LaserJet 1536 dnf: failure scanner laserjet 1536 dnf

Similar Questions

• CM6040f MFP: Failure scanner error CM6040f 30.01.08

  Make failure scanner error 30.01.08

  "Can anyone show a picture or describe where the scanner" locking "is?

  Aparantly I need to ensure than that in the "unlocked" position

  Thank you

  Look under the scanner and adf table-

• LaserJet 3015: Failure scanner Laserjet 3015

  I have an older 3015 AIO who just started giving me a problem scanner.  Half of a scanned page scans black vertically.  Machine will print very well.   I found a "calibration curve" diagnosis and I tried the Red layer, I get a nice curve of the drops which then either nothing or infinite, can't tell which.

  Is this a symptom of a scanner unit failure?  Or should I look to connections, motor, or memory?  I want to have the right part on hand if possible when I take the thing out, because it seems that it is not easy to the maintenance manual.

  Other diagnoses that might help things pin down?

  Thank you!

  So, just to close this topic, he did turn out to be a failure of scan.  My theory is that the scanner is illuminated by LEDs on both sides of the page, and a Bank has failed.  The part number for this printer was RM1-0927, I got by taking it apart.

  Half an hour or so and a donor parts printer that spit its own version of work, and I'm back in business.

• Officejet HP6700: HP6700 Scanner failure: unable to scan, copy or fax

  This morning my 6700 Officejet come with failure scanner error message on his screen and refused to do anything.

  I tried the method on the suport online - remove the power cable when he was conducting and the checking of the firmware, but no joy.

  It happened that we had bought an another identical Officejet a couple of years, so I plugged that is placed. Everything was fine and I printed a document, but now this evening, this one has the same error message. I tried the solution again and checked that the drivers are up-to-date (which they are) but not joy.

  Help! (please)

  Nothing has changed on our Setup - BT wireless broadband, computer Pavilion 23.

  Hello

  Please try the steps below...

  While the printer turned on, unplug the power cord from the back of the printer. Wait 60 seconds. Plug the power cord printer directly to a wall jack (bypass surge / power strip) and then to the printer.

  Open the scanner cover, and then press black COPY. Check if the scan transport moves and it's on. Transport scan is not turned on or move in all, then its time to replace the printer.

  Call the HP Technical Support for assistance. 1-800-474-6836 (USA)

• Failure to scan on a brand-new 8620 OfficeJet Pro

  Hello

  I have a brand new 8620 Officejet Pro and use OS X v10.9 & use a laptop wireless and desktop via USB.

  On both final set-up print without any problem at all but when I try to copy, scan or something by fax printers touch screen comes up with "Scanner failure - cannot copy, scan, or use the fax". As a result, if I open the HP utility it says "device status: scan unknown error".

  I've uninstalled and reinstalled all software printer 4 times - twice by using the internet and twice using set up disk & each time the same result as above.

  I used the online help guide and followed all the solutions, but all without success.

  Anyone can offer any additional help please or is their real fault with it & the printer needs to be replaced

  Thank you very much

  Welcome to the @Stratford_HP forums

  I read about how your new Officejet 8620 shows you a failure "Scanner", leaving you unable to copy, fax and scan. I'm here to offer my suggestion and comments for this question.

  Try the steps in this guide for failures to scan first, and if the problem is still apparent, I suggest to call HP to inquire about a replacement printer.

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a fantastic weekend, I hope that my post was information!

• How to tell if your Scanner is not

  A Scanner failure occurs when the scan components to address a problem. These problems can be caused by several problems, the two main internal/external electrical malfunctions or scanner bulb problems.

  Often the errors may differ on your product. You can have a scanner failure if you see one of the symptoms of follow-up or errors:

  • "Power off and on" the printer or "failure scanner power market.
  • "Scanner system failure.
  • "Can not make copies or fax" or "unable to scan, copy or send a fax.
  • "Scanner failure, power cycle.
  • Scans and copies to produce a document all black.
  • Scans and copies produce vertical lines.

  Sometimes, the problem cannot be solved with troubleshooting and must be repaired, at other times, you can solve the problem by troubleshooting documentation or following.

