Use the certificate self-signed on TS 2008R2

Similar Questions

• VPN client using the certificate self-signed on SAA

  Hello

  I need set up a vpn client that use a certificate automatically generated by the ASA.

  The VPN configuration is easy, especially with the use of the wizard.

  The problem is that I need the procedure to configure the ASA as a CA server and how to send the certificate to the client

  Thank you

  Just to let you know, the ASA can act as a CA server for authentication of cert based for ipsec vpn. It is only possible for sslvpn. So in your case, the client should be the AnyConnect client.

• See imprint SHA of the certificate self-signed client webvpn ASA?

  When connecting to an ASA with certificate self-signed, using Cisco AnyConnect Secure Mobility Client 3.1 (10010), the AnyConnect client presents the big red warning box, which is good.  The user must turn off "Block for unknown servers connections" in the preferences in order to complete the connection.

  Is it possible for the user to view the fingerprint SHA1/SHA3 cert self-signed, before disabling the safety block?  I could have sworn that older versions of the AnyConnect client allow the user view the certificate details and fingerprints before choosing to accept and connect.

  You can't make AnyConnect 3.x or 4.x as far as I know. Even a set of Diagnostics and Reporting Tool (DART) does not include this information.

  It is quite easy to inspect although if you simply browse to the ASA to almost any browser interface. From there, you can review the site certificate (ASA), including the footprint of the RSA public key.

• ASA uses that certificates self-signed after upgrade to 9.4.1

  I came across a strange issue after upgrade to 9.4.1... (from 9.3)

  However I access the ASA (browser, Anyconnect, etc.), it offers only a self-signed certificate even if an appropriate SSL certificate installed.

  I checked:

  SSL-trust VPN_Portal_TP point
  SSL-trust outside VPN_Portal_TP point
  SSL certificate authentication CAF-timeout 5
  interface outside port 443 SSL certificate authentication

  is configured.

  • CA is installed, too.
  • Reinstalled all certififcates.
  • Reassign the Trustpoints

  Any ideas would be greatly appreciated... Thank you!

  I did have time to test this out on my laboratory unit yet, but there's a thread related here.

  I'm not positive on the standard resolution immediately - it will bring close watch.

  Perhaps the first person to prosecute TAC may share the resolution.

• Replace the certificate self-signed prominent 5.3

  Select a certificate:

  1 Subject: C = US, S = CA, L = CA, O = VMware Inc., unit of ORGANIZATION = VMware Inc., CN = VVVDCVDID03, [email protected]
  Valid from: 31/12/2013-15:56:35
  Valid until the: 31/12/2015-15:56:35
  Footprint: E93EDE1797C55BC61E95DF625AC33EC8D30DD089

  2 object: CN = .net, OR default certificate of VMware View = VVVDCVDID03.mydomain, O = "VMware, Inc.."
  Valid from: 12/30/2013 15:24:20
  Valid until the: 28/12/2023-15:24:20
  Footprint: 671E847CA3A55FC31AA62034174B29EC37D4DF38

  3 object: CN = * .mydomain .net, O is my company Holdings LLC, L = Grant Park, S = Illinois, C = US
  Valid from: 01/08/2014-19:00
  Valid until the: 14/01/2015-07:00
  Footprint: 1D976E97E9B9C55A02470F45618F7E2CD8763B43

  Enter the choice (0-3, 0 to abort): 3
  Remove the link to certificate successfully 18443 port.
  Bind the new certificate to the port.
  ReplaceCertificate successful operation.

  Yet the certificate still shows as invalid and self-signed view Admin and when I join on the site.  It's showing that ranked #2 in the SVICONFIG.

  In addition to this SVICONFIG does not appear to be installed facing the connection to the server at the point 5.3. Or at least I can't.  5.3 documents do not appear to exist. 5.2 only.

  How can I replace the self-signed certificate in my servers connection and security now?

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  The solution in the end was that the self singing and new cert had the same friendly name of "vrm".  Changed the name of the car to "oldcert" sign and restarted the server connection.  That solved.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• When you modify a form in the DC or Pro Player I can enter text etc., save, close, and return later to change it. However, once I use the function "Fill & Sign" and save the document, it locks the file and all other fields are not editable. Is there a

  Hi guys,.

  When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.

  The signing is FINAL.  You cannot sign a PDF paper advance. Complete and save, do not sign.

• Unable to connect to SMTP using TLS with a certificate self-signed on OSX 10.10.1 (T31.3 & 24.6)

  I can't connect to my server SMTP with TLS on port (send 465 or 587 / 995 receive) using Thunderbird 31.3 or my OS X 10.10.1 24.6 (Didier) MacBook Pro.

  However, I am able to send and receive mail from the same account on my Windows 7 machine using Outlook 2007, using the same settings I configured in Thunderbird. I added the certificate etc.

  http://img.Photobucket.com/albums/v631/Napoleon_BlownApart/ScreenShot2014-12-16at121323pm.PNG (Taken when using 24.6)

  I am the admin of the server and the password and other settings on the side Server are correct! (I'll take a look at the evolution at the same time. I am already back to an earlier version of Firefox because of sloppy coding and broken features).

