Can't export virtual machines: unable to connect to the remote server

Similar Questions

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• invoke VMScript unable to connect to the remote server

  I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.

  On PC1, I can run the script

  invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".

  and it works very well and gives me a result.

  If I run the same command on PC1, I get the error:

  Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server

  on line: 1 char: 1

  + Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript

  Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.

  Thank you!

  The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/

• not be able to collect some Logs Errror: unable to connect to the remote server

  I'm trying to collect Diagnostic information requested of VMWARE and I get an error message

  Error state HOME

  Complete XX.XX.XX.xx

  Complete XX.XX.XX.xx

  YY.yy.yy.yy could not connect to the remote server

  YY.yy.yy.yy could not connect to the remote server

  Bundle of newspaper has not YY.yy.yy.yy has not generated

  VCenter Server full

  VMware Vsphere Client full

  I don't know their reasoning for this, but it seems like a pain in the thigh. Why not just export logs with the vSphere Client? File-> Export-> Export System Logs

  Or

  Use the help wizard that will allow you to collect and automatically download newspapers in vSphere?

  http://www.VMware.com/products/Datacenter-Virtualization/vCenter-support-assistant/overview.html

• A solution to the "unable to connect to the NFS server" that I can't understand

  (This question is related to the interaction between ESXi and FreeNAS and talk a lot here, but the solution was finally on FreeNAS configuration change, so I hope it's ok that I post in this forum.  It relates to the use of FreeNAS of ESXi).

  I have a FreeNAS system set up specifically for the copy of the virtual machines of my ESXi server as a backup mechanism.  I tried to mount a NFS of FreeNAS disk and ran in a (what appears to be, from discussions on the forum, a common place) problem.  ESXi, during an attempt fix the part gave me the "unable to connect to the NFS server" message.  The search in the log files, I could see some more detail, but nothing that pointed to a solution.  I also searched the logs on the FreeNAS system, nothing helps.

  I was using the IP address of the FreeNAS (static address) system instead of the DNS name when you are trying to reach the storage.

  After hours of trying different methods, creation of username on FreeNAS trying up to ESXi, scouring through all the various points of ESXi config, etc. I am getting nowhere.  Then I came across a post somewhere (not here on the forums, but in a blog somewhere) that said add the ESXi server to the hosts on the FreeNAS system file.

  Once we added - bingo-test.  ESXi logged in straight away and I am running.

  Now, I am trying to determine why the addition of ESXi machine to the FreeNAS hosts file would allow ESXi to connect.  Anyone have any ideas?  The IP address of the ESXi system was already in the allowable range set up in the UI on FreeNAS.

  Thanks in advance.

  Mounting NFS export list process requires the resolution of the customer's name. When a customer initiates the request for an NFS share, server checks its list of export for the requested directory and the name of the customer in this access list for this particular action. Now if the server fails to resolve the name of the initiator denies his request for the mounting of this share. In order to overcome this problem, you must have a dns server in the network, or do you have enter you the names and information of IP address to the server hosts file

  Naeem Holy

• I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  Hi johnf49911817,

  * Try the solutions below: -.

  Solution 1) (this error occurs when you have more than 1 process of Acrobat running)

  (1) go to the task by pressing Ctrl + Alt + Del Manager

  (2) go to the process in the Task Manager

  (3) terminate all processes associated with Acrobat

  (4) start Acrobat again.

  Solution 2) open Acrobat access to menu help & repair installation.

  Solution 3) control the association of file on your system.

  Solution 4) course for HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and replace the key 'AcroviewA11' 'AcroviewR11.

  Kind regards

  Christian

• Unable to connect to the host server: a connection attempt failed because

  Hi all

  I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

  I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

  Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

  to answer.  Do you want to retry?

  My ESX server hosts have static IP addresses.

  I've seen a few similar posts on this issue, but their solutions have not worked for me.

  Best regards

  Nathan

  I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

  -KjB

  VMware vExpert

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• Error: Unable to connect to the Converter Server

  I'm doing a P2V conversion of base with the converter for .net SDK; However I'm getting unable to connect to the converter server.  I use the SDK software on the converter server.  Any help would be greatly appreciated.

  my properties file is pretty basic:

  physicalsource.address=192.168.1.32
  physicalsource.username=192.168.1.32\rootcd
  physicalsource.password=**********
  physicalsource.ostype=linux
  physicalsource.agentport=9089
  physicalsource.reboot=false
  vcserver.address=192.168.80.2
  vcserver.username=192.168.80.2\administrator
  vcserver.password=**********
  conversion.job.name=P2VConversionJob1
  conversion.job.description=MyNewVMTest
  conversion.vmtocreate.name=MyNewVM
  conversion.vmtocreate.vcpu=1
  conversion.vmtocreate.memory=4096
  converterserver.address=192.168.80.5
  converterserver.username=192.168.80.5\administrator
  converterserver.password=**********
  

  Here are the results.  And I don't know what else I need included.  I disabled all firewall server at the moment as well to make sure that they weren't getting in the way.

