Can not install updates in windows vista

Similar Questions

• can not install updates of windows 8, have 13, the error code is 800F0922 HELP

  HAVE TRIED SEVERAL TIMES TO INSTALL THESE UPDATES.  FAIL EVERY TIME.

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-8-updates/74ab4e49-9524-4e91-a258-bfd717a4429c

  ~~~~~~~~~~~~~~~~~~

  Current weather conditions in PA

  Clear 40 ° F / 4 ° C

  ESE 10 mph winds; gusts to 25 mph

• Not able to install updates in Windows Vista, error 64 C.

  Original title: ERROR 64 c

  Impossible to update windows vista home edition

  Hi Jennifer,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that you can not install updates in Windows Vista.

  However, we need more information about the issue to help you better.

  Please answer these questions to better understand the issue:

  1. have you tried to manually download the updates from the Microsoft Download Center?

  2 have you made any changes to the computer before the show?

  3. when exactly you get this error?

  4. is the problem with the specific update?

  I have a couple of steps that should help you with this problem.

  Method 1: Please run the following fix - it:

  The problem with Microsoft Windows Update is not working:

  Method 2:

  Try the methods mentioned in this link and check:

  This problem may occur if Windows Update or Microsoft Update cannot locate the downloaded update.

  Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.

  http://support.Microsoft.com/kb/958055

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

  Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

  LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.

  Help!

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to install other programs and applications?

  5. What are the steps you tried?

  6. What is the exact error message when installation fails?

  Method 1.

  I also suggest you run the fix it tool for the link.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2.

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

   

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let me know if it worked.

• Not able to install updates in Windows Vista.

  Original title: no update: alert

  I had trouble with my PC and only come to discover that my updates have failed since April 14, 2011 - that is to say 95% updates failed. Can someone help me... Please? I'm a complete Newbie, so who takes up this challenge will have to be very sweet (and patient!)...

  Hello
   
  1. What is the exact error you get when you try to install updates?
  2 have had any changes made to the computer before the question?
   
  Check out the following link and check:
  Method 1:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  
   
  Method 2:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
   
  Answer comes back with more information on this subject so that we can send us your request in an appropriate manner.

• I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  About Vista, but is not https://forums.adobe.com/thread/1836232

• Download 80080005 error message when you try to install updates in Windows Vista.

  Original title: error 80080005

  Hello

  I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Try these methods and check:

  Method 1: First of all, make sure that no proxy server is causing this issue.
  a. click on the round to start, in the search field type cmd
  b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  c. has the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press ENTER.

  Method 2:

  Check if the bits service is started.

  a. click Start, type services.msc

  b. Locate the Bits (Background Intelligent Transfer Service) service.

  c. double-click on it and check if the service is started and the startup type is set on automatic.

  Method 3:

  I suggest you follow the steps mentioned in the link one at a time and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the steps do not help, then follow the steps in the next method and check.

  Method 4:

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Method 5:

  I suggest you follow the steps:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.

• Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  ==============================
  The following thread explains how to convert
  the files to a different format... iTunes then
  You should be able to import them.

  Need help to convert itunes to Windows Media
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
  (Scroll to the bottom to detach the message by: musiclover101)

  Or... use the following freeware to convert your
  already downloaded files to the .wma format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your files in iTunes on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can not install updates, or I can uninstall all programs

  I can not install updates not can I uninstall all programs.  When I try it says that I am either in SafeMode or the installation program is not well installed.  I'm not in safe mode so I need to know how to fix the installation program.  can someone give me some information on how to fix Setup?  Thank you.

  To do this. Click Start--->Search---> all files and folders and type in the search box ""msi.dll " without the quotes and click on search." When the search is complete, right-click on one of the msi.dll file and select Properties. Click on the version tab on the page that has ensued. If the version is earlier than 3.1, you must download and install the latest version: WindowsInstaller-KB893803-v2 - x 86-.exe from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=25

  Hope this is useful

  Note: To determine your version of windows and service pack level, click Start---> Run---> type "winver" in the search box and click on 'OK '.

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.

• I start the download for my CS5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  I start the download for cs5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  Hello Tracy,.

  How exactly you are trying to download and install updates?

  Is it a mac or windows?

  Manually download CS5 CS5 download products

  Download the updates manually CS5 for Windows here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows

  Download the updates manually CS5 for Mac here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh

  Concerning

  Jitendra

• I can not install updates for photoshop and the product is registered and properly installed

  I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  Customer chat was worthless, and I am really frustrated.

  You can download and install updates,

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373

  But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.

  Nothing can be done if this is the case.

• I can not uninstall Silverlight and therefor can not install update continue to receive messages to

  I can not uninstall Silverlight and therefor can not install update continue to receive messages to do and it makes me nuts HELP!

  See this: How to clean a facility damaged Silverlight and then reinstall Silverlight

• In the creative cloud applications can be installed on a Windows Vista operating system?

  In the creative cloud applications can be installed on a Windows Vista operating system?

  You can see the tech specs for any product you are thinking about installing via the page following the link to the software Creative Cloud:

  http://www.Adobe.com/products/creativecloud/tech-specs.html#requirements