  Any ideas?

  If the server name is a secret, how you expect to receive mail. Please, we have pretty bad without guessing. Seriously what you are done using a self signed certificate, they are free by https://www.startssl.com/

  My guess is it of OSX who dislikes the self-signed certificate, how Thunderbird to deal with Windows. As you have a copy install Thunderbird and see if it is a question of OSX.

• Looking for input on the replacement of certificates self-signed

  After many hours trying to find an answer, I now turn to the experts for assistance here.  I have Setup initially vcloud with a self-signed certificate and I am looking for help.  After some research, I was able to create a new key file with my CA-signed certificate.  However, I have problems beyond the portion of reconfigure.

  First off I am struck by the: 1433 bug I had when I initially configure vcloud where the configure script does not pick up the port number.  The workaround for this is to add: 1433 to the host name as it the entrance as the port number.  Now that I'm gone, I get an error NewInstall_preInit sql.  I don't understand not even why I need a "newInstall" as I already have a database works.  Here is my command output, maybe one of the guru here can point me in the right direction.

  [root@vcloud bin] # cd/opt/vmware/vcloud-director/bin/configure
  Welcome to the vCloud Director configuration utility.
  You will be asked to enter a number of parameters which are necessary for
  Configure and start the vCloud Director service.
  Please enter the path to the keystore of Java that contains your SSL certificates and
  private key: /opt/vmware/vcloud-director/cert.ks
  Please enter the password for the key file:
  Please enter the password for the private key for the certificate of "http":
  Please enter the password for the private key for the certificate of "consoleproxy":
  The following data types are supported:
  1 oracle
  2 Microsoft SQL Server
  Enter the type of database [default = 1]: 2
  Enter the host (or IP address) to the database: vmgmt1:1433
  Enter the database [Default = 1433] port: 1433
  Enter the name of the database [default = vcloud]: vcloud
  Enter the name of the instance [default = MSSQLSERVER]: vcloud
  Enter the database user name: his
  Enter the database password:
  Connection to the database: jdbc:jtds:sqlserver://vmgmt1:1433:1433 / vcloud; socketTimeout = 90; instance = vcloud
  loading /opt/vmware/vcloud-director/db/mssql/NewInstall_PreInit.sql
  [2 reports]
  Execution of SQL query error: ' IF ((SELECT is_read_committed_snapshot_on FROM sys.databases WHERE database_id = DB_ID()) <>1).
  BEGIN
  DECLARE @sql varchar (8000)
  SELECT @sql = '
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET SINGLE_USER WITH IMMEDIATE RESTORATION.
  ALTER DATABASE ' ' + DB_NAME() + ' "ALLOW_SNAPSHOT_ISOLATION DEFINED;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET READ_COMMITTED_SNAPSHOT ON WITH NO_WAIT;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET MULTI_USER;
  '
  Exec (@SQL)
  END '.
  java.sql.SQLException: Option "SINGLE_USER" cannot be defined in database 'master '.
  at net.sourceforge.jtds.jdbc.SQLDiagnostic.addDiagnostic(SQLDiagnostic.java:368)
  at net.sourceforge.jtds.jdbc.TdsCore.tdsErrorToken(TdsCore.java:2816)
  at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2254)
  at net.sourceforge.jtds.jdbc.TdsCore.getMoreResults(TdsCore.java:636)
  at net.sourceforge.jtds.jdbc.JtdsStatement.processResults(JtdsStatement.java:584)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeSQL(JtdsStatement.java:546)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeImpl(JtdsStatement.java:723)
  at net.sourceforge.jtds.jdbc.JtdsStatement.execute(JtdsStatement.java:1157)
  at com.vmware.vcloud.configure.Db.executeSqlBatch(Db.java:231)
  at com.vmware.vcloud.configure.Db.executeSqlScript(Db.java:190)
  at com.vmware.vcloud.configure.Db.createTables(Db.java:142)
  at com.vmware.vcloud.configure.Db.maybeInitialize(Db.java:301)
  at com.vmware.vcloud.configure.ConfigAgent.configureDatabase(ConfigAgent.java:1631)
  at com.vmware.vcloud.configure.ConfigAgent.start(ConfigAgent.java:396)
  at com.vmware.vcloud.configure.ConfigAgent.main(ConfigAgent.java:295)
  Communication with the database error: Option SINGLE_USER cannot be defined in the master database.

  Just a stab in the dark - the guides call say use a user for vcloud (named: vcloud) not "its".

  Our vcloud database user login has a default instance of the vcloud database.  Maybe this will get around the question (seems to me that THE default connection is master - and before the change of the "vcloud" database scripts he tries to put in single-user mode.

• Certificate self-signed for remote VPN CLIENT access

  Hi people,

  I am trying to achieve two-factor authentication, first with RADIUS & 2nd with self-signed certificate. If I generated of self-signed certificate & trying to import this certificate but error 39 that occur. Only obstacle that authenticate with certificate. I saw some documents for separate setting certifcate servers (CA) & then to import in the clients but I m curious about a certificate automatically generated can be used to authenticate the remote access client.

