CAN´t converted starting machine

Similar Questions

• can I convert poweron machine in vmdk file?

  I use with vCenter server ESXi 4.1 and I need to convert file to 'market' machine because later I import into my Vmware infrastructure

  Server.

  If I use "Vcenter converter standalone client" I can only to specify, as a destination, "Vmware infrastructure server" and not any local folder

  'Physical Machine' to convert is on the public network.

  My server vCenter in the private network.

  Powered on Linux machines can be converted to a virtual infrastructure only.

  In case your concern is safety, the mode of operation of the converter for Linux P2V is safe - it creates the destination machine and it fuels from a live CD. Then it's this destination VM that connects to the source and the fact cloning. If you are allowed to configure the firewall to allow a SSH at the source, it should be good (see pages 12 and 26, 27 in the user's guide)

  If you can not afford, you can optionally install a temporary ESX Server somewhere (in a DMZ?) and convert it.

  HTH

  Plamen

• A virtual machine created in ESX 4 can be converted to run an ESX 3.5 Server?

  The subject says it all.  Our main office has created a virtual machine on their ESX 4 server running.  They want us to use the same but we are running ESX 3.5.  We have no time to upgrade our server to 4 again.  We get an error when we try to start by saying this is not not compatible because it was created with a version with more features.

  If a virtual machine created in ESX 4 can be converted to run an ESX 3.5 server using converter?

  most important:

  change

  virtualHW.version = '7' to '4 '.

  in the vmx file

  then change

  ddb.virtualHWVersion = '7' to '4 '.

  in the vmdk file

  the other changes are optional - for example, you need to remove the lines that start with pciBridge and all the lines making reference to... .pciSlotNumber

  also take care of not to use more then 6 PCIdevices in 4 virtual material - i.e. the sum interface cards scsi controllers + network + video cannot be greater then 6

  If you have a time that is very simple and much much much faster then converter - post an example if you want

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Can I convert a server disk to a virtual machine?

  I have a number of OS X 10.5 servers running on hardware that is incredibly underused.  Since the Fusion 3 supports running OS X Server virtualized, is it possible to convert a live server disk to a virtual machine to the BootCamp to VM? I could run all 5 of my server on a single Xserve systems. I dug around, but everything points to a new facility to achieve this.

  Thank you

  Tim

  Yes, it is possible to convert physical machines to Mac OS X Server VM. I've posted instructions on how to do this in the following thread: Re: Snow Leopard Server VM existing?

  In your case, the only thing that needs to change is the version of the OS - pick instead of 10.6 10.5. I tried this with one of my machines so far, I would be interested to comment on the question of whether instructions to work for you. I'll probably convert this post into a document at some point...

  I also thought the ability to hire only the OS X physical disk partitions without copying the data (like Fusion for Boot Camp). However, Fusion currently only supported the MBR partition tables to access raw partitions, and most Macs are partitioned GPT (or hybrid MBR + TPG). You can try to use Library/Application Support/VMware Fusion/vmware-rawdiskCreator to see if it recognizes the OS X partitions. If so, you should be able to create a virtual disk that references the partitions and boot from it as you would for a machine virtual Boot Camp.

  It is also possible to use a physical disk full (instead of individual partitions), but you would need to have partitions not mounted before using virtual machines that reference the physical disks. If you are interested in, there is a link in this thread as well.

• How can I convert my friends to the Game Center on Facebook?

  With the new iOS for my iPod & iPad, I lost all my friends Game Center.  I have two games that I play as I would like.  How can I convert my friends to the Game Center for Facebook friends?

  You do not have. They have two different systems. What you need to do is to start on. For example, if your game has a forum or support page, they may have a way for people to communicate to a friend. Or if they have a facebook page, they probably have a system for "I want to make friends."

  It is now up to the games themselves to put in place the means to a friend using iMessage. You will need to wait for your game to do.

• microsoft office files can be converted to Pages

  Microsoft Office 2008 files can be converted to Pages

  Pages can open and edit Word (.doc or .docx suffix) documents without problem, as the same does not contain some weird formatting or such.

  You will need to explicitly start Pages and open the document in the open air... on the file menu, since by double-clicking Start Word (or set up a warning that the program is not available). Once you have saved it as Pages (.pages suffix), you will be able to open it by double-clicking.

