Can't get my hp 8000n to print on my imac 10.6.8

Similar Questions

• How can I get the software of the printer Canon - MG6170?

  How can I get the software of the printer Canon - MG6170?

  I can't fing it in the Canon Web Site.

  Help, please!

  I can only find it on non-English language Canon websites such as Taiwan and Hong Kong. You may need to use an online translator to find the drivers you need (assuming that they exist for your version of Windows).

• How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  * Original title: install a wireless printer

  How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  Hello pastor,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to set up a wireless printer.

  When you connect a printer to your computer, or add a new printer to your home network, you can usually start printing immediately. Windows supports most printers, and you'll probably go out your way to install the special printer software. If you use Windows 8.1 or 8.1 RT Windows, additional printers and drivers are available through Windows Update.

  I suggest you follow the steps in these articles and check if it helps.
  Reference:
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

  HP printers - installing the printer wireless (Windows)
  http://support.HP.com/RS-en/document/c03278373

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I get my pay stub to print

  How can I get my pay stub to print. I told myself I need to download adobe reader, who have done so, but still cannot print heel

  Hi jerryk97573015,

  Make sure that the drive is installed on your computer Adobe - Adobe Acrobat Reader DC Distribution.

  Make a right click on the link pay Slip & click on "save link as", save it to your desktop & open with Adobe Reader. Go to the menu file-> Print.

  Kind regards

  Nicos

• How can I get the rear HP Smart print icon in the toolbar?

  The HP Smart print icon used to appear in the Firefox toolbar. I had to reload Firefox. the icon no longer appears. How can I get that back? I use Windows 7.

  HP Smart printing (formerly HP Smart Web Printing) is supported only by IE 6 and later and is no longer supported on any other browser -it was a decision made by HP, not Mozilla.

  • See - http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/smartprint (click to enlarge section 12 at the bottom)
  • See - http://h10025.www1.hp.com/ewfrf/wc/document?lc=en & dlc = in & cc = us & docname = c01812475 #N152
  • See - http://h30434.www3.hp.com/t5/Web-Printing-Software/HP-Smart-Web-Printing-and-Firefox/td-p/105151/page/7 (it's the forum discussion HP 15/08/2009 to 28/08/2012; see last comment on page 7, dated 08/28/2012 by user Shirlzz1)

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• How can I get my HP Photosmart 1000 printer to run on Windows 7?

  How can I get Windows 7 to operate my HP photosmart 1000 that were previously running Windows XP?

  Hello

  According to HP here.

  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796774&lc=en&cc=uk&dlc=en ,

  your printer is not supported in Windows 7.

  However, if you browse the HP support forums, you will find that some people have managed using spare HP drivers as a workaround. These are not official methods and cannot work or cause other problems. It would be prudent to back up your data and create a system restore point, if you decide to try.

  Don't forget that the 32-bit drivers cannot be used on 64-bit Windows (and vice versa).

• Can't get USB - IEEE1284 (LPT) adapter/printer installed in Windows 8

  I recently bought a PC in Windows 8.  I have a printer (HP DesignJet 220) with the single port LPT.  I found and installed the printer driver 64 bits for this printer successfully and the printing device (DesignJet 220) shows up in my list of printers.   (Note that I have a HP 1055 all-in-One connected by USB on this machine and it works fine.)

  I bought and installed a USB adapter IEEE 1284 cable and Windows 8 recognizes the adapter (automatically, without having to load a driver).  Problem - when I put the printer port in the window of the printer device to the port of virtual printing USB003, all the instructions I've read - nothing happens.  I tried all USB ports and each port LPT in the list.  Sometimes I print a test page and get an error that the printer's paper (it is not), and sometimes the printer test page is going nowhere - a few stays in the print queue.   The function 'Enable bidirectional Support' is grayed out so I can't activate it (it appears as not controlled).

  The IEEE-1284 device says no printer.  When I try to change the printer driver in the IEEE-1284 device window, he said simply that the driver is up-to-date for the attached device (that he believes is 'none').  The printer is turned on and ready to print.   At any time the printer indicates that it has received all the data (on this model there is a flashing on the control panel when the data is transmitted).

  If I unplug the USB (on the adapter cable) to the computer, it is immediately recognized in the device window and the IEEE-1284 device is removed in the devices window.  If I leave the USB plug in and unplug the Centronics connector at the printer, nothing happens.

  How to make the printing device to connect to the USB port of the virtual printer?  On the other hand, is the problem in the IEEE-1284 device and how to recognize the printer?

