can not see release devices

Similar Questions

• HP Probok 450 G2 Bluetooth can not see my devices bt 8.1 Windows pro x 64

  Hi all!

  I have a problem!

  device: Hewlett Packard Probook 450 G2 (J4s43EA)

  operating system: windows 8.1 pro x 64

  Windows updates: the latest

  BIOS: last

  drivers: on the hp device driver site

  problem: I can see the BT icon near the clock, I turned on the visibility on the laptop and on my 2 android phones, but the pc can't see the phones and phones can not see the laptop.

  So I can't use bluetooth on probook g2 450!

  The Bt on the laptop is only research, but no results...

  What is the problem?

  OK I have solved my problem

  first:

  I uninstalled windows 8.1 pro x 64 and installed windows 7 x 64 home premium

  I have installed all windows updates and drivers of all Hp softpaq listed requible.

  But in the management of devices in bluetooth driver driver default winodws.

  HP softpaq don't ' found realtek bluetooth driver.

  Another problem has been the site of download of hp for this computer does ' t contain the last BT driver.

  Fortunately, I searched this in google:

  and found success!

  CLICK HERE TO DOWNLOAD

  I installed it.

  and this was the solution!

  After installation and reboot, there is another problem:

  the pairing is works, but don't see the send-accept option.

  There is a solution for this problem on the LENOVO site!

  Yes lenovo isn't a very helpful company like HP.

  Lenovo solution:

  CLICK HERE

  Since this all straight!

  Thanks lenovo, thanks google!

  Maybe this works in windows 8.1...

  Maybe...

• I can not connect a headset with my Apple Watch, he is continually looking, but can not see any device.

  M using a 38 mm iwatch sportsman. CNT connect bluthooth headset. It is to keep looking but no new showng device. What should I do?

  Hello

  Check that you have set your Bluetooth headset in discovery / pairing mode (refer to the manufacturer's instructions).

  You will find that you must first disable pairing your headphones for your iPhone (or any other device that they can already be coupled to) until you can pair it with your watch.

  Also, make sure that you follow the instructions here:

  • Use the Bluetooth with your Apple Watch - Apple Support Accessories

  It can also help, when you try to pair your headset with your watch, to move the two devices in a different location (away from any other Bluetooth device can be active) and try again it.

• BlackBerry smartphones can not see the device on my computer memory

  Hello

  I have Blackberry 9000 with a 16 GB SD card.

  I am able to sync my calendar with my laptop running Vista successfully.

  Parameters of memory are:

  Media card support: on

  Encryption mode: no

  Mass storage Mode support: on

  Enable Auto... When connected: Yes (I tried both guest)

  The card has been formatted with the BB.

  I have not been able to 'see' my BB or the card memory in Windows.  I tried 3 computers (an XP and Vista 2) does not.  In one of them, I even tried remapping all the drives except C: SC E:, F:, etc..

  Any help would be appreciated.

  I had the same problem.  Support BB said on the phone was defective and he was replaced by ATT.  Replacement phone had the same problem.  But I found an unofficial patch for the problem; EM.  BB technical support said they do not support this difficulty, although they acknowledged that the problem set is actually a real problem that occurs.

  If your "BOLD" is under warranty have BB tech says that it is defective and get a new one.  Otherwise try your luck with the unofficial fix - it worked perfectly on both phones ATT sent me (but I'm still back together and insisting that ATT send me a phone that works - I should not have to rely on a 3rd party program to repair a defective phone.)

  Do a google search for this exact phrase: "some people have problems with the mass memory" and go to the forum of pinstack site that google finds. Yes, it's "are have" in the expression you are looking for.  It was not a typo.

  You will have to join pinstack (it's free) to download the patch.  If it works for you do not forget to thank the OP there.  He did a great service to anyone struggling with this problem.

• can't see the devices in my macbook pro

  I can't see the devices in my macbook pro

  If you mean they are not recognized in iTunes...

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• I do not see my devices on itunes

  I've recently updated to the latest version of ITunes and now I can't see my devices to change the content.

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Import photos no problem can not see the photos on iPhone

  I upgraded my MacBook Pro to El Capitan.  Since moving from iPhoto to Photos (even before I updated the operating system) when I plug my iPhone 5 to import pictures in the selected library I do not see the photos appear in the import window so that I can select for imports.  I literally had to email it to myself, and then import it into the e-mail.  I work with different libraries within pictures, so I excluded it only love the library system.  Same result, can not see the photos.  Also, I have unplugged and replugged in and tried the other USB port to rule out hardware, while the Photos could force them to see the device as new, and that does not work either.  I tried something another user who had to open Image Capture to see if she could see all the pictures on my phone and it doesn't work, I found (theory was that opening would make Photos recognize as well).  However the Image Capture wouldn't add a USB scanner so I think it's not worthy of trust.  Photos only setting I have enabled is the automatic update to iCloud.  Otherwise, I don't know what another parameter to seek that could block it.

  When the phone is connected USB the phone reboot - many have found this will clear this problem

  LN

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
  http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• Why can not see my uploaded photos thrown windows 8?

  Hello

  I received an e-mail from one of my friends with photos attached to e-mail. I wanted to save my computer. If I click on download and click on the file and click ok. Then, I'm going to open the file and the just blue photo app opens and closes in a blink of an eye and I'm not able to view my photos... And then, in a box gray, he says: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the file. I am getting very frustrated.

