Can satellite C660-1KT - I delete data from drive D partition

Similar Questions

• I want to delete data from my i cloud storage for the little free space without increasing the storage capacity. How to do?

  I want to delete data from my i cloud storage for the little free space without increasing the storage capacity. How to do?

  Storage of parameters/iCloud/Storage/manage or delete some of the data being synchronized with iCloud, such as photos.

• Satellite C660 - how do I change from 32-bit to 64-bit operating system?

  Can someone tell me please how to move from a 32-bit to a 64-bit for my Toshiba Satellite C660 Notebook operating system?

  No CD came with my laptop so I can't restore.
  I installed the 32 bit for the setting by mistake and now want to change.
  Thanks in advance

  Can you please tell us model right for laptop (C660-xxx)?
  You have created recovery DVD Toshiba s advice how to do this?
  If so try to launch the installation of recovery and check if the option to choose between 32-bit and 64-bit shown on the screen.

• Delete data from database file

  Hi all
  
  I have an 11.1.0.7 database where I wanted to delete a data file. The database is archivelog.
  
  The first thing I did was to ensure that no data has been in the data file. -OK
  Then, because I wanted to only remove 1 week later, I put the data offline - OK file
  On the day (a week after putting in offline mode) I was going to delete/move the data of the table space file, I got an ORA-saying to put the online data file, before back down.
  
  And here is my problem! The database indicates that the data file should recover :(
  
  Issues related to the:
  1. If the data file was disconnected, why he need to recover?
  2. you do that the database won't ask you all archivelogs until now to recover the datafile?
  3-if I do not want to apply all archivelogs, can I just delete the data file by recreating the controlfile without this data file?
  
  Thank you.

  cibernauta wrote:
  Tested and as said it asked the archivelogs, but, since the data file has been placed offline 1 month ago I need to apply a large number of archives.

  What alternatives I have to remove this data from the database file? Is it just to get out all the objects in the storage space, drop and then re-create it without the data file?

  Thank you.

  If you are sure that there is nothing in this file? If so, that the workaround mentioned above will work. Otherwise, you would need to put the file online, get the exported objects and that only it would be possible to move the data.

  HTH
  Aman...

• Delete data from a table with joins

  Hey guys,.
  
  IV struggled for a while with a sql now.
  I'm trying to remove some data from urole based on the www.lesormes.com in the select part.
  The selection is correct, but the part delete Deletes all data in the table urole and not only those found in the select.
  
  How can I delete all data by using a join?
  
  
  DELETE FROM urole
  WHEN THERE IS)
  SELECT *.
  User JOIN urole
  ON user.userid = urole.userid
  AND user.audit_version = urole.audit_version
  JOIN secrole
  ON urole.roleid = secrole.roleid
  WHERE user.audit_current = 'Y '.
  AND secrole.audit_current = 'Y '.
  AND IN secrole.rolename
  ('X',
  « Y »,
  « Z »,
  ));
  
  Thanks for your help in advance!

  Hello

  Welcome to the forum!

  Chances are, you don't want to join in the subquery EXISTS of EPM; It is more likely you want just like this correlated subqueries:

  DELETE FROM urole
  WHERE  EXISTS (
                    SELECT  0
             FROM    user
             WHERE   user.userid      = urole.userid
             AND     user.audit_version = urole.audit_version
             AND     user.audit_current = 'Y'
             )
  AND    EXISTS (
                    SELECT  0
             FROM    secrole
             WHERE   secrole.roleid         = urole.roleid
             AND     secrole.audit_current = 'Y'
             AND     secrole.rolename          IN ( 'X',
                                                      'Y',
                                        'Z'     -- No comma here
                                         )
             )
  ;
  

  or maybe an IN subquery:

  DELETE FROM urole
  WHERE   p_key  IN
              (
              SELECT  urole.p_key
              FROM    user
              JOIN    urole     ON     user.userid          = urole.userid
                                    AND     user.audit_version      = urole.audit_version
              JOIN    secrole     ON     urole.roleid           = secrole.roleid
              WHERE   user.audit_current     = 'Y'
              AND     secrole.audit_current     = 'Y'
              AND     secrole.rolename      IN ( 'X',
                                                   'Y',
                                     'Z'
                                   )
              )
  ;
  

  where p_key is a unique key (not necessarily a single column) of urole.

  It's just a guess; That's all I can do with the information you have posted. Test this carefully before to try it on your actual data.

  Whenever you have a problem, it allows to post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data.
  In the case of a DML (such as DEL) problem, the sample data must re - create the tables as they are to the DML, and the results will be the content of the modified table (urole) after the DML.

  Furthermore, there is a built-in function called user, the user is not a good name for a table.

• How to delete data from the iPhone 5 c?

  How to remove data from my iPhone 5 c?

  What do you mean by data? Applications, photos, music??  It depends on what you're trying to delete.

• Can satellite C660 - 11K - I Add Bluetooth?

  Hello

  I have a C660 - 11K and I understand that this laptop doesn't have a bluetooth technologicalinbuit (can't think why, so it would be useful to have instead of all these different cables for all my bluetooth devices) in any case, is there a way I can add this to my laptop?
  I am running windows 7 Home Edition.

