Optimize the MITES on the NOR-HSDIO devices

Similar Questions

• Other devices in addition to the NOR-MXI devices in Device Manager

  On the installation of hardware and drivers in a system with a PC and a rack of 1044 (connected with the MXI-4 kit), XP Pro devices Manager's display (in addition to devices OR MXI) one "Other devices" category a "PCI Device" auxiliary device with the same PCI slot as the MXI card.  This "PCI Device" is wrong with the indication ' this device drivers not installed (Code 28).  If the MXI card is moved to another location, Device Manager still trying to solve and fail this unknown PCI device before installing the real MXI driver and drivers for the cards in the basket.

  Thanks for the reply.

  I found the problem.  I had not yet installed the device driver third CICC (GE/Condor ARINC), who was also present in the basket of NOR.  Once the driver has been installed and the Hardware Wizard recycled properly, the other device has been replaced by the GE/Condor device.

• iPad is set to optimize the storage of photos from device. App Photoshop Express will edit the reduced size copy stored on the device, or automatically process the iCloud kept a life-size?

  Can someone advise please?  I copy all my photos from SD card in my iPad and the use of the Photoshop Express application to modify.  iPad is set to optimize the storage of photos from device. Edit app Photoshop Express small size kept on the device, copy or automatically will process the iCloud a life-size?

  I guess you'll have to manually lower the file full resolution first. I would ' t think that any application would just go and take it automatically from the Cloud. You may need to check if you have not already.

  

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• Dynamically change the Ni HSDIO channels

  I am currently using a PXI-6552 module to generate and acquire I2C signals simultaneously.  I would like to know if it is possible (and how I would go to this topic) to dynamic change channels.  My goal is just to pass the two references of NOR-HSDIO (purple variables) to a new slot - VI that I create from a different set of 5 channels 5 channels.  For example:

  Pseudocode:

  PXI sessions initialize;

  for (i = 0; i< 10;="">

  {

  Set the channels 0-5;

  Generate and acquire;

  Stop the acquisition;

  Set channels to 6-10;

  Generate and acquire;

  Stop the acquisition;

  Set channels to 11-15;

  Generate and acquire;

  Stop the acquisition;

  }

  close the sessions of PXI;

  Basically, I need the fastest way for acquisition channels without having to initialize and close sessions each time.

  I am currently using the HWC downloaded the example .zip from here: http://www.ni.com/example/31200/en/. (I've also attached the two that are necessary for my problem).

  Init HWC Device.vi: (also attached)

  

  Performance Device.vi HWC: (also attached)

  

  I may need on the screws are Assign dynamic channels, Configure Idle State and initial configuration.  However, I don't know if those are the only ones.  If it's possible, can I close the original channels and then assign more?  Or re-call "Dynamic Assign Channels" automatically disables all channels not assigned?  Etc.

  The important things to note: I'll put 5 channels at once - for both acquisition AND generation.   I need to close the channels and proceed with 5 different channels - for both acquisition AND generation.  All channels must be on the State of the 'z' to high impedance permanently.

  If you need further information, please let me know!  Thanks in advance for any suggestions and assistance.

  By trial and error, I was able to find a way to do this:

  

• I want to stop using iCloud for storing my original photos, how do I download the on my device?

  I want to stop using iCloud for storing my original photos, how do I download the on my device?

  When I disable iCloud for photos, it is said that the original for more than 600 photos will be deleted because they have not been downloaded on my device. So, how can I do to download everything on my iPhone?

  Display the information below, to get help with your photo library - Apple Support iCloud

  To disable iCloud photo library for a device unique iOS, go to settings > iCloud > Photos and disable the iCloud photo library.

  To disable iCloud photo library for a Mac, go to System Preferences > iCloud > Options next to Photos, then deselect iCloud photo library.

  If you need to optimize storage on, you all your photos and original videos may not be on your device. To download the photos and videos on your original iOS device, go to settings > iCloud > Photos and select Download and keep the originals. On your Mac, open the photo, choose Photos > Preferences, and select to download the originals of this Mac. Then you can cut iCloud photo library. You can also select the photos and videos you want tΘlΘcharger iCloud.com.

• I can implement using the NOR-6221 SPI? When I try to generate using ctr0 make an error indicating 'Sample clock' is not a supported option.

  I'm trying to use a NOR-USB-6221 to implement SPI in a C++ application.  When I try to configure a digital output task that uses ctr0 as the clock, I get an error stating that 'Sample clock' is not supported and use instead "on demand".  I would be able to use the NOR-6221 and if so how to do this?  Thank you.

  Hi IntAndTest,

  Maybe silly question: are you sure that you have a USB-6221 and not a USB-6212? The USB-6221 supports clocked DIO, but the USB-6212 is not working.

  A problem with your code: when you specify a terminal DAQmx name, it must be is compared to the device (such as 'Ctr0InternalOutput', "AI/SampleClock" or "PFI0") or contains a slash before the device name (like "/ Dev1/Ctr0InternalOutput", "/ Dev1/AI/SampleClock ', or ' Dev1 / / PFI0"). This does not apply to the names of physical channel (like ' Dev1/port0' or "Dev1/ctr0").

  The error is returned from code that you have not displayed? Your says error message DAQmxCreateDIChan failed, but the code you posted does not call this function. In addition, I don't see a call to DAQmxStartTask or DAQmxWriteDigitalU8, U16, U32, whatever.

  Also, what NOR-DAQmx version are you using?

  Brad

• What is the latest version of the NOR-DAQmx driver? 9.7.0 vs 9.6.2

  Hi all... I'm puzzled. I found the version of NOR-DAQmx 9.7.0 released February 25, 2013 and NOR-DAQmx version 9.6.2 released March 4, 2013.

