Can not turn mp3 audio sync of the event for broadcast on the timeline

Similar Questions

• Can not get her do correspond with the timeline!

  OK, so I used WMM a ton and I like it... but I'm doing my film more important still-MY WEDDING and it drives me crazy! The timeline will not stay in sync with the video. If I watch the movie and then pause to split a scene or something, the green line is not where the video ends. If I click on the green line, he jumps in a few seconds then it throws my way edition. I have no idea why it's the doin this cuz he did all the time, just where I need the sounds to match perfectly. Also, it stops responding and keeps restarting itself than all 5 movements that I do. I have a lot of memory, so that shouldn't be a problem, but I'm so frustrated! Any help would be GREATLY appreciated! Red thanks

  OK, so I used WMM a ton and I like it... but I'm doing my film more important still-MY WEDDING and it drives me crazy! The timeline will not stay in sync with the video. If I watch the movie and then pause to split a scene or something, the green line is not where the video ends. If I click on the green line, he jumps in a few seconds then it throws my way edition. I have no idea why it's the doin this cuz he did all the time, just where I need the sounds to match perfectly. Also, it stops responding and keeps restarting itself than all 5 movements that I do. I have a lot of memory, so that shouldn't be a problem, but I'm so frustrated! Any help would be GREATLY appreciated! Red thanks

  ==================================
  This project is perhaps too large and complex. Creation
  several small projects and save everyone in the .wmv
  film format may be a better method.

  When all the movies are finished, you can import
  New in Movie Maker, and then drag on the timeline for the economy
  in a single file.

  Of you can import the files collected DVD movie
  Creation software and allow each clip to have a scene
  (chapter). John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to turn an audio waveform in the timeline in first Pro CC

  I don't know why I don't get a clear answer to this question, but can someone help me here? In the first CS6, all I had to do was press the small arrow next to my calendar, and I could see the audio waveform. The arrow is no longer in CC and I can't figure out how else to do this to put on. I use this function constantly, so it's pretty annoying don't not to have it on.

  Scroll the mouse wheel while now the pointer on the header of the track.

• BlackBerry smartphones can not turn off wireless sync

  8330 version 4.5.0.33 (Platform 3.3.0.30). desktop version 4.6.0.6; BES version 4.1.2.15

  I use several address books (personal computer, the company contacts, etc.) I have improved my device and desktop software, and now I can't sync my address via the cable books. I used to be able to go to the address book > menu > options > wireless sync: YES or no. Now, I have no wireless sync option in the address book.

  Anyone know how to get it back? Thanks in advance. Nick.

  Go to address book-> Menu-> Options-> Desktop-> wireless sync: YES/NO

  This applies to OS 4.5 devices.

• can not turn on windows update on the computer or windows update site

  I am running windows xp. tried to start bar of tasks with pc Security Center. I tried to get the updates of the automatic windows update site, but apparently if you do not have automatic updating enabled you cannot run the software on your computer

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• can not turn on my Windows Defender, the next error message... "Windows Defender encountered an error: 0x800106ba"... I want to control programs Start up ii

  I want my system up and running quickly.

  I want my system up and running quickly.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you have none of the above, here's how you Windows Defender:
  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• can not turn off my laptop by the usual means, can it please help

  tried to change my laptop off and he used, what's wrong with it?

  We need more information:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  What is your current antivirus?

  error messages?  If we have the EXACT error message, look in the also event viewer to see if errors are generated when closing attempt.

• EliteBook 2530p. Can not turn on WiFi Windows 10

  EliteBook 2530p, Windows 10 home

  Ive just upgraded the machine above 10 win 10 with the help of this site. Everything works fine except one thing, I can not turn on WiFi.

  The orange LED on the touch screen under the screen and the front edge of the machine are both orange and when I try to use the touch screen to turn it on nothing happens.

  All other keys work fine so I don't think that's the problem. I don't know another way to activate the WiFi on this machine.

  The WiFi card is recognized in Windows 10 Device Manager and I have re-installed the card and made sure the antenna cables are properly connected.

  Anyone had similar problems with WiFi / Win 10 works is not on this machine model?

  Any help or advice appreciated.

  SOLVED

  I'm frustrated, trying to get the WiFi works because it is a machine I was in the process of selling and I had no user file to worry about, I decided to clean install Windows 10 and re - install Windows 7.

  I did this and load all nessasary drivers but no matter what I did the WiFi refused to turn on. I did several searches and HP Wireless Assistant who got the status of 'Wireless LAN' was OFF but the Start button is grayed out so I couldn't activate it.

