Can not see a virtual machine server connection mode

Similar Questions

• can not see a virtual machine on machines point when vco supply of completed workflow

  Hello

  My problem, I use vco available by vcac workflows and what finish I can't find a VM on vcac point machine.

  
  

  Kind regards

  Kittanai
  

  What is this with one offers advanced service? If so, have you set a resource custom (in the tab "Advanced Services")? As far as I know, you need to set your virtual machine as your workflow provisioning of vCO output. Once you have done this, go to your Service plan in vCAC (in the tab "Advanced Services") and set the resource "provided" your Service plan your new custom resource. Once I did, the virtual machines began to appear in the tab 'Éléments', but under an option to separate menu on the left under 'Machines' in your p2.png image.

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• Can not power on virtual machines "cannot access the file because it is locked.

  Virtual machines have been working well - then the storage system is down.  After the storage system returns upwards that I can't turn on a number of virtual machines.  Get this error when I try to turn it on:

  Cannot power on vmname on esxhostname.xxxxx.com. Unable to access file < unspecified file name > because it is locked
  error

  1. To check the locks on the Service Console on non ESXi servers, run the command:

     lsof | grep

     COMMAND PID USER FD TYPE SIZE NŒUD NOM_PERIPHERIQUE
     71fd60b6-3631 root 4r REG 0.9 10737418240 23533

     Note: If there is no Console of Service process the locking file, you should receive no printed output. If you receive results, however, file a support request to identify the process and to determine the causes.  If it is a third-party process, however, contact the appropriate provider to determine the cause before you kill the process ID, because it can happen again in the future.

     Stop the process and the lock ID using the kill command. In the example above, the process ID is 3631:

     kill the 3631

     After the termination of the process, you can try to turn on the virtual machine or access the file resource.

  2. To check if the virtual machine is always a world ID assigned, run these commands on all ESX/ESXi hosts:

     CD/tmp
     VM-support - x

     Available to debug worlds:
     WID =

     On the ESX/ESXi host where the virtual machine still works, kill the VM, which releases the lock on the file. To kill the virtual machine, run the command:

     VM-support - X

     Where the is the ID of the world of the virtual machine with the locked file.

     Note: this command takes 5-10 minutes to complete. Answer No to "can I include a screenshot of the virtual machine", and answer Yes to all subsequent questions.

     After the termination of the process, you can turn on the virtual machine or access the file resource.

  Deleting the file .lck (NFS only)

  The virtual machine files can be locked via NFS storage. You can identify this as reported by .lck files. # (where # is the ID of the world that holds the lock file) at the end of the file name. It is a NFS file lock and appears only when you use the ls command as it is the hidden file.
  Beware: they can be removed safely only if the virtual machine is not running.

  Note: VMFS volumes have no .lck files. The locking mechanism for VMFS volumes is managed within VMFS metadata on the volume.

  You must kill the process that is locked, if it is not the case, you probably need to restart the VMware host.
  I tell you from experience most likely end up rebooting it.

• mobile broadband (hauwei e176g) works, but can not see icon/tab in network connections

  I can find the Device Manager device under modems, but can't see it in my network connections. I want to make a shared service for internet, for a second computer connected to the host pc via an ad-hoc Wifi hotspot (that works).

  I use IE 8 and windows XP on a Sony viao VGN-TX5XN.

  Hello

  I suggest you refer to the article below and check if it helps:

  http://support.Microsoft.com/kb/870702

  Also, check out the articles below and check if that helps:

  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx

  The steps from the link below also applies to XP:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

   http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Hope this helps,

• Failed to create snapshot - now I can not start the virtual machine.

  Hi guys,.

  I took a snapshot of my VM and got the error:

  Cannot open disk ' / vmfs/volumes/xxxxxxxx.vmdk' or one of the snapshot disks it depends on.

  Reason: Invalid drive string: cannot mix ESX and hosted style discs in the same chain.

  I deleted the snapshot in the Snapshot Manager, but my VM will always start (same error)

  Can anyone help? Its a vanilla install, just 1 VM on it.

  Thanks in advance

  Always pointing the Flash disk VMX configuration file. Whenever you remove the Flash disk, the drive-VMX configuraiton must be updated correctly. In your case it does not somehow. Anyway, lets get a work around.