• How can I convert ASF files to JPEG

  I have a camcorder DV2500 - small and cheap, but it works.  The pix, that I used to take and put on my computer had jpeg for an extension. all of a sudden was last year the extension ASF when I saved it on my computer and other computers can not open the ASF files. How can I convert ASF JPEG?

  Whoa... now say you they are video files? That's what I
  suspicious, and of course change to JPEG will not work...
  So what happened to the idea that it was JPEG image
  files? Maybe I just misunderstood your original question.

  If you need to convert ASF files to another
  format of... WMV would be a good choice.

  The following information may be useful:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How can I convert a .mp4 file to a .wav file?

  What is the difference between a .mp4 and .wav file?

  How can I convert a .mp4 file to a .wav file?

  Hello

  MPEG-4 (.mp4)

  MPEG-4 is a specification of the international standards organization (ISO) that covers many aspects of multimedia presentation, including compression, creation and delivery. Although the video compression and file container definition are two entities separate and independent of the MPEG-4 specification, many people mistakenly believe that the two are interchangeable. You can implement only the parts of the MPEG-4 specification and stay compliant.

  The file format MPEG-4, as defined by the MPEG-4 specification, contains encoded MPEG-4 video and audio content encoded AAC Advanced Audio Coding. He usually uses the .mp4 extension. Windows Media Player does not support playback of the .mp4 file format. You can reproduce .mp4 media files in Windows Media Player when you install the decoders compatible DirectShow MPEG-4 packs. MPEG-4 compatible DirectShow decoders packs include the Ligos LSX-MPEG Player and the EnvivioTV player.

  Audio for Windows (.wav)

  Versions of Windows Media Player that support this file type:

  Windows Media Player 7

  Windows Windows XP Media Player

  Windows Media Player 9 Series

  Windows Media Player 10

  Windows Media Player 11

  Windows uses the file Wave Form Audio (WAV) format to store sounds as waveforms. One minute of its coded in PCM Pulse Code Modulation can occupy as little as 644 kilobytes (KB) or 27 megabytes (MB) of storage. This size of the storage space depends on the sampling frequency, the type of sound (mono or stereo), and the number of bits used for the sample.

  Similar in format AVI, ASF, WAV is a container file only. Audio content that is compressed with a wide variety of codecs and that is stored in a .wav file can be played in Windows Media Player if the appropriate codecs are installed on the computer. The most common audio codecs that are used in .wav files include Microsoft Adaptive Differential Pulse Code Modulation (MS ADPCM) and uncompressed Pulse Code Modulation (PCM).

  I also suggest you to perform a search engine of search favorite you hot to convert a .mp4 file to a .wav file.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How can I convert a bak of acad file to a dwg file

  How can I convert a bak of acad file to a dwg file?

  [Original title: Donald]

  Hello

  Start here http://knowledge.autodesk.com/support

  Autodesk forums would be a good place to ask this question

  http://knowledge.Autodesk.com/community

  Don

• A stand-alone 1252 can be converted to AP light?

  I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.

  I am also unable to find a tool to upgrade for this model.

  Is it possible to convert this device?

  Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:

  Here is a method to perform the conversion.

  * Method 1: (Mode key) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default

  5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  6. connect the Ethernet port on the AP to your server TFTP (laptop)

  7 press and hold the mode button and power off of the AP.

  8 power back the AP while constantly maintaining the button mode for 20-30

  seconds.

  * Method 2: (Archive command) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  5. connect the Ethernet port on the AP to your server TFTP (laptop)

  6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3

  ****************************************************************************************************************************************

  The other direction (lwapp to stand alone)

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  ****************************************************************************************************************************************

  If you must manually 'Prime' the LWAPP:

  Ap #lwapp AP ip address

  AP #lwapp ap ip default-gateway

  Ap #lwapp AP controller ip address

  Hostname ap AP #lwapp

  (optional)

• My password has expired on Windows 7 and I can't access the machine

  I have a Samsung Windows 7 Home Edition laptop. Last night, the password has expired (apparently without warning) and now I can't access the machine. I tried Safe Mode, but it returns the sign on screen. Tried to fix and had the same end result - a return to the login screen. There is only one account on the machine.

  When your password has expired then, you will be immediately prompted to enter a new password. Unless you enter a new password, Windows won't let you continue.

  No, I had not given the possibility to enter a new password. It's a stupid system to have passwords expire on home computers.

  What you say does not correspond with my own observations.

