can't even drive without password startup screen

Similar Questions

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• unlock the drive without password for bitlocker in windows 7

  unlock the drive without password for bitlocker in windows 7

  FORGET password & key recovery

  Help, please

  Hello

  In your Microsoft account. To get your recovery key, go to BitLocker recovery keys.

  • Or ask for help:
  • Ask someone with administrative privileges on the same PC to unlock with their key.
  • If your PC is connected to a domain (usually a computer from work or school), ask a system administrator for your recovery key.
  • If you still can't, you will have to reset your PC. Learn how.
  • Related topic:

  «Have forgotten the password and not be in immediate possession of the recovery key, your only chance to unlock the drive is if you supported the key until your space storage Microsoft Account or cloud (e.g.: Dropbox, OneDrive).» The key to your Microsoft Account backup can be done during installation for Windows 8 and later, but is not supported by Windows 7 built-in mechanisms. As you use the latter, you would have had first to save the key to an offline storage device (for example: USB key) and transfer it to OneDrive or another cloud storage provider. »

  http://superuser.com/questions/790379/BitLocker-lost-BitLocker-password-and-recovery-key

• Anyone can use my phone without password afetr ois 10

  Anyone can access my phone without my password after update to 10 months

  You have a question?

• How can I remove phone without password icloud account

  How can I remove an account from my iphone icloud 6 without password.

  You can not. If the Apple ID that the iPhone is locked is yours and you can provide original proof of purchase to Apple, they may be able to help.

  If you are not the original owner of the phone and that Apple ID it is not yours, the phone doesn't help you.

• I want preview to open .pdf, not Adobe Reader.  Can I disconnect drive without uninstalling?

  I want ot s open .pdf in preview, not Adobe Reader.  Can I do this without uninstalling the drive?

  control by clicking on a PDF file > open with > overview

• HP laptop - 15-r224tx: can't access BIOS without password

  I try to access my BIOS but do not have the administrator password.

  When trying to jump by pressing on enter it fails and I get a message "system disabled [12345678]."

  The most recent value included in the disabled system message is 68026369.

  Can you please provide the password so I can access my BIOS?

  Hello

  Use the code to reset below

  77984969

  If the above does not work, follow the steps below to link to generate the reset key

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/TD-p/5010033

• my desktop pc does not recognize my password, can't do reset disk just dvd e-reader, not f g h, can't install flash drive without password. Can I reset to factory settings, if so how.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 Setup(on USB Drive, but I didn't actually install it just tested out to check if valid) causing constant reboot can't even get to the start screen where I have connection on my Chromebook (AcerC720)

  Also if you're wondering why I'm posting on this forum about microsoft, it's because you guys would probably well informed of the problem.

  You can start by unplugging all non-essential devices you may have connected to the computer.

  If the problem persists.

  Start the computer before Windows starts to load, press F8 repeatedly until the recovery environment is responsible.

  Click on repair computer

  This will load the advanced Recovery Options

  Click on solve problems

  Click on startup repair

  Follow the instructions on the screen.

  See if it solves the problem.

• Can't go beyond blue HP startup screen

  In the hope of some help... I have a HP Media Center with Windows XP Media Center 2005 m7170n.  Met a virus last week (Redirected my research on the internet) and using Symantec Technical Support to rid the system of it and now my system won't boot.  On the power on the HP screen with bios v3.03 in the lower left corner and a few key options 'f' in bottom right is as long as the system starts.  These 'f' keys do not work when starting.  I have tried 2 sets of start-up/recovery disks - those that I did when the PC was new and the boot disks original HP that I purchased directly from HP just to make sure, I've had good recovery disks but system does not boot from either.  I hear the reel of DVD - Rom to the top, but nothing happens but the above screen.

  He did start once and loading Windows because this problem occurred originally but that locks up and came back to the same screen described below.  Any thoughts on how to go beyond that and load an operating system would be appreciated.  I'm hoping to get my data/pictures/music off the hard drive and install a fresh.

