can not start my Windows7 partition
I had a Macbook Pro 15 "opportunity, end of 2011. It has the hard drive replaced by an extra hard drive.
I have decided to install Windows 7 on the extra disc, which has two partitions: one for mac and one for windows.
I used the method of the virtual machine to install windows on the macbook, the installation went well, until the reboot to real hardware. The windows partition is displayed in the mac operating system settings where I can choose to boot from it, but when I reboot I end up with a black screen with a cursor.
the method I used:
If I boot the mac holding the key pressed alt, it shows that the OS X disk... But I can see the partition windows on the desktop, and browse the files of windows...
The original drive (disk0) has a single partition and contains the OS X, disc 1 is the additional drive with two partitions: one for the mac files and one for windows.
sudo fdisk/dev/disk1
Password:
Disk: geometry / dev/disk1: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 0 0 2 - 1023 254 63 [1-1273743359] < unknown ID >
* 02:07 1023 254 63-1023 254 63 [1273743360-191404032] HPFS/QNX / TO THE
03:00 0 0 0-0 0 0 [0-0] unused
04:00 0 0 0-0 0 0 [0-0] unused
sudo TPG - vv - r see the/dev/disk1
See the TPG: / dev/disk1: mediasize = 750156374016; SectorSize = 512; blocks = 1465149168
See the TPG: / dev/disk1: MBR suspicious to sector 0
See the TPG: / dev/disk1: Pri GPT to sector 1
See the TPG: / dev/disk1: GPT Sec at sector 1465149167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1273071088 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
1273480728 262632
1273743360 191404032 3 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392 1743
1465149135 32 table dry GPT
1465149167 1 dry GPT header
sudo gdisk/dev/disk1
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk/dev/disk1: 1465149168 sectors, GiB 698,6
Logical sector size: 512 bytes
Identifier (GUID) of disc: 2079FB32-0170-42A8-89A2-044405B6C35A
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 1465149134
The partitions will be aligned with the boundaries of sector 8
Space free total is 264381 sectors (129,1 MiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 1273480727 607,0 giB AF00 MacExtra
3 1273743360 1465147391 91.3 giB 0700 BOOTCAMP
Can you put the Windows disk in the test and the Bay of hand? You will also need to disconnect the second disk to the SATA bus, until we can get Windows to work.
Tags: Windows Software
Similar Questions
-
Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade.
The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens.
See if that helps...
Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.
-
Can not start, help!
Hello
I use 16 G WiFi touchpad, I can not start my device, it's just to see the HP logo only, I think that my WebOS is dead, how can I get the OS and reinstall?
Hello Refale,
to restore your device, you will need to use the webOS Doctor tool. To access the webOS Doctor tool, you will need to go to http://www.hpwebos.com/account and sign in. Then, click on the Options button of the device next to your keyboard and click on Get webOS Doctor.
There is a link on the site, in case you forgot your password.
If it's still a no go. You can take a look at webOS Internals Web site. They have a list of addresses to download for all doctors to webOS. -
can not start any other os that mac os install dvd
I can not start any version of windows or ubuntu on my mac pro 1.1.
Tried:
Windows 98
Windows 2000 Professional
Windows 2008 Server
Windows XP home
versions of Windows 7 Professional 32 & 64
Ubuntu 10.04 lts 32-bit
Ubuntu 14.04 32-bit and 64-bit
most will show a cd when you hold down the ALT to start up
and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.
searching the Internet, it seems many people have this problem.
Details of my machine:
Model name: Mac Pro
Model identifier: MacPro1, 1
Name of the processor: Dual-Core Intel Xeon
Processor speed: 3 GHz
Number of processors: 2
Total number of Cores: 4
L2 Cache (per CPU): 4 MB
Memory: 16 GB
Bus speed: 1.33 GHz
Boot ROM version: MP11.005D.B00
Version of the SCM (System): 1.7f10
Chipset model: NVIDIA GeForce 7300 GT
Type: GPU
Bus: PCIe
Slot: Slot-1
The PCIe track width: x 16
VRAM (Total): 256 MB
Provider: NVIDIA (0x10de)
Device ID: 0 x 0393
Revision ID: 0x00a1
ROM revision: 3011
The system version: Mac OS X 10.7.5 (11 G 63)
Kernel version: Darwin 11.4.2
Boot volume: OSX
Boot Mode: Normal
Ensure the virtual memory: enabled
64-bit kernel and Extensions: No.
