Can someone help me to write a script for Soundbooth

Similar Questions

• An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  This issue has been resolved with the article below

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

• Can someone help me with the set up for skydrive file sharing?

  In my photo app I am developing the home section. He told me to right click on SkyDrive in the bar tasks, select settings and check "Allow me to share all files with this pc" is turned on. It is, but when I try and access the photos app hosting I still get the same message. Can someone help me set this or tell me if I do something wrong?

  Sharing of the checkbox in the settings of SkyDrive is not related to the photos somehow app.

  Sharing checkbox in the settings of SkyDrive, it's what allows you to go to another computer (such as your office or library) and then go to skydrive.com to access the files on your computer.

• Its took me 3 days to buy Presenter, finally I got it after work again now, I talked to 3 people online support, no one can help her looks like a joke at this stage can someone help me please its asking me for the serial numbers but I buy p

  Its me took 3 days to the presenter bought, I finally got it

  After that there's now work I talked to 3 people online support person can help

  It sounds like a joke at this stage

  Can someone help me please

  His request than me for the serial numbers, but I buy per month

  Hello

  This could be due to a host file incorrectly configured as hosts of operating system files map the hostnames to IP addresses. A misconfigured hosts file can affect the ability of your computer to connect to the Adobe activation servers.

  Follow these steps to see if there is a problem with your hosts file and if necessary

  Please follow the steps below:

  1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
  2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
  3. Save the hosts file: choose file > record under, save the file as hosts.backup, and then click OK.
  4. Look for the hosts file for entries that refer to adobe (for example, 127.0.0.1 activate.adobe.com, or 127.0.0.1 lm.licensing.adobe.com) and delete these entries.
  5. Save and close the file.
  6. Restart your computer and try to turn it on again.

  Kind regards

  Sharad

• Can someone help me to modify a script file?

  Hello world!

  I'm working on some videos in the AE in need of subtitles.

  I found this script that would work very well for me:

  {

  Subtitle generator by! Rocky

  / / change by Colin Harman ( http://colinharman.com/ ) to work on a Mac

  //

  Save this code as

  'subtitles.jsx '.

  //

  Create a text file with your subtitles.

  Each line of text is the on-screen line.

  To have several lines on the screen at the same time

  just separated by the vertical bar (|) character.

  for example ' character talks 1 | 2 breaks in character.

  //

  Create a new layer of text in your publication, adjust its position.

  Make sure the centered text, so it's very nice

  Add markers (Numpad *) where each subtitle line should be shown/hidden.

  Run the script with the selected text layer, and select the subtitle file.

  Enjoy!

  function makeSubs() {}

  var layer = app.project.activeItem.selectedLayers [0];

  If (layer.property ("sourceText")! = null) {}

  file text var = File.openDialog ("Select a text file to be opened.", "");

  If (text! = null) {}

  var textLines = new Array();

  textFile.open ("r", "TEXT", "?");

  While (! textFile.eof)

  textLines [textLines.length] = textFile.readln ();

  textFile.close ();

  sourceText var = layer.property ("sourceText");

  var markers = layer.property ("marker");

  for (var i = sourceText.numKeys; i > = 1; i--)

  sourceText.removeKey (i);

  var line = 0;

  Subtext subTime, var;

  for (var i = 1; i < = markers.numKeys; i ++) {}

  subTime = markers.keyTime (i);

  sourceText.setValueAtTime (0, "");

  If ((i % 2) == 0) {}

  Subtext = "";

  }

  else {}

  Subtext textLines [line] = replace ("|", "\x0d\x0a");

  line ++;

  }

  sourceText.setValueAtTime (TextDocument (subText)) subTime, new;

  }

  }

  }

  }

  makeSubs();

  }

  Except there is a problem. With this script, the first marker makes the first row show, the second marker makes the first row disappear and the third marker makes the second line display. (etc.)

  It is editable so that the first marker would do the first line show, the second marker would do the second line show (etc...) As I do not need the subtitles 'empty' in this case.

  Thank you

  Daniel

  Remove the if ((i % 2) == 0) {} should work.

  If you are unsure how to do this, you can also replace if ((i % 2) == 0) if (false)

• Can someone help with the problems of storage for photoshop cc

  Hello

  Ive recently bought a new mac and have downloaded photoshop top. When I open the program and work on A2 size pages for my portfolio my storage used on my mac goes 92 GB free for only 12-8 GB free, what I read photoshop uses temporary when editing files (I don't know if that's okay) and so use temporary RAM.

  Is there anyway to stop that I sometimes get a message saying my storage scratch is full and I can do is no longer any work, please could someone with more experience let me know if there is a way to solve this problem, or if I simply have to share my new laptop for one that allows me to have more storage RAM.

  Thank you!

  In the screenshot below I've implemented an A2 document for printing.

  The size of the file is 99.6 MB, and the pixel dimensions are 4961 x 7016, which should work without problem.

  If you have several layers the file size, but it must always be easy to manage.

  

• Can someone help me to choose good memory for my computer so I can upgrade from Windows Vista Basic?

  Windows Vista Home basic up grad

  I look to all the graduates of place for my windows vista home basic I need memory and there are many large chip that needsCan a computer help

  Hey O Dwayne,

  I suggest you to return the items.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare?T1=Tab03

  http://Windows.Microsoft.com/en-us/Windows-Vista/this-old-PC-Windows-Vista-is-here-is-it-time-to-upgrade-your-hardware

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Anytime-Upgrade-frequently-asked-questions

• Can someone help me to upgrade my processor for my m7680y help my find the right one?

  Currenlty Im running on processor intel core 2 cpu 6400... I just bought a processor intel core 2 7400, and it did not work! Which is higher than my motherboard processor can handle because I don't understand what specs I should look for...

  RedJackie wrote:
  Currenlty Im running on processor intel core 2 cpu 6400... I just bought a processor intel core 2 7400, and it did not work! Which is higher than my motherboard processor can handle because I don't understand what specs I should look for...

  • Motherboard manufacturer's name: ASUS P5BW - LA
  • HP/Compaq name: Linden-UL8E Socket: 775
  • Compatible with the following processors:
  • Intel Core Duo E6x00 with Dual Core (core Conroe) technology
  • Pentium D 9 x 0 series Dual Core (Presler)
  • Pentium D 8xx series (Smithfield)
  • Pentium 4 series of 6 x 1 (base Cedar Mill)
  • Pentium 4 6xx (Prescott core)
  • Pentium 4 5xx (Prescott core)
  • Pentium 4 LGA775 HT (Prescott core)

  -from your desktop specifications of the motherboard .

• Write a script for form

  Can someone help me to write a script? What I have is a drop-down list (named Relation1) with three options; Self, spouse and significant other. A subform1 and a Subform2each subforms have the same fields. The user end would first fill all the fields of the subfrom1, and then they came to the drop-down list of the list "Relation1" - say the selection 'self', what must happen, it's fields of subform2 pre-populate with the info to end-users, they typed in the fields of subform1.

  Here's what my hierarchy looks like:

  Form1

  Page1

  PatientInfromation (Subform1)

  FirstName

  LastName

  Address

  Date of birth

  Sex... etc...

  Relation1 - combo

  Gites

  Spouse

  Sig.Other

  PrimaryInurance (Subform2)

  FirstName1

  LastName1

  Address1

  DOB1

  Gender1... etc...

  I have big problems with finding how to write these lines upwards, so if someone could give me a code base, I can understand the rest I don't know. Also, I don't know if I have to use FormCalc or JavaScript. I tried and tried to figure it out by reading questions on the forum for the past 7 HOURS on my own.

  Any help would be much appreacited.

  Hello

  There could be many things - welcome in the world of LC Designer!

  However, there are two ways to sort out what is happening...

  First of all, when you're in the script editor there is a "Check syntax" button above the window. Clicking on this will check the current script. If there is a syntax error that appears red:

  

  Then, when you are either found form in LC Designer Preview or Acrobat/Reader, then pressing command + J to display the Javascript Console. If there is an error in the form, it will help you to find, interpret and solve - Javascript Console is your friend:

  

  I am convinced that you will be able to get this working, it will take just a little cooperation.

  I didn't know your form, so here are some suggestions that may or may not be applied:

  1. Name of the objects that you will, this includes pages, subforms, and objects. This makes it so much easier to reference objects in the script.
  2. Try and stay away reserved words to name objects. For example 'null', 'name', 'x', 'h' etc...
  3. If you are in the script editor and you want to reference an object in the script there is a very easy shortcut. Place the cursor on the object and press on/hold Control. The mouse turns into a 'v '. Select the object and the reference will automatically be inserted into the script. The smart real thing is that LC Designer put everything as the reference needed. If the two objects are the same subform, it will put only in the name of the object. If the objects are on different pages, or some subforms are unnamed, then he put in the fully resolved node. You really need to try this; master it. IT WILL REALLY HELP YOU. When you look at the script in my example, I typed all sentence that at all. Just point / control / click.

  If a letter is on the spot or the smallest of syntax errors, the script fails. The tools above will help you.

  Try and stowage, where is the problem and I can help you. It will also help if you can share the form. There are Acrobat.com or other file sharing sites. You can also send me a private message and I will give you an e-mail address.

  Have a good weekend!

  Niall

• Hello, I have a creative signature cloud trying to renew the plan and will not appear in the information of the plan page. What should I do? adiquiro a new plan? or can someone help me?

  Hello, I have a creative signature cloud trying to renew the plan and will not appear in the information of the plan page. What should I do? adiquiro a new plan? or can someone help me?

  Hello

  For more information, see the following links:

  Renew, restart, or extend your Adobe Creative Cloud membership

  'Renew your membership' message when you start an Adobe Creative Cloud application

  If nothing helps, please get in touch with support with adobe:

  Contact the customer service

• Can someone help me create a script to repeat to simply open the dialog box to create a link?