  1. Make sure you have the latest firmware installed. This can be done from the front panel of the printer on some models or is available on the pages for the product HP customer service. HP customer service
  2. When scanning/copying lift the lid of the printer a bit and look to see if the scanner light is on. If it is not the bulb may need to be replaced.
  3. Make sure that the printer is plugged directly into an electrical outlet, not a surge protector. Surge protectors can sometimes prevent a sufficient current to reach the printer and can cause problems with the digitization of parts requiring more electricity. If it is already plugged into a power outlet, it is sometimes best to test the printer in another room that uses a different circuit. It allows to isolate the problem to a faulty plug incase.

  According to the error or problem, you will need to try different items of troubleshooting or steps:

  1. Troubleshooting failure of scanner messages, you want to follow the printer reset as described in the article: a 'Scanner failure' message on the all-in-one control panel and you can not scan, copy or f...
  1. To solve the problems of quality of scan such pages black or vertical lines follow the steps in one of the articles below. Select the series of the printer that you have for the appropriate troubleshooting steps:
  2. • Vertical stripes, lines or streaks on Copies, faxes or scan (Officejets)
     • Vertical stripes, lines or streaks on Copies, faxes or scan (PCS)
     • Vertical stripes, lines or streaks in the Copies or Scans (Deskjets)
     • Photosmart printers vary in instructions. For the best article if you have a photosmart using HP customer care to locate the support page for your printer model. Then go to solve a problem. After you select scan and search for the article on the vertical stripes, lines or streaks in the Copies, faxes or Scans.
  3. Other things to try would be if the problem occurs when both color copy or black & white copies.

  If the problem persists after all the troubleshooting the chances are that the problem is a hardware problem with the scanner. At this point I suggest you contact HP on the maintenance of the printer to 800-474-6836. You can use the tools below to check your warranty and see the out of warranty repair options.

  Product HP warranty check tool

  HP out of warranty of the Support Options for HP select consumer printers *.

  If someone wants to ask me questions or continue troubleshooting of your possible failure message scanner just post them below and I'll be happy to help you.

  Be sure to post your printer model, operating system, and how your computer is connected to the printer.

• Failure to scan HP CLJ CM4730 MFP 30.01.34

  I have one of these with failure scanner error 30.01.34 as well as some mistakes of fan... 57.03 57.06 57.7. One of our IT guys replaced the trainer and the LVPS. No help. The 30.01.34 error does not appear in the maintenance manual, but it seems that the only thing in common with errors is the DC controller... Engine test button does nothing, the device does not print. Anyone got any suggestions? (other that pass on to the next guy)

  At the time current diagnoses is not possible, so if I had thoughts that I would at least try spec it.

  Remove the cartridges, belt, trainer, fuser, also remove the connection to the Scanner and ADF so I got just the print engine.

  See if I get any sign of life to the power upward, if you are fans of spin for example then you have the DC controller is probably working signs.

  If not then at least I know that I would be on the base engine failures and would probably be cut as much as possible see what I can do to make it live.

  The reason to take the fuser out, the LVPS will continue to fuel the fuser so if she has a defect, it could cause low voltage to trigger.

  I would watch just for the spark of life that says he could be alive then work outward.

• HP Officejet 4500 G510n: Failure to scan

  Have tried to solve my printer with the steps provided with nothing doesn't. To print from my computer. I have a Wi - Fi connection, and up until a week ago I had no problem. the last printed copies are out all black. I have replaced the cables of electrical connection and have tried the troubleshooting steps, but still get the same error message scanner! I'm not sure of my product warranty, but it could really use the help of an expert at this point!

  Thanks in advance

  Hello! Welcome to the @lduffy forums

  I read about the "Failure of Scanner" message you tried to work through lately, and I wanted to answer you with the troubleshooting steps to try for that matter.

  If troubleshooting does not resolve the failure scanner, the scanner could fail, and you may need to replace the printer or another printer for scanning and return copy features. Do not hesitate to contact HP to determine if your printer options.

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!

• Autofeed of the margins to scan to HP Laserjet 1536 dnf MFP

  Hello

  I have a HP LaserJet 1536 dnf MFP and have problems with the scanner of the automatic feeding system. Papers, I'm trying to make copies to make use of all the 8½ "x 11" "on paper and when they are copied are cut by about ¼" anywhere in the document. " Y at - it an option to make the paper to scan the whole 8½ "x 11" Manger? " Currently, my only solution is to reduce 88% printing, which produces a low police on the copies. Any help would be appreciated.

  Operating system: Windows 7 64-bit

  Thank you

  Invigilium

  I found the solution: buy something else.