  Restart in Mode safe mode, and then log in as administrator. The password is usually empty. Now, you can reset the password for your existing account.

  When you're done, plan in advance and create, test and document a second admin account.

  To avoid that your passwords expiring, follow these steps:
  1 log in under an administrator account.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET accounts /maxpwage: unlimited

• How can I convert my user standard ac the administrator account

  my administrative ac transferred to standard acre now I have no privileges to add or remove the softwareor programe. He asked me to provide the administrative password. well kindly help me how can I convert my standard user in adminstrater ac ac

  my administrative ac transferred to standard acre now I have no privileges to add or remove the softwareor programe. He asked me to provide the administrative password. well kindly help me how can I convert my standard user in adminstrater ac ac

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Set Windows to a point before you demoted the admin account.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Can I convert...

  This audio file appears that a channel has been compromised.
  I don't know what to do to start. Can I convert it to mono - and then convert it to stereo?
  Is it possible to separate the right the left channel left / double in right?

  Let me know!

  Thank you

  

  There is no interest to convert it to stereo, once you have converted to Mono, unless you enjoy wasting disk space or will later apply stereo effects.  You can use edit > convert sample Type and change the channels to Mono.  Click Advanced and set left to 100% and 0%:

  

  You can also copy from the left channel and paste in the right channel.  Choose from the beginning of the file to the end of the damaged area, but click the button [R] on the leader of the extreme right dB to disable the right channel.  Press CTRL + C to copy the selection to the left channel to the Clipboard:

  

  Click on the [R] button to activate the right channel and the [L] key to disable the left channel:

  

  and press CTRL + V to paste the audio data to the right channel.  Click the [L] button once more for both channels are enabled

  

• How can I convert a PDF file that is larger than 100 MB?

  Hello! How can I convert a PDF file that is larger than 100 MB?

  Hi larissat90944947,

  As you have discovered, there is a 100 MB file size limit for files to download for ExportPDF online service. Acrobat has such a limitation, however. If you want, you can start a free 30 day trial of Acrobat. You can download the trial of http://www.adobe.com/products/acrobat.html.

  Best,

  Sara

• How to convert a Machine of VMWare ESXi 4.0 to run on VMWare Player

  Hi Experts

  I am new to VMWare and need help, we are running ESXi 4.0, I installed on our Windows Server (Windows Server 2003 Standard Edition SP2) the following:

  -VMWare vSphere Client 4.0

  -VMWare vSphere Host Update Utility 4.0

  -VMWare vCenter Converter Standalone

  We have currently x-2 VMS Machines on our server ESXi (ISSDBN01 & ISSSAP), ISSAP installing Windows Server 2008R2 Standard Editon and SAP, I now want to convert this Machine VM (ISSAP) so I can play on / via VMWare Player. My steps were as follows:

  -Turning off the machine that needs conversion

  -Make sure that I am on the parameters users & groups

  -Convert the Machine (ISSSAP) using VMWare vCenter Converter Standalone VM

  Once the conversion is complete it converts a 145 GB file (that is stored on an external hard drive and the machine has x 2 100 GB disks = disk C and data disc), I select the .vmx with VMWare Player (version 3.0.1.11056) file that I use on my laptop (running Windows Vista Business SP2, 4 GB of RAM), but it does not seem to boot up It keeps saying "Windows is loading files", I Googled it and came across someone adding the parameters of the resolution of the .vmx file.

  I'm not sure what to do now that I need to convert this machine as soon as possible, as I have to get a copy of this machine and test upgrades (because the server is going to be broken and most of the parts used for our hosted server); can anyone help me on what steps I must take to ensure that I convert it properly so I can play this machine converted by VMWare Player.

  Thank you very much for any help, much appreciated.

  Concerning

  Kurt Walters

  Hello Kurt.

  I just have a question about my machine converted, is there a best practice or a better way to convert a VM Machine.

  It is really not a good practice. The most important part of the conversion is the correct selection of the controller (as you did) and disk size/commissioning type. The other settings depend on what you want to achieve. After conversion, review the settings of the virtual machine to ensure that everything is as it should be for example (guest operating system, controller, network,...)

  You can also download the latest version of VMware Converter 4.3 which is supported for Windows 2008 R2 and Windows 7.

  Thank you very much for your help is was extremely useful and appreciated.

  You are welcome. If you believe it, feel free to use the 'proper' or 'Useful' buttons

  André