  ASA additional server failover mode is Local CA is not supported. Is there a way to support local CA.

  Thank you

  Are you talking about using self-signed client certificates? I guess that it will not work. At least it is not scalable. You must use an internal CA for this task. As the local certification authority cannot be used with failover, you can take a Windows Server 2 k 3 or 2 k 8. Another option is to use a router IOS as CA-server. But what take something else as a second factor? I'm a big fan of the use of smartphones with the www.duosecurity.com service.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I need help to find my password for the certificate to sign a document

  Anyone know how I can access my password certificate to sign a document to adobe acrobat?

  Hey patriciav41001663,

  Which version of reader you use?

  In MS Reader, simply click on the Tools tab and click tool certificates to digitally sign a document.

  

  If you use reader XI, then see following link KB doc on the use of digital signatures:

  Player help | Sign a PDF

  If you already have one, so we cannot provide you with information about your password.

  Please make sure that when you get a certificate that is encrypted password, do you remember the password you may need several times.

  I would like to know if it is useful for you.

  Kind regards

  Ana Maria

• Can use GoDaddy certificate to sign into Microsoft Office Word 2010, but not in Adobe Acrobat XI 10.0.09

  When I export our GoDaddy Exchange certificate in a *.pfx file I can import the pfx file to the Windows personal certificate store and use it in Microsoft Office Word 2010 to create a valid, a Digital Signature that can be verified by people outside of our Organization. I haven Version Adobe Acrobat Pro XI 11.0.09 I can't make this work. The creation of an ID of a file and using the same pfx file like I did in Office 2010 seems to work:

  

  but when I actually sign a document, I can not select this ID in the menu drop-down:

  
  

  Here's an example of how this certificate helps create the signature in Word 2010.
  

  
  

  

  
  

  The certificate used has not "signing documents' classified 'area of use '. What is preventing the use of this certificate in Adobe Acrobat Pro?
  

  A certificate has two [optional] extensions that direct how this certificate: use of the key and Extended Key use. Prior to version 11.0.9 Acrobat didn't treat these extensions correctly according to RFC 5280. Since version 11.0.9 Acrobat strictly follows the RFC 5280 restrictions on the use of certificates. MS Word does not have these restrictions.

  Go to Edit-> preferences-> Signatures-> identities & Vertificates trust-> more... Select Digital IDs in the right pane, and then in the left pane of your certificate. Then click on 'Détails' and air (you may need to scroll), if it has an extension of the "key of prolonged use. If it click it and look at its value at the bottom of the left pane. If emailProtection or the value CodeSigning certificate is suitable for the signature in Acrobat. If she has none of these values, but has another value, like clientAuthentication, then it is not appropriate for the signature in Acrobat. The problem in the past was that Acrobat allowed users to sign with certificates that have been published for purposes other than the signature of the document. Version 11.0.9 tight this restriction.

• Authenticate using the certificate

  I have a certificate that I would use to authenticate a network connection.

  The certificate has been installed successfully on the Z10 with an attachment in e-mail.

  I have to use QSslCertificate and a local file to add the certificate to the auth process? Where can I access the locally installed certs?

  Yes, I use ignoreSslErrors and it works fine, but it's the kind of an overkill solution that creates security problems.

  Basically, I wanted to know if I can access the device certificate store.
  My colleague went to an expert on BBLive and got the information that it is not possible and we would have to create our own certificate management using setLocalCertificate.

  Not an API very uncomfortable, even worse than java OS BB.

• Use the certificate and password security on PDFs Acrobat XI

  I would use the security certificate and password on pdf Acrobat XI documents.

  Security for the PDF certificate can be emailed or used outside of our network.

  Security Word from past so within our network, users cannot modify the PDF

  I was able to create an action where I applied the security password, save and then apply the security of the certificate and save, but he keeps only the last applied security - certificate security.

  any help would be appreciated

  With security certificate, you can also change to the document rescrict.

• iOS 10 with certificate self-signed in MS Exchange

  Hello

  I try to connect a 5SE iPhone on iOS 10.0.2 with a MS Exchange Server from 2013.

  The iPhone stops with "can't check the server. On iOS, I had the choice between 'Detail', 'Cancel' and 'Continue '.

  IOS 10, I can choose between "Retail" and "Cancel".

  Is it necessary to import the corresponding root CA to the iPhone?

  After 3 days to talk to Apple, 1^st level 2^nd level, and then 3^rd level, can be referred to as Apple UK 4 tier support of^th , who then told Apple City international partner assistance to the companies. They finally recognized that there is a problem. They will not take any responsibility for the origin of the problem because they say that it is a 'system level cross' IE Apple talking to Microsoft, even if it affects only ios 10. They said they are working on a fix, but it will not turn out until probably the next versions of ios 10. They have apparently will keep me in the loop on their progress.

  For the time being the only solution I found is to use the Microsoft Outlook client for iphones until Apple notifies otherwise.