  This would be a hard drive problem?  I had an accident before, but it's hitting / clicking sound.  Not the case hear... and everything seems to work fine for a while when he did start once.  Assuming that it is a hard drive failure, it's that they anyone who can correct/repair hard drives or get the data out of them?  I have some photos of a recent vacation that I have would be cruelly you lose... and of course I had not saved their CD yet.

  Thank you all!

  Wayne.

  I ended up calling technical support and still have a very hard time with the resolution... but it worked.   They had me remove the 4 modules of memory DIMMS and reset them and then restart and it worked.   This PC has worked for 4 years and has not been moved then how the implementation of memory become a problem, I will never understand.  Just thought I'd share the resolution in case some of you have the same problem.  Ironic as that happed even time that the question of the Virus.  Maybe this resets something on the motherboard or release some sort of static charge.  We had turned off the PC and decharged everything using the switch several times before, and it doesn't seem to help.

• I can create "logical drives", but do not have an "extended partition" - listen to me?

  Hello

  It's a no-brainer and I know not often asked the question, but I have not found a satisfactory answer. I use Acronis Disk Director 11 and have never had to worry about "extended partitions. I simply create "logical drives" when I reached the limit on the number of "primary partitions" on my drive. And yet everywhere you look, I find that I need to create the first "extended partition", which is defined as "an extended partition is a container that can contain one or more logical drives." It is the universal definition as every definition I've found the same bed. It's as if everyone uses this definition even without really explaining what an "extended partition" really is. All have made a leap of faith that that's all that needs to be said on the subject, even if not where is it explained what is this "container" and how it is created. Acronis made a reference to an "extended partition" in his glossary (if I remember) and leaves the matter as if it served no more utility. Someone explain to me how this "container" is created and why is it necessary I can create "logical drives" without ever invited to create an "extended partition."?

  I can't wait to finally put this issue to rest,

  Thank you

  Perri 26

  In the past, creating another partition, the other then primary school, said to the user that an extended partition has been created and then immediately in the process of user intervention to create logical drives in the breast of the space newly allocated.  Logical drives ARE essentially the "extended partition" up to a maximum of three in the extended partition on an MBR disk, and this is the limit of three in car that was important to know.

  In some ways, the information given at the time was better because it gave the user a more understanding of the functioning of the system. Nowadays, the vast majority of computer users are not experts and do not know how it works. They just want turn on and go... :-)

• Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

  My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

  Evelyn,

  (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

  (2) then select / click on the Seagate 2 TB of disk.

  (3) then click on the little icon above the list of player who scored "click to run tests.

  (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

  (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

  Now try to install Windows.

  J W Stuart: http://www.pagestart.com

• Satellite Pro A40: Is it possible to format the HARD drive without disk

  I am passing on a Satellite Pro A40 to a brother. It is in very good condition, but has slowed down over the years. I want to get rid of my data (I have on a new machine) and speed up the system by formatting the hard drive.

  The machine didn't come with a disc for Windows XP, or a recovery CD (just a CD "tools and utilities"). I'm sure the drive HARD will be partitioned, and I can format the drive without such a disc.

  If this is true, how should I do?
  Thank you.

  Hello

  I can't believe that you do not have recovery media.
  The laptop must be supplied with recovery CD, Tools & Utilities CD, and WinDVD.

  But back to your question;
  If you insert a new HARD disk, you will need to use the Toshiba Recovery CD or the original CD of Microsoft Windows to install the operating system.
  The new drive is not partitioned HARD and doesn't have any OS pre-installed!

  If you n t have the original CD of Microsoft OS you can contact the service provider allowed in your country and you can order it.

  I hope I could help

  Good bye

• How to connect to another user without password account, with the administrator account in Vista?

  My son will connect to FB, then goes to bed and does not sign off the coast. I log in and the machine is really slow. I am administrator in Windows Vista. Can I disconnect it without password?

  
  * original title - how I as an administrator can connect my son, another user of my computer. I can get her password, but is it a switch, so I can just cut him so my machine is not so slow? *

  Hello

  Unfortunately, we are unable to disconnect another user without password account.

  However, you can restart the computer that would disconnect the other accounts.

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian