How can I get my pay stub to print

Similar Questions

• How can I get the software of the printer Canon - MG6170?

  How can I get the software of the printer Canon - MG6170?

  I can't fing it in the Canon Web Site.

  Help, please!

  I can only find it on non-English language Canon websites such as Taiwan and Hong Kong. You may need to use an online translator to find the drivers you need (assuming that they exist for your version of Windows).

• How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  * Original title: install a wireless printer

  How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  Hello pastor,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to set up a wireless printer.

  When you connect a printer to your computer, or add a new printer to your home network, you can usually start printing immediately. Windows supports most printers, and you'll probably go out your way to install the special printer software. If you use Windows 8.1 or 8.1 RT Windows, additional printers and drivers are available through Windows Update.

  I suggest you follow the steps in these articles and check if it helps.
  Reference:
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

  HP printers - installing the printer wireless (Windows)
  http://support.HP.com/RS-en/document/c03278373

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I get the rear HP Smart print icon in the toolbar?

  The HP Smart print icon used to appear in the Firefox toolbar. I had to reload Firefox. the icon no longer appears. How can I get that back? I use Windows 7.

  HP Smart printing (formerly HP Smart Web