  Hi Celine,

  Thanks for posting your question in the Microsoft Community forums.

  From the description you posted, I understand the inconvenience that you can not see the attached pictures in the email with Photo app and you also get an error message.

  Inconvenience caused to you is unfortunate.

  Follow the steps below and check if the problem persists, prior to this, please answer the questions below.

  (1) are you facing this problem on all the images uploaded to email?

  (2) what is the file format of the images you are trying to download?

  (3) where exactly the image is saved?

  Method 1: Download the image to the desktop and now try to open it.

  Method 2: Right-click on the image, choose open with.

  Select Windows photo viewer and check if the image is opened.

  Method 3: Check if your antivirus software is blocking the file.

  Disable third-party security software

  one) on your computer taskbar beside the clock system...

  (b) you will see the third-party security software icon.

  (c) click the third-party security software, you will see a pop up.

  (d) in this pop and select the option to disable, click on it.

  Now the third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If you have questions related to Windows, please do not hesitate to post. We're here to help.

• Bridge cc can not see my camera

  I use PS CC with bridge for a while now, I've recently updated my OS on mac to El Capitan, I plugged my camera for mac just like always but bridge cannot see the camera. I tried to reset the preferences and using a card reader, but still nothing. Please help, I am a photographer download photos every two days and the need for this sorting ASAP.

  The computer can see the camera is not a problem of usb cable I changed the port and also lead to check. Bridge cc can not see my camera

  I tried a few of these ideas and nothing. However, by chance, that I got my Nikon D800 plugged on the iMac and then plugged my iPhone6 at the same time to get these photos and BANG the list filled with both devices. Wonders will never cease.

• Trigger that avoids "is changing, function of triggering/can not see ' error

  Version Oracle 11.2.0.2

  I have a problem where I try to avoid duplicates in a table using a trigger.  Data looks like:

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 0

  1000000001 0

  1000000002 0

  1000000003 0

  1000000004 0

  Equipment = equipment identifier

  Location = location number

  Acct = account associated with the equipment

  I need avoid the same account to have 2 pieces of equipment are allocated to the same location.

  for example

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 1 1234

  1000000001 1 1234

  1000000002 0

  1000000003 0

  1000000004 0

  I can't create a unique index for this table that when there is no assigned equipment (first example) I couldn't have uniqueness through the location and number.  So, I wrote the following:

  CREATE or REPLACE TRIGGER TEST_TRG before update of test WE acct

  Old SEO AS OLD AS new NEW

  for EACH LINE

  DECLARE

  v_chk number: = 0;

  BEGIN

  Select count (*) in the test v_chk where acct =:new.acct and rental =:new.location;

  IF v_chk > 0 then raise_application_error ("-20001, ' multiple devices at the same location not allowed");

  END IF;

  END;

  /

  .. but of course that I'm shot in the table that is being updated, I get the error of mutation:

  setting a day of test set acct = "1234", location = '1' where equip = '1000000001'

  *

  ERROR on line 1:

  ORA-04091: table xxx. TEST is changing, function of triggering/can not see

  ORA-06512: in "xxx. TEST_TRG', line 4

  ORA-04088: error during execution of trigger ' xxx. TEST_TRG'

  I tried this split into two pieces where a trigger calls another procedure to perform the check and write error, but results were inconsistent and end-user demand does not pick up the error for a reason - it seems to process the transaction very well even if the update was not made at the table level.

  Are there other ways in addition to a trigger to achieve?

  Thank you!

  Adam

  Monty77 wrote:

  ... I can't do this, acct is not a null value, it is ' '.  Right or wrong it is not editable as integrated in application logic.

  Thank you!

  Adam

  Then also consider this value in your index of function according to:

  create table test

  (

  equip the varchar2 (10),

  location varchar2 (2),

  ACCT varchar2 (4)

  );

  CREATE a UNIQUE INDEX TestLocationAcct_UK ON Test

  (case when the ACCT is not null ACCT AND! =' ' then location |) « ; » || end of the ACCT);

  Insert test values ('1000000000 ', ' 0',' ');

  Insert test values ('1000000001 ', ' 0',' ');

  Insert test values ('1000000002 ', ' 0',' ');

  Insert test values ('1000000003 ', ' 0',' ');

  Insert test values ('1000000004 ', ' 0',' ');

  Update test set acct = "1234", location = '1' where equip is '1000000000';.

  Update test set acct = "1234", location = '1' where equip is '1000000001';.

  Error on line 1

  ORA-00001: unique constraint (SYSADM. TESTLOCATIONACCT_UK) violated

  Kind regards.

  Al

  Name of the index has changed to testlocationacct

• Can not see a virtual machine server connection mode

  Hello

  I'm testing VMWare View and I have a problem. I installed the ESX, vCenter and the view connection server. I have installed a virtual Windows XP machine and installed VMWare Tools + Agent and can not see this virtual machine when I want to create a "individual desktop" under "Desktop and pools. The connection to the vCenter works very well.

  Any ideas?

  Concerning

  Are the other machines available when you try to add an invidiaul machine?  I was wondering if you virtual center connectivity is working properly.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points