  Can someone help me create a script to repeat to simply open the dialog box to create a link?

  the "Connect" command uses the same dialog box as the command to "Place", except for the option "Replace" verified... so, use Ctrl + Shift + P to bring up the place dialog box, select your new image and select the checkbox "replace".

  If check 'Replace' with the mouse slow you down, after you have selected your image, the tab key 'press' 3 times to change the focus, and then press the SPACEBAR to check it out, then ok to place.

• I can't write in lowercase, can someone help me in EPS from uppercase to lowercase?

  Hello

  I just bought PES 13 and I had the same problem with a version of PSE olver: case change from one day to another and I can't write in lower case, even if I push the right button and if I change fonts...!

  can someone help me?

  Suggest that you reset the preferences.

  Go in Edition > Preferences > General. glance at this:

  

• Script for the selection of consecutive paragraphs - can someone help me?

  Hello

  I have this script that works very well. He then applied following a Style to the paragraphs I selected with the keyboard in Indesign CS5:

  var style_name = "cabecalho."

  var doc = app.documents [0];

  var first_pstyle = doc.paragraphStyles.item (style_name);

  var cur_sel = app.selection [0] .paragraphs;

  cur_sel [0] .appliedParagraphStyle = first_pstyle;

  If (cur_sel.length > 1)

  {

  for (n = 1; n < cur_sel.length; n ++)

  {

  cur_sel [n] cur_sel [n - 1].appliedParagraphStyle.nextStyle = .appliedParagraphStyle;

  }

  }

  But before you run it, I use the keyboard to select the 3 paragraphs for the script. I know that it is possible to add code at the beginning to do the script select the paragraph where the cursor and the next 2 paragraphs and avoid manual selection because it's always 3 paragraphs.

  I don't know how to do this. Can someone help me?

  Thank you in advance. Greetings from Madrid

  It's a little rough, but you get the picture:

  var style_name = "cabecalho"var doc = app.documents[0];var first_pstyle = doc.paragraphStyles.item(style_name);var story = app.selection[0].parentStory;
  
  var cur_sel = app.selection[0].paragraphs[0];cur_sel.appliedParagraphStyle = first_pstyle;
  
  var nextpar = story.paragraphs.nextItem (cur_sel);nextpar.appliedParagraphStyle = cur_sel.appliedParagraphStyle.nextStyle;
  
  cur_sel = nextpar;var nextpar = story.paragraphs.nextItem (cur_sel);nextpar.appliedParagraphStyle = cur_sel.appliedParagraphStyle.nextStyle;
  

  Peter

• The scale of the vector graphics. Can someone help me...

  Hello

  I confess that I'm not a coder. I tried to learn java script, but I think that's not in my "nature".

  If anyone can help with this one? I have a book with hundreds of vector graphics inserted (wmf and eps). When there is a change in the graphic dimension and I recreate a link to the files to update the Indesign CS5 content, the result inside the container is not updated to the real dimensions of the chart. I have to select the graphic, resize to 100% and after that I must apply "to adapt to the content of the framework. I think that it is very easy to achieve with a script. Can someone help me?

  Thanks in advance,

  Maria

  Although I don't know script and can announce that GREP, I am a student and I use it every day with great benefits...

  It is easy to script, but only for those who know how to do... InDesign would win easy to save, such as Illustrator and Photoshop Actions... No reason to worry, though. Just ask in the friendly Scripting Forum

  In addition, a good way to try complicated GREP discovered is to build using a GREP style, with a character style that applies Hot Pink pointed out Comic Sans Bold to "found" text Turn on the Preview button, write your GREP, check if it highlights everything that you want, and then copy the definition and remove the GREP style. Paste the definition into the search field and go.

  This Javascript comes in two parts: the first controls to reduce by half if you have a graphic selected with the black arrow (a normal selection). If so, this single chart is resized and mounted. Otherwise, it scans all the graphics of the document as a whole and apply controls to all the graphics. If you think it's a little too much, do not include the 2nd halve of the script, everything after the line "eventually."

  Copy what you need, paste it into the Adobe ESTK editor and save in your Script file as "resizeGraphic.jsx". Select an image and double-click the script, or otherwise, do not select a single chart and run it to resize / refit everything. (But only if you dare).

  If you need isn't a lot, don't forget that you can add a shortcut to the script with the command editor keyboard; It automatically shows you in the "Scripts" section in there.

  //DESCRIPTION:Size to 100% and Fit to Frame for selected image
  if (app.selection.length == 1 && app.selection[0].hasOwnProperty("graphics") && app.selection[0].graphics.length == 1)
  {
       app.selection[0].graphics[0].absoluteHorizontalScale = app.selection[0].graphics[0].absoluteVerticalScale = 100;
       app.selection[0].fit (FitOptions.FRAME_TO_CONTENT);
  }
  
  // OPTIONALLY!
  else
  {
       g = app.activeDocument.allGraphics;
  
       for (i=0; i		   

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.