We window directly on the hardware, you must install via Boot Camp
http://www.Apple.com/support/Bootcamp/
a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.
The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/
http://Forum.Netkas.org/index.php?topic=1123.90
Also:
-
I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me
You can repair XP or try the following:
http://support.Microsoft.com/kb/917964
http://support.Microsoft.com/kb/307545TO
Re - install http://support.microsoft.com/kb/978788
-
I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista. The device uses the usbser.sys driver and emulation of the virtual Comm Port.
The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes. Shows Device Manager: device can not start (error Code 10).
Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC. With Xp, it all works very well on more than one PC, with Vista, there are questions. I use the INF manufacturer provided for Vista, still no results.
Any ideas on this would be greatly appreciated.
Hi NuWaveDC,
Thank you for taking the time to post on the Microsoft answers Forums.
Please see the following article for an explanation of this error code 10.
Explanation of error codes generated by Device Manager
http://support.Microsoft.com/kb/310123
Follow the steps listed for the error Code 10 see if this helps solve your problem or not.
Please post back to let us know if this information was useful or not, so that we can help you if need be.
Robyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!
I tried to solve it using the steps suggested,
It's what you tried, if not, please do it might help
See if anything here helps.
Error 1079: the account specified for this service is different from the account specified for other services running in the same process
If you receive this error message, follow these steps:
1. Click Start, click Run, type services.mscand click OK
2. double-click on Background Intelligent Transfer Service.
3. click on the tab to open a session.
4. click Local System account and then click OK.
5. right click on Background Intelligent Transfer Service and then click Start.
0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed
because the download manager could not connect the smart Background
Transfer Service (BITS).
http://support.Microsoft.com/?kbid=910337>
You receive an error message when you try to download updates from the
Windows Update Web site or the Microsoft Update Web site, or when you
try to start the Background Intelligent Transfer Service 0 x 80246008
http://support.Microsoft.com/kb/916251>
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
http://support.Microsoft.com/kb/940520
13:06:42 UTC 08/26/11
-
I have age of empires 3 and I can not start the program.
Hello
I have age of empires 3 and I can not start the program.
The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.Thanks for your help
David
Bink is what plays the scenes cut in many games.
Installation folder of AOE 3 the binkw32.dll should be in games.
If it is then it is may be damaged and reinstall the game normally would set the
problem.AutoPatcher.exe - I do not know because I never use auto-patchers with games.
I have always to download the patch and install manually.
However, my game has the RockallDLL.dll file.I don't really know a good site to lead you to these files.
You can find a binkw32.dll in another game. Try doing a search of
Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
folder of the master installation.There was a lot of discussion on these forums about AOE3 so a
search of these forums may find another suggestion.
You can also try the specific AOE3 forums-Age of Empires Forums - Forums
Age of Empires III heaven Forum
.
-
Hello
Can someone help on this
CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)
I just installed esx 4.0 update, one under vmware workstation and get this error
Try to do this:
Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)
-
Can not start my Mac Book Pro Apple on Dual Boot
Hey guys - need help
I have a 2015 Mac Book Pro that I have a dual boot with Windows 10 of setting, everything went well, but I found that I had lost the ability to open any program in Windows, installation of 'apps' thedesktop went, Edge Windows, search etc had disappeared off the coast of the taskbar. Restoring Windows installation wouldn't work, so did a repair through the control panel within Windows 10 who worked and everything in Windows was back to normal.
But now, I find that I can not boot into the side MAC from my laptop, if I go into my PC the "Bootcamp" of my SSD drive partition is there but no side of MAC.
Any help would be appreciated.
Try to start by holding down the Option key.
-
Can not start my Satellite Pro A10
I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example
Start:
Safe mode
Safe mode with networking
Safe mode with command prompt
Last known good configuration
etc.None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:
multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys
I can't clear the checkpoint.
Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.
Any suggestions?
See you soon
HI Leon,
It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.