  The problem is not the driver.  The problem is the interface.  Eight doesn't seem to work with most LPT drivers.  I tried two so far.  In addition, these interfaces are so old that most manufacturers ceased to provide drivers after Vista.  I tried an interface card (no luck) then a converter USB to LPT.  Eight did not recognize either.  I think the more specific question is if windows 8 supports parallel interfaces.

• How can I get my HP 7310 to print completely wireless (w/out Ethernet cable)?

  I managed to install my HP 7310 printer to my router wireless using an Ethernet cable.  However, I'd rather have my printer HP 7310 connected to my network completely wireless, i.e. without the need for a long cable to my printer connected to the wireless router.  Is this possible?  If so, what can / should do to set up the printer this way?

  Hello

  Your printer doesn't have a wireless card so you must connect the cable to the router / access point. You can also add a wireless for your printer print server (cost over $$) like this:

  http://compnetworking.about.com/od/wireless/SS/wirelessgear_4.htm

  Kind regards.

  PS, the above print server is for example only, please do NOT buy it, it is a bit of waste.

• Where can I get a driver for Epson scanning for my iMac os 10.11.3

  I have an iMac with the current version of El Capitan 10.11.3. I bought an Epson Stylus pro printer (WF-5690). I downloaded and installed the driver scanner of Epson Web site and the error message indicates that the computer does not Scan of WSD. How can I get on my iMac. I couldn't find Capture of Image or the other. The printer and the computer are on the same connection network wi - fi. What can I do to get the scan function to work with my Mac? I appreciate any help anyone can give me.

  Sincerely,

  leonorafromarcadia

  WSD is not available for OS X. WSD stands for 'Windows Vista Web Services on devices (WSD)'

  Image capture is in your Applications folder. I have an Epson WF-3620 and it works perfectly with the Image Capture and El Capitan 10.11.4.

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• How can I get rid of lunaticake?  I have an iMac w/Mavericks.

  How can I get rid of lunaticake?  It must have maliciously charged when I downloaded an update of Silverlight.

  It is an extension. For Safari, Safari/Preferences/Extensions and delete.

  Open Google Chrome and select Preferences from the menu. Then, click on the Extensions link located on the left side of the window. Once the list appears, select Lunaticake, and then uninstall it from the browser.

  Open Mozilla Firefox and select Add-ons from the Tools menu. Discover Lunaticake of Extensions and Plugins and delete if it is present.

  Once removed, restart the browser.

• How can I get my USB to the printer wirelessly to a network without a computer?

  If you have a USB port to the wireless printer and no computer to use software to do this and do not want to use the WPS option (or it is not available), then the following method can help.

  That doesn't get a key USB Wi - Fi, as the printer Deskjet 3512, on the wireless network when there is no computer available.  However, this can work from a computer as well if you prefer not to install the software.

  For these steps, I'll use an iPad.

  1. the printer will broadcast a wireless network of its own.  This has usually HP Setup and model of the printer in the name of the network.  Connect a wireless device to the network.

  2. Once connected, open the browser.  In my case, it's Safari.

  3. Enter the 192.168.223.1 address in the address and press go to access the status of the printer page.

  4. once there, there will be several tabs at the top.  Select network.

  5. Select the wireless configuration wizard.

  6 Select next at the bottom.

  7. it looks for available networks.  Select your network from the list and click Next.  The network should be highlighted, select it again if it's not.

  8. you will be asked the password.  Enter the password and click Next at the bottom.

  9. the printer should now be connected to the network.  It may take a few minutes to share.  Reconnect the computer or mobile device to your regular network and it should be good to go.

  I know that there are some users who have only a Tablet and a USB port to the printer wireless with no other way to get it on a network.

  I hope this information is useful to someone.

• I can't get the driver for my printer canon 4150 MF, help!

  I bought a new computer and the Canon MF 4150 printer driver is not in the computer and I tried to download it and can't make it work. Do you know how I can get my printer to work?

  Hello

  I suggest you download the driver fron the following link and install it on your computer...

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf4150#DriversAndSoftware

  If you need help, I suggest you to the manufacturer of the printer.

  You can also refer to:

  Find and install printer drivers in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Install a printer.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• How can I get rid of the Red print?

  When I try to type an e-mail to send is in red. Why? And how do I get rid of this

  If you want to say why some of the email addresses you enter in an address field are red, it means that they are not in your address book. This is a warning only and will not stop the email out if it's a good address. There is a bug in some versions that cause even if the address is in one of your books.

  If you really want to say things that you type are red when printing, I don't know.