• Windows 7 starter edition does not recognize HP LaserJet 1536 dnf printer

  I use the Acer Aspire one 521 netbook with pre-installed windows 7 starter (it was bought with Win 7 starter). I have the HP LaserJet 1536dnf printer. I install, it worked well, but every time that I unplug the usb cable from my netbook and plug it in again, windows does not recognize the printer (but oddly enough, regognizes the scanner). So is it possible that I should not install/uninstall the printer each time I plug/unplug the printer?

  Hello

  1. What is the exact error message you get?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  Run the tool material and devices and check to see if that fixes the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I also suggest to go through the steps from the link provided and check.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this helps and keep us posted.

• LaserJet Pro 1536 MFP dnf: dnf 1536 Pro LaserJet MFP Installation time on

  I am trying to install this printer on another laptop (windows 7).  I tried to install via the DVD provided, and installation "timed" out, with a fatal error.  I went to the HP site and downloaded in the installation software and tried to install the - same thing.

  I installed successfully on a Windows XP laptop, but I take that out of service and wanted to install it on this laptop instead.

  On the XP laptop, after installation, there are SCAN and other icons on my desktop that I could use to access these features.  I need these features desperately.

  Can anyone help?

  Hello

  Who is likely to be linked to the issue.

  Try following these steps and check any changes:

  1. disconnect the USB from the printer.

  2A. open computer and navigate to the C drive, look for a folder named as base HP Laserjet M1530 software and open it.
  If there is no folder such go to step 2b below.

  2B. Type folder in the top address bar and press on enter, locate and open the last installation HP fodler that begins

  with the characters of 7z.
  Note: If there are several files that starts with 7z opens that last updated the.

  2. click on Uninstall.exe and follow the steps, restart your PC if necessary.

  3. open devices and printers, and remove any reminder of the printer or any other HP printer, you can see (e.g. HP

  Universal print) by right clicking the icon and selecting delete device.

  4. left click any existing (e.g., Fax) printer, and then click Properties in the print server on the top bar.

  5. open the driver tab and remove any existing HP printer, be sure to select the option 2 removal of the device and its

  software.

  6. download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-86005-4&cc=us&DLC=en&LC=en&OS=4062&product=3974279&sw_lang=

  7. follow the installation by selecting USB, once be prompt to plug the USB connect, and then click the installation

  Software hardware device on the system tray (it will include a green icon of spinning, it can be hidden and you need to click the arrow to spend it):
        

  8. If the search for installation from Windows Update do not forget to click on the link below to go to Windows Update and to ensure

  that all instances of the device are marked with a green check mark as success.

  Allow the installation to complete and check for the difference.

  Please let me know additional questions,

  Shlomi

• WebServices on my Laserjet 1536 dnf printer still can not be activated

  Hello

  I'll be back with the same question about web services. Still not working for some time.

  Operating system: 32-bit Win7

  Last update of firmware (2014-03-05, Version20140123, 8.66 M)

  Latest software HP ePrint software 2013-12-18, Version4.6.60.12747, 56,57 M

  Manual IP: 192.168.1.200

  NPS: 255.255.255.0

  Gateway: 192.168.1.1

  (My ISP) DNS:

  193.231.100.130

  193.231.100.134

  I also try without result

  0.0.0.0

  8.8.8.8

  8.8.4.4

  I COULD print/scanning within the local network

  I COULD surf the internet from the local network

  I did all the possible combinations of STOP

  I close all the protections of firewall (Kaspersky KISMD14)

  I have reset the printer in any way possible (...) < and=""> key)

  Nothing seems to work.

  What is strange is the fact that the printer use to work on the same network, by the same ISP, same model of router (ZyXel), with none of the additional parameters.

  If someone could help I would be much obliged.

  Thanks a lot for your time,.

  Yours,

  Claudiu

  Hi claudiopolis,.

  I see that you have some problems with the activation of the web services.
  I will do my best to help you with this problem.

  As he was working previously, I think he might have an auto update on router.

  Disable IPv6 on the printer to see if that is causing the problems.

  Click the Configuration button (key) network configuration, IPv6, network services and turn it off.

  Try to enable web services again.

  If you still have questions then I restore the default values for the printer and try the installation again.

  Unplug the Ethernet cable from the printer.

  Go to the setup button (key) service, restore the default values.

  Print the configuration page to find out the IP address.

  Print a Configuration report.

  Select the method.