  1 take the backup of the VMX configuration file

  2. edit the VMX file

  3 scsi0:0.fileName = "QFES_1.2.25 - RHEL52_x86.vmdk" (Please check the VMDK file name correctly it)

  4. save the file

  5. turn on the virtual machine

  Check your luck now

• can not power on virtual machine after activating the VR

  This is the error I get after activation of the replication of Vsphere and turn on/off the machine. I say feeding because allowing the VR blocks virtual machine. If I disable the replication, the machine starts correctly. The Bayt thing is that I can reproduce a 80 GB drive on this machine, but the minute I have activate the duplication of a 2 TB drive, I have this problem.

  Any idea?

  "An error was received from the ESX host turning on VM Novastor.
  Unable to start the virtual machine.
  Power DevicePowerOn module has failed.
  Unable to create the virtual SCSI device for scsi0:1, ' / vmfs/volumes/4ffda1f1-22a39f8e-bd7d-e61f13f6d8ff/Novastor/Novastor.vmdk'
  Impossible to attach the 'hbr_filter' filter to scsi0:1: limit exceeded (195887110). "

  I guess that's under the limit of 2032GB of Vsphere replication then why make this mistake when I enable replication for this disc?

  2 TB is equal to 2 048 GB that exceeds the maximum size supported 2 032 GB (= to 1,984375).

  André

• ESXi host have not of virtual machines when connected through vCenter

  Hi all

  I am facing a problem with 1 ESXi hosts. All other hosts are working properly.

  All hosts are managed by vCenter 5.1 VM. When I select this problematic host in vCenter and click on the virtual computers tab, it does not display anything other than a blank page. Then, it throws an error saying that the object has been deleted or has not completely created. The screenshot of the error popup is attached.

  However, if I connect directly to the host through the VI client, it does not throw the error and I can see the virtual machines it. If I have vmotion the vms during this host, I do not see these virtual machines via vcenter but I connect directly to the host and I can see the virtual machines. They work very well.

  What could be the cause of this problem.

  Thank you

  AG

  I would try restart the management agent on the host troubled or removing of vCenter and time.

• I can't access my Virtual Machine when the internet connection is disabled...

  Hello... I'm newbie here... I don't know if Iam asking stupid

  question or good question... Well I can't access my Virtual Machine

  When the internet connection is off... it is quite common... or

  obnormal... In my area there is a lot of electricity cuts... and

  interruptions of network of regular power 5 hours ago

  cut... and power cuts not notified... So I can't access the internet

  constantly... Is there any solution for this... Thank you

  your valuable suggestions...

  Thank you and best regards,

  Indianmale.

  Just to clarify - you are unable to connect using the default management tools to the servers in your office.

  Have you tried to remote desktop, telnet, ssh, otherwise?

  I'm kind of thinking he's trying to communicate to the world for the validity of a SSL key

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• can fix wood? "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  Hi all

  I had this error on my windows machine 7

  "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  I know that there is a guy named wood that can be attached, if the vmx file and log files

  Hope that the joint can be used to repair

  Thank you

  Jack

  Welcome to the community,

  I'm sure that WoodyZ will be able to solve this problem and will come with a file like the one I've attached to this message

  André

• OIA 11.1.1.5 - IOM 11.1.1.5 integration can not see the Provisioning Server

  Hello world
  
  I'm trying to integrate the IOM and OIA, I followed the steps that appear on http://docs.oracle.com/cd/E24179_01/ doc.1111 /e23377/integratingwithoimpreferred.htm #BABBEBFC, but when I need to create the provisioning server I do not see the Oracle provisioning server.
  
  I changed all the required files and double checked what they where saved and restarted the server OIA but no change.
  
  I have deployed OIA and IOM on the same area of WL 10.3.5, they are also on Windows Server 2003.
  
  Please I will appreciate any help you can give me.
  
  Kind regards
  Camila

  Hi Alex,

  Thanks for the reply, I forgot to update the post earlier, but I managed to solve the problem.

  When I set up the integration I did all the steps of the integration Guide including the amendment of the context.xml file - iam. It's because OIA is deployed on a Weblogic managed server, so when a change is made on all the files located in the RBACX_STAGING folder, the deployment must be updated.

  Kind regards
  Camila

• Can not see the records of the unit when connecting using microusb suddenly

  Hello

  I think we got a brilliant update because now I can't see my tpt when I connect it to the laptop via microusb port. I am running win 7 64 bit. seriously, what are these developers think. are they just out these apps willy nilly without trying them outthemselves?

  Never mind. the problem has been resolved with just restart the Tablet!