  Thank you

  Hello

  Satellite C660 is not equipped with Bluetooth, but you can use an external USB dongle to Add Bluetooth functionality. These external USB dongles, you can get to 10 to 20 euros and should be available in every store of the computer. :)

• Satellite C660-1F1-Slow After recovering from DVD and fans constantly running

  Hello

  I have a Toshiba Satellite C660-1F1 has an i3 processor and I recovered from the recovery disks. A few days later, everything is very slow and the Fans are always at full speed, even at idle and there is no dust when I opened it and I replaced the thermal paste.

  All of the Suggestions.

  Thank you

  Hello

  Try to optimize the OS version. Check the startup options and disable all applications that you don't need.
  Make sure that all unnecessary applications do not start with the OS. Remove the system from all things, that you don't need.
  Play a little with it.

• Can satellite C660-1J2 - I use a laptop recovery disk

  Is it legal to use another laptop to create a recovery DVD and use it on the laptop of another of the same model.
  Satellite C660 1J2

  Hello

  Purchase of a Toshiba laptop with Windows 7 preinstalled system, you are automatically a Win 7 license.
  For example, you can use this Win 7 on a laptop.

• Satellite C660 - 18 c HDD missing from BIOS

  I have a strange problem with a Satellite C660 - 18 c and I was wondering if anyone had any suggestions.

  This is the laptop from a friend who had crashed earlier. He seems to have tried to reinstall an operating system, although not using is not the recovery media, that he never did when the laptop was new. He has failed to do this, he asked me to take a look.

  The hard drive is still the original Toshiba drive came with the laptop, even if it has been removed and replaced. This allows to do some basic tests on the hard drive, which showed no errors.

  If you start the laptop from a USB key with a Windows 7 Pro installation image, you go as far as to choose a partition to install Windows on to. It shows 'Disk 0 unallocated space 232.9 GB'

  However, he pointed out that "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. »

  I looked in the Bios and I see no trace of the hard drive. For example, if you look under 'Boot', this list shows only, CD/DVD, floppy, LAN and USB drive.

  It seems to make no difference if SATA is set to "AHCI" or "compatibility."

  Does anyone have any suggestions?

  Thank you

  Work generally good disk HARD must be listed in the BIOS (BIOS first page).
  You should see the name of the HARD disk and the size.

  If the first page of the BIOS provides no details on the HARD drive, then the HARD drive was not recognized by the BIOS, and in most cases, this means that the HARD drive is faulty.

  If you are sure 100% that this disc HARD isn't faulty (for example, it works in relation to another laptop), a HARD disk controller malfunction could cause the problem

  But I guess it's s a HARD drive problem

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• Recover deleted data from hard drive

  I was using FireFTP and photos deleted accidentally from a file, but they do not go to the waste such as dumpster I check immediately thereafter.  I have down loaded a file recovery program 'UNDELETER' and when I write the name of the file I'm looking for it claims he found, but he also says "recoverable files excluded by your filters", so I can't get the picture back, one knowing what the message means or indeed knows a way to recover photos deleted on Windows Vista?   Please explain in plain English not computer or an approach step by step to recover lost photos.  Mant thanks in advance.

  Hello

  for any question regarding 'undeleter', you will need to ask for their support

  the more you use your computer the less chance you have to find whatever it is that he will eventually be replaced by new files

  Try this program

  http://www.Piriform.com/Recuva

• Anyone know how to recover the deleted data from CRM?

  I have a site that I've cleaned cases - only to find out that deletion case deleted the actual data.  I always thought of the case as a 'Notification' Center of sorts and didn't delete the case removed all the actual data from the database.  I need to get that data recovered - I searced every forum and the Help Center and I have sent BC Support, but I just wanted to check to see if anyone has come across this problem before.

  Hey there. No, cases are an essential part of the CRM, of forms for example are stored even in the case. Workflow notification emails are simply the notification.

  Just, you see what said support BC but do not expect that you will get the return data.

• Satellite C660 - problem with the upgrade from 4 GB to 8 GB

  Hello

  I have a Satellite C660-124 64-bit with Windows 7.

  I tried to extend the RAM of 4 GB (2x2gb) up to 8 GB (4x2Go), but the laptop is stuck on the 'Starting Windows' screen (I've already updated the BIOS and also if I tried with a new installation, the problem is the same).

  Aries is Kingston 4 GB PC3L - 12800 CL11 204 pins SODIMM
  Link: [http://www.kingston.com/datasheets/KVR16LS11_4.pdf]

  Please
  Thank you to

  Well well, its certainly possible to increase the RAM up to 8 GB of RAM.
  Your case looks like a new RAM isn t entirely compatible or the module could be defective.

  Toshiba says that the DDR3 RAM (1 066 MHz) 4 GB RAM PA3677U-1M4G module should be fully compatible.

  The module PA3677U-1M4G should be the same as the module of Kingston KTT1066D3 / 4G
  You certainly need a module SODIMM DDR3 1066 Mhz PC3 - 8500 204 pins.

• PC Diagnostic in my Satellite C660 tool shows FAIL to HARD drive

  When I run the PC Diagnostic tool in my Satellite C660 it shows the result as "FAILURE" for the hard drive.
  Is there a problem with the hard drive?

  Post edited by: Sammy007

  > When I start the PC Diagnostic tool in my satellite c660 it shows the result as "FAILURE" for the hard drive. Is there a problem with the hard drive?

  He said nothing, I mean diagnostic tool Pc can can show result falsely and the drive works very well himself. In any case, backup all data in case of failure. You can also download the 3rd party program to test the State of the hard drive. (such as hard drive Inspector)