  Access the webserver integrated for the printer again and try to activate web services.

  If that does not work then go to the manual select tab, IPv4, network layout, enter the settings disable configuration report. (do not create a new IP address) address preferred DNS: 8.8.8.8 and other DNS address: 8.8.4.4.

  Apply the settings and return to the Web Services tab and try to activate again.

  Here is a list of printer ports: 137/138/139/161/427/9100/9220/9500.

  Ports scanner: 9220, 9500/427.

  I would like to know how it goes for you!

  Thanks for posting on the HP Forums.
  Have a great day.

• Photosmart B110c 'Now print alignment page' appears to never.

  Issues related to the:

  How to exit display forever now 'print alignment page?

  How to solve the problem of failure Scanner?

  1. I changed the print head,

  2. I replaced the black ink with authentic cartridge, the yellow ink with compatible cartridge.

  3. After power off, Power ON, appears on the printer: failure of the Scanner, then alignment recommendation and finally 'now print alignment page' and appears to never.

  4. the Solution Center on the computer displays the image below.

  

  5. from printer Toolbox (in the settings): I could not align the print head, because the failure of scan.

  6. After you clean the print heads and print a Diagnostic Page, I printed the following attachments despite the printer on the SCREEN continues to display the text "now print alignment page":

  

  

  

  7. in spite of the yellow ink level is OK, the yellow is not printed on the page_2 attachment hardware of the printer.

  

  Please advise to fix the unit.

  Hello

  HP has no guarantee that 3rd party supplies will work in our printers. Looking at the Diagnostics pages it seems that you are not printing cyan or yellow. There are steps you can take to try to retrieve not being able to print individual colors. Please see this link:

  http://support.HP.com/us-en/document/c02045945

  If you cannot print all colors, you run into a problem to scan the alignment page. I think that the question of printing color must be cleared before attempting to align again. How to perform an alignment, please visit this link: http://support.hp.com/us-en/document/c02045945

• HP Jet 1536 dnf MFP Lasere: 1536dnf MFP Scanner not installed

  Demand scanner my printer has stopped working about 4 months ago. I use Windows 7 and since then uninstalled the driver printer everything and removed the printer and re downloaded the driver full features. I tried to install the driver several times, but failed every time. I was able to reconnect to the printer, but has never been able to download a driver for the scanner and the application successfully.

  Whenever I tried to install the driver the message shown below to me.

  

  Hey @babantoad,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with installing the drivers for your printer Laserjet M1536dnf range on your Windows 7 PC. I can help you with that.

  To install the software:

  1. Click Start, in the search bar type "cmd" without the quotes, and open the command prompt.
  2. In this type of window in "msiconfig /Unregister" (without the quotes) and press ENTER.
  3. Type "msiconfig/regserver" (without the quotes) and press ENTER.
  4. Click Start, in the search bar type "msconfig" (without the quotes) and press ENTER.
  5. Click the Services tab.
  6. Click Hide all Microsoft Services.
  7. Click Disable all.
  8. Click the Startup tab.
  9. Click Disable all.
  10. Click Ok and reboot your PC.

  At this point, you should be able to run the Setup program. If you are unable to run the installer, there is a problem with your operating system. Your next options would be:

  • Run the Microsoft Fix It.
  • Contact who is provided with the PC.
  • Contact Microsoft directly.

  Please let me know the results after following the above. If you are able to install the software, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I'm cann't print my printer LaserJet 1536 dbf MFP by Tcp/IP

  I installed the new printer laserjet (dnf MFP HP LaserJet 1536) with driver when I download from the HP Web (Full Version).

  When the driver installation is finished I have connected answer my printer with the mode of manual configuration of networking (TCP/IP)

  After that I already finished move to test the scan with flat screen, charger charge, fax / output, but cannot print

  but I use the USB cable to connect my printer could print

  Question: how to configure the printer to print with TCP/TP

  Hello MoUOun,

  Welcome to the HP Forums!

  I understand that you are unable to print using the Laserjet MFP 1536. I will do my best to help you! First, what is your operating system on your computer? Windows or Mac?

  I recommend you to download the print and scan doctor, to check if this utility corrects why you are unable to print. (It is only for a Windows computer.) Please post the results on this post, if this fix anything.

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the HP printer will not print make sure that the printer port is correct, which is shown on this document.

  Please post your results, I will be looking forward to hear from your part, have a great day!