  While remaining in the wireless Assistant I hit the WiFi button on the touch screen and a message appeared telling me to unplug my Ethernet cable. As soon as it is unplugged the button power on in the Wireless Assistant has become clickable and I was able to turn on the WiFi!

  So it seems that if you connect an Ethernet cable to this model of HP, the WiFi system is disabled and the only way for him help is by unplugging the Ethernet cable.

  I think I'm going to stick with Win 7 because I'm still not sure that the wireless card is supported under Win 10

• Satellite L500 - can not turn on the new wireless network card

  I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
  But I can not turn on wifi with FN + f8 key - Windows.

  This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
  Can anyone provide another solution than to change the map?

  PS.
  I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
  PSP.
  I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

  Post edited by: Ipcur

  Hi Ipcur,

  Why you traded with another wireless network card model?

  He works with the wireless network card preinstalled Toshiba?

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.

• I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do?

  I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do? Is there a place I can call for assistance?

  Contact customer service and ask them to help you.

  Scroll down to still need help?  Click on Contact us.

  Learn how to enable or disable Adobe applications

  Nancy O.

• How can I download mp3 audio library (books) on iPod nano generation 6?

  How can I download mp3 audio library (books) on iPod nano generation 6? Just got one-axle nano gen 6. Library Overdrive will not transfer/load files.

  Import into iTunes and then sync the iPod with this library.

  (138309)

• NB520 - Wifi and Bluetooth works fine but can not turn off

  I bought new toshiba nb 520, almost everything is OK except wifi and bluetooh on the netbook cannot be disabled

  I tried FN + F8 to activate the wifi but it does not work at all, the only way to turn off the wifi windows 7 uses the device for disabled Manager

  is not everything, bluetooth has the same problem, yes it can be turned off by free config and turn a red light icon in the system tray to show bluetooth is in the off State, but after 2-3 seconds the light become blue and the bluetooh is on

  so the summary is
  WiFi = works correctly, but cannot be disabled, except disabled it the windows Device Manager
  Bluetooth = works correctly and can be disabled, but it will be swicth on automatically in 2-3 seconds after it turns off

  I have tried many solution, I had the netbook bios update, reinstall the driver but still no luck
  can anyone here help me

  Hello

  It's really, really strange, I mean the BT and the Wlan can be turned on and off using the Fn + F8 key combination. He s strange that it does not work.

  To my knowledge the Fn buttons are controlled by VAP (value added package) and the Support of additional Flash memory card utility BT stack and Wlan driver must be installed.
  I would recommend following:

  -Uninstall the driver Wlan and BT stack
  -Uninstall the VAP and utility of Flash card support
  -Install CCLeaner and clean the registry (CCleaner is a free tool)
  -You must restart the computer after each step.
  - Then reinstall the driver Wlan and BT
  -Restart and install VAP and Flash cards
  -Restart the unit and check if BT and Wlan can be enabled and disabled.

  NOTE: Fn + F8 should be pressed several times disabled these functions.

• Satellite L30-101 - it can not turn on

  Hello

  I had a Toshiba L30-101 given to me for my birthday in 2006, he initially had Windows Vista on it so because of problems with this program.
  I was later forced to get rid of this program and to install Windows XP, and I have not had a problem since.

  However, last night, I forgot to bring my laptop, normally I do not panic as it happens in sleep mode, and yet when I lift the cover (when I do this windows XP starts and allows me to reconnect my phone) I have met with a black screen, nothing has been loading, nothing has changed, I was faced with a black screen.
  I pressed the standby key and nothing happened, nothing happened even when I hold the button for a bit longer.

  I disconnected the battery, and although 2 green lights showed that I should be connected on the right, I was always with a black screen. I left him a little and he's always like now, only 2 green lights went and it seems that there is no life be it current. I can not turn on,
  I tried to reboot and nothing has changed.

  I don't know what to do as this has never happened before. I might add that, even if I changed the program for XP I didn't no problems with it for 2 years and a half, until now.

  Could someone help me at all?

  Hello

  Have you tried to remove the battery and the AC adapter? Remove the two, wait an hour and try again.

  If it doesn t work I think that there is something wrong with the motherboard. Maybe it needs to be replaced or another part.
  Therefore, you can contact the nearest ASP and ask for help.

  Good luck!

  Welcome them

• MacBook 12 turn off suddenly and not can not turn on again

  Hi all

  Please help me. It's the third, I used the Mac, but it shut down suddenly. I remember that its battery is 60%

  I use window before, so I know no way to use or difficulty Macbook

  It can not turn on for 13 hours

  Please help me. Thanks in advance

  DInh

  Hello

  Try pressing the power button for 7 seconds let go and then press it again. See if that helps.