Install creative Cloud applications
  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

• I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The solution on the Adobe Web site does not work...

  I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The proposed solution on the Adobe (CS3 products download) website does not work...

  If the page that you are connected does not work, then it should so what happens when you try?  It is possible that it could be a simple matter of enable you cookies or try a different web browser.

  You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• Need a motherboard of Dell XPS 2710

  Hello

  My 2710 went dark after switching SATA MODE in the BIOS.  I tried each listed here end, but can't always get to the BIOS, I think that my mobo is bricked so, I need to find a replacement at a reasonable price.  Dell wants $550, no alternative autour for around $200?

  Thank you.

  Power supply is good. Problem was suspected in the BIOS. I managed to flash with a working one, with the help of a friend with good soldering skills. Indeed, the holes that I talked about in my last post are made to access the bios chip without extracting it. The process was not easy, but we did it! So now, the computer's life! : DD
  Tat was the good news. The bad news is that it looks like the key of windows 8 has been incorporated into the old rom file (this file, I did a backup, but I can't read it), so I can't install my copy legally owned Windows because I can't get the key. By asking the help of DELL, the only response I got was ' you must consider yourself lucky, as you have to restart your computer. " That's a lot. If NO, we will not help you, you must buy another copy of windows. ». I had Windows 8 'customer' (whatever that means).

  So, do not lose hope, with the exception of DELL. ;)

• All new Dell XPS - hard drive dead - why? What to do next?

  Hello

  My laptop is only a few months old. Here are the plug and the summary of what past:

  • Windows Vista Home Premium
  • Western Digital Scorpio WD3200BEVT hard, 320 GB capacity, a new computer laptop Dell XPS M1530, Serial ATA Hard Drive, Interface SATA 5400 RPM
  • Black screen saying no bootable devices, the BIOS doesn't detect HD, no rattling or other noise.
  • Need JPEG and PSD files recovered.
  • It took in a few places, they said he had no visible external damage, but the BIOS would not detect HD.

  Hours before the accident/death:
  I went to my husband's office. I was using an ethernet network connection. The computer company made some changes to their network to prevent me from access to the files of the company and only have access to the internet only.

  Who could do something on my computer? I surfed on the internet for a few hours after making these changes to the network. Then I went home, started again and got the black screen with the error message "no bootable device. The BIOS does not detect my HD.

  Any ideas why this happened on a new computer/laptop HD?

  Do you know of any service data recovery 'white room', which have a fixed rate lower than $ 900?

  Thanks in advance.

  
  

• (Redirected) Old OS disk missing from the hard disk after upgrade windows 10 mSATA (Dell XPS 2710)

  Hoping someone can help me on this issue.

  I installed an mSATA card in my system and installed Windows 10 on the mSATA. I kept my old hdd intact inside, because I wanted to keep my data.

  System starts well and runs 10 windows, BUT the old HDD shows not anywhere on my computer.

  On the computer management screen, it is here and shows healthy. I can't assign a drive letter. Make a right click on the partition does not bring the menu, only the word help. Can't make the system recognizes the disk.

  Someone at - it suggestions? Attached screenshots.

  Thank you

  

  

  

  Hi moonbugs,.

  Please repost this in the software and the operating system, Windows 10 forum help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Dell xps l502x freezes making buzzz sound during playback of the audio or video file

  I have a two year old dell laptop xps l502x, who recently started producing some strange audio buzzz at regular intervals during playback of audio or video file.le sound is very similar to the sound when games used to freeze with the same anonying buzzz sound which is a very well known with the XPS L502X.i used only to have problem that the sound during games used to hang , but recently it has begun to occur during playback of audio or video files too.

  RTZ87,

  I just had a quick glance and the solution is in the thread below. Uninstall 'Dell Support help' and 'Dell Support Assist Agent'. They have been automatically installed on your laptop in the last two days and seem to be causing the problem.

  

• Dell XPS 13 restarts when you wake up sleep on the battery

  Since yesterday, if I put my Dell XPS 13 9350 (10 of Windows) to sleep and wake it upwards again, it starts from scratch, applications are complaining that they have been forced to quit with unsaved files, etc..

  It seems that this happens more particularly if it is on battery, when I wake up. (Either by the way, I'm pretty sure that this is happening if I put to sleep by closing the lid, using the power button or by using the start menu. It also happens if I'm going to hibernate instead of sleep, although I never this have tested only once.)

  I guess this is due to an update that Dell update made a couple of days, but I don't know what it was.

  I since drivers updated from the Dell site & also uninstalled the video drivers (which corrects this problem for someone else on this site) and specifically checked battery-related drivers are up to date, but none of it helped.

  Any suggestions?

  OK, so I finally seem to have set myself (thanks to a post on Reddit).

  The solution:

  1. Make sure you have BIOS version 1.2.3 or later version; Otherwise, update
  2. Stop computer
  3. Start pressing F2 to go into BIOS
  4. In the menu choose the power management, then block sleep, then check the box block sleep upstairs

  This command removes the option menu sleep start > Power (and), but solves the problem. Behavior, it now seems to be in hibernation rather than to sleep when I close the lid or press the power button, because it takes more time to 'sleep' and wake up. It is, it works.

• SanDisk USB Flash Drive & Logitech Wireless Mouse can not find the driver

  I am running Windows XP on a Dell XPS laptop.  When I joined the SanDisk Cruzer Flash Drive or a mouse with Logitech M215 wireless computer detects it and tries to load a driver but just by saying no driver found.  I use other mice wireless and other readers flash without any problems.  I went on the Web from Logitech website and SanDisk and they both say no driver required.  I contacted Logitech and they said it's a matter of Microsoft's operating system.  Where can I get a driver to run both devices.  Also when I go to the hardware profile the other device has a yellow box? next to him.  I try to uninstall the driver and updated it but without success.  Still looking for a driver.  Where can I find the driver.  Help.

  Hello

  1. have you tried plugging it into different USB ports and check?

  2. did you try to use the same flash player and mouse on another computer and check if it works there?

  3. how exactly did you uninstall the driver and reinstall it?

  Connect the hardware (mouse and flash drive) and run the fixit tool in the following article.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  See also:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

• I tried to download for kb973636 auto update and got an error code 646, then I've done a manual download and got an error code 1327 showing invalid drive: o:\ location, how can I change the drive to c:\ drive.

  I had trouble to download the kb973636 update as it failed and I got the error code 646.  So I did a manual download to computer and got the error code 1327 telling me I have invalid drive o:\ and not c:\ drive somewhere.  How can I fix it and it will not happen in the future?    Ronald E Fish

  Hi captainron57,
   
  Welcome to Microsoft answers community forum!
   
  You can follow these links for a detailed resolution:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a971145-86ca-4B80-A545-93a36536d690
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  Post back with the State of the question, for additional help or even if the issue is resolved.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.