  Read the "readme" files does not lighten.

  What is going on? Two teams who does not speak with them?

  DAQmx 9.7 is always the latest version with the most recent device and the support of the API. The 'Release Date' refers to the post to date of web and it can not match the schema version.

  We'll push DAQmx 9.6.2 Update Service with the DVD of LabVIEW Driver 2012 SP1. DAQmx 9.7 will be available only for download web or included as a DVD with the hardware which requires for the purposes of support.

• When I try to power to the top of our Dell computer, we get a black screen and the message "boot device available. Press button to try again. »

  Pressing enter does nothing, then it usually starts by pressing "ctrl-alt-delete."  The computer runs VERY slowly.  We have Windows XP and also just downloaded Safe Eyes software McAfee, but it was slow & have start questions for a while.  My son also downloads a lot of PS3 games, etc.  Who would have something to do with it so slow?  Is there something we can do to clean it ourselves instead of redoing it to Best Buy and pay $100?

  Hello

  Start are what problems you referring?

  Method 1: May be that the hard drive is not detected. Boot to the Bios Setup and make sure that the first boot device is defined as hard drive and also make sure that save you the settings and check what is happening.

  If your computer is not configured to boot from a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. For assistance, contact the manufacturer of your computer.

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2: If you are able to boot to the desktop then try to perform the clean boot on the computer to resolve the performance issue.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on Startand then click run.

  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  The following articles could be useful.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• How to optimize the WRT 400n for Internet TV

  I've been using a WRT 400n for awhile with 2 pc... a tower near him and a computer laptop about 50 ft, in another room. As much, I would say I am only using the 2.4 GHz to channel 11 band.

  We have just added a Sony Bravia HD TV and a Sony Blu - ray player VD (which is really, as far as I can see, a cool internet access device which can read the DVD). Favorite use is to watch TV shows and movies from Amazon. Problem is, the streaming is very uneven and sometimes what Amazon calls 'connection speed' (which I think is really the network bandwidth) gets so low that the buffering will fail and lose us everything we see.

  So, my question is, how to optimize?

  1. Can I configure the WRT 400n somehow so that the TV / DVD device combination uses 5.0 GHz and this could help. If this is the best option, where can I find detailed advice?
  2. Y at - it than available th firmware update might help?
  3. Could I consider an access point or a Repeater?
  4. Should I go for a router upgraded?
  5. Displacement of the top would REALLY help? I am very reluctant to do this - it is a major concern, but if it's the only option...

  As you can tell, I am naïve in these things and would really appreciate wise counsel!

  Thank you.

  1. the recommendation mentions of connection speeds, for example 10 Mbps. This has nothing to with the frequency band use for a Wi - Fi connection.

  2. the specifications for the BDP-S780 says: ' Wi - Fi built in: 802.11 b/g/n. It does not support the band 5 GHz. 5 GHz band is not an option.

  3 once again: the best solution is to ethernet wiring.

• Hard drive shows in the Bios and Device Manager but not in disk management.

  I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.

  The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.

  Any ideas?

  If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)

• The number of devices that can be assigned to view application you develop it?

  The number of devices that can be assigned to view application you develop it?

  I guess it's a question about iOS, I don't think that android nor Windows have Developer device limits.

  Apple says you can save up to 100 of each type of aircraft a year, it looks like 100 iPads, iPhones 100 and 100 iPods. This is a change from the past, where it could save up to 100 devices, period.

  I had not really noticed this change in policy, but I guess that it is indeed. For years there were rumors of Apple increases the limit of the device, but it never happened.

  Here is a link to apple support document: Management - Support - Apple Developer

• Optimize the edge animate cursors/Pages/symbols for major animation projects

  Hey all,.

  I'm looking for a way to optimize a page slider several created with edge animate CC, it is currently works well on the latest such as iphone 4S etc devices but nothing more really Caryl, the scenario (which I'm sure is a common very) is:

  I have an Edge animate file where I created a several cursor page where each page is a symbol that contains sub symbols which slide on the page and the old slides for symbol page, content off the page, there is a decent amount of animation in a loop on each page.  The total size of the cursor, images etc. code is about 800 k total. There is no other content on the page, just this slider.

  The problem seems to be that each symbol page there sub symbol and its content are active and continue to animate even when they are more on the stage so it would seem that it is treating all 7 pages at a time, instead of just active page/symbol and its current content.

  So my question is: Y at - it a simple way to optimize the edge so that it does not receive and treat a symbol/Page current and it is void / symbols/content at the same time? Or am I wrong somehow on the use of the off scene processing / page content?

  Thanks for your time, it is much appreciated! And a Merry Christmas to all who read here at this time of the year!

  See you soon,.

  Jeff

  Hi, Jeff.

  There is a way to load and unload the symbols dynamically, which can solve your problem.  That being said, this method would not solve your problem of payload to the initial download, but that would mean that your symbols do not play in the background.  Before you try this, have you tried simply to stop the animation of your symbol when you Exchange to another?  It means a little more work in your scripts, but remove dynamic symbols has its own complexities as well.

  Allied http://www.Adobe.com/devnet-docs/edgeanimate/API/current/index.html#Create_symbols_dynamic

  And then look at the deleteSymbol().

  Hope that helps,

  -Elaine

• How to export the list of devices in the Profile Manager?

  Hello

  is there a way to export the list of devices in the Profile Manager on a mini mac running OS Server 5.3?

  Thank you

  How to export data from device in the Profile Manager

  How to export a list of devices and their info?