Kind regards
-
Can not start up and the utility disk first aid failed
I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp. This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point. I tried new and same problem. So I checked if I could go back to Windows and ran 10 Windows without problem. Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:
-Previous ID in a string of hard link is incorrect (ID =-1130612101)
(it should be 3164355194 instead of 0)
Several of the above errors appeared with different numbers
-Volume bitmap minor meds of repair for orphans blocks
-County of block free invalid volume
-Volume header needs minor repairs
-Lack of notice of thread (id =-1130634630)
Several of the above errors appeared with different numbers
Finally the process 'done' with the 'first aid process has failed. If possible to backup the data on this volume.
Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it. Tried to run disk utility and first aid in vain as above.
So here are the questions.
1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?
2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?
3. I have a Time Machine backup. restore it re - will present the same problem?
4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem. Should I assume that the drive itself is defective and have it replaced? I ran an Apple Hardware Test and were not problems.
1 fix
2. Yes
3 NO.
4 NO.
Back up all data on this disc, including your Bootcamp partition.
-
When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt:
\system32\ntoskrnl.exe. Please reinstall a copy of the above file. I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.
I tried to restore my computer and there is no restore point.
I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:
Turn on your computer and insert the CD or the DVD of Windows Vista.
Install Windows page, follow all of the instructions that appear, and then clickInstall now.
On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.
On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.
On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.
Follow the instructions on each page. On the type of installation do you want? page, clickCustom.
On the place where you want to install Windows? page, select the partition where you want to install.
Click next to begin the installation. You can see a compatibility report.
and then had this error that says;
windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.
Now I am stuck and don't know what to do.
Someone at - it solutions for me. Help, please.
Hello
1. on which the drive was initially installed OS?
2. What partition you selected to install Windows?You can try to perform a startup repair by using the Vista installation disc.
Check out these links for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsHow can I fix a startup (startup)?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problemWhat to do if Windows does not start correctly:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaIf nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.
Kind regards
Afzal Taher - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can not start my Satellite L305D-S5940
My laptop is Toshiba Satellite L305D-S5940 with Windows Vista Home Premium. The following message comes when I try to start it.
Windows could not start. A recent hardware or software change might be the cause. For fox the problem:
1. Insert your windows installation disc and restart your computer.
2. Select language settings and then click on "next".
3. click on "repair your computer".If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred trying to read the boot configuration data.Unfortunately, I do not have the windows installation disc. What am I supposed to do? I can't access "safe mode" by pressing F8. I'd be grateful if someone helped me feed my computer please.
Now, it's quite complicated especially if you cannot boot your laptop in safe mode.
I'm afraid you may not do much and best and solution the easiest would be to new installation OS m.You don t have the windows installation disc, but you maybe DVD recovery?
-
Sometimes I can not start my Tecra A11-127
Hello everyone,
I have a question.
I have a toshiba Tecra notebook a11-127 with a problem.
Sometimes, I can't not start up the computer laptop and sick he had to take out the battery, wait a moment and put it again and it will start again as it should.
Any ideas how this can happen?So I need to take out the battery and put it again before it will start...
GRT
SjónHello
It's not easy to say why this happens, I had this problem in the past, but only once
I've updated the BIOS, and since then, the question only did not appear
But I don't very well if this was related to the BIOS mHowever, you can try to update the BIOS (if new version is available)
Update the display driver can be useful too especially if screen turns black during start-up of the deviceGreetings
Maybe you are looking for
-
All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer. I deleted Firefox and re-installed but the rest of the problem. Help, please.
-
How can I install firefox on a galaxy tab 10.1 10?
I have firefox 10.0.5 on two galaxy tab 10.1 and I would install on 4 tabs more, but the current version of firefox is not compatible. How can I get firefox 10 on these new devices. I is the most stable browser in spotty mobile coverage areas.
-
Cannot be used at all on Windows XP SP3, IE8
Hello The latest version of what I used was 6.1.999.130. I have this problem for a month. When I try to connect using my old MSN login it says "sorry, we did not recognize your connection details". The latest version crashes after launch. Windows XP
-
Is there standard LMB/RMB clicks at the bottom of the touchpad control touchpad area?
I wanted to buy: http://www.x-kom.pl/p/203762-ultrabook-15-6-hp-envy-15-x360-u000ew-i5-4210u-4gb-1000-win81.html# but now I see there no normal touchpad but what does not work as it should in spectrum 13. The case is that each video speak on these ne
-
cannot use the touch pad while pressing a button
So I want to play a game that now requires the keys while using the touchpad, but the touchpad does not move when I take a key. I have a z575 thanks ideapad.