  C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>ConverterSamples.exe cd.p
  roperties
  Caught Exception :  Name : WebException Message : Unable to connect to the remot
  e server Trace :    at System.Net.HttpWebRequest.GetRequestStream(TransportConte
  xt& context)
     at System.Net.HttpWebRequest.GetRequestStream()
     at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodN
  ame, Object[] parameters)
     at ConverterApi.ConverterService.ConverterRetrieveServiceContent(ManagedObjec
  tReference _this)
     at ConverterSamples.ConverterConnection.Connect(String serverUrl, String user
  name, String password) in c:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\Converter
  Connection.cs:line 51
  ERROR: Failed to Connect to Converter Server.
  
  
  C:\_cd\sdk\samples\DotNet\cs\SubmitWinP2VJob\bin\Debug>
  

  You must be able to connect to the computer you run the samples of the converter (192.168.80.5) on port 443 server machine. You can check the following:

  * Converter Server is running

  * There is no firewall is blocking the port 443

  * There is no other application taking port 443 and not allowing not converter tuned (a web server on the same computer?)

  * Converter server is installed in Client-Server mode (by default, it is installed in local mode only and no TCP connections are allowed, but samples SDK only support TCP mode).

• Unable to connect to the DAC server by new repository DAC

  Hello
  
  I created the new repository of CAD on the same machine to perform analysis on the customization of CAD objects. I could connect the former repository with DAC server but with opening new repository DAC, when I click on tools-> DAC Server Management-> server DAC log, I get the error message: unable to connect to the DAC server.
  
  I can see the red icon on client CAD, which suggests that the DAC server connection has not been implemented.
  
  Please help solve the problem.

  Hello

  This issue because of the number of port DAC. For the first deposit you gave port no.: 3141 with that number already server started. When you create the new repository, you must change the server DAC number more than port 1024. Then stop and start the server. It may solve your problem.

  Concerning
  Sundar

• Unable to connect to the Skype server!

  Always write can not connect to the Skype server. just like others. I use version 4.2 without problems, but about 1 week ago can't connect on Skype. Always write this message and try after 2 minutes later. Doesn't work, I try to download the latest version and at the end of installation even message, unable to connect to the Skype server. No problem with our PC

  Interestingly, I can't go to my Skype account with login Skype from my Windows Phone (Nokia Lumia 630).

  Conclusion is any problem with your server and connection PC, dosnt matter version of Skype. Please fix. I hope in a short time. Thank you

  Best regards y):

  

  having exactly the same problem on my Mac when I try to connect it just gives me that a message could not connect to the server. Can go to my ipad, same account etc, but not on the desktop. Anyideas? I tried to download latest version, but that does not help

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• BlackBerry smartphones it says "unable to connect to the requested server" whenever I try

  He continues by saying "unable to connect to the requested server" every time I try t open any website, wi fi is perfectly connected to the phone there is no problem with the wifi, it was working until yesterday, but today I am faced with this prblem, please let me know the solution as soon as possible.

  Hi and welcome to the Forums!

  Can you please clarify? You say that you cannot connect to the server, and then you say that WiFi is perfect. Can say you it was OK until yesterday. So I'm confused about what you are who do... is it via WiFi or via your carrier connection data?

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• Uninitialized encryption algorithm (91); Unable to connect to the LDAP server

  Hello

  I configured a new 'provider' in Weblogic to LDAP server. And restarted the management server.

  When I tried to search for LDAP users in the tab "Users and groups", there was no displayed to users. I checked the logs and found the entrance of error below.

  < SNIP >

  Caused by: netscape.ldap.LDAPException: encryption not initialized (91); Unable to connect to the LDAP server

  to weblogic.security.providers.authentication.LDAPAtnDelegate$ AtnLDAPSSLSocketFactory.makeSocket (LDAPAtnDelegate.java:4647)

  at netscape.ldap.LDAPConnSetupMgr.connectServer (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.openSerial (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.connect (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.openConnection (unknown Source)

  at netscape.ldap.LDAPConnThread.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  to weblogic.security.providers.authentication.LDAPAtnDelegate$ LDAPFactory.newInstance (LDAPAtnDelegate.java:4141)

  at weblogic.security.utils.Pool.newInstance(Pool.java:37)

  at weblogic.security.utils.Pool.getInstance(Pool.java:33)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3487)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3479)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.listUsers(LDAPAtnDelegate.java:2267)

  at weblogic.security.providers.authentication.LDAPAuthenticatorImpl.listUsers(LDAPAuthenticatorImpl.java:178)

  at weblogic.security.providers.authentication.ActiveDirectoryAuthenticatorMBeanImpl.listUsers(ActiveDirectoryAuthenticatorMBeanImpl.java:227)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  < / SNIP >

  Can someone tell me why I get this error.

  Thank you

  Shakeel

  Hello

  Please add - Dweblogic.security.SSL.nojce = true in your startWeblogic.sh script in the section "JAVA_OPTIONS.

  Example: JAVA_OPTIONS = "${JAVA_OPTIONS}-Djavax.net.ssl.trustStore=/u07/oracle/certstore/test_keystore.jks-Dweblogic.security.SSL.nojce=true."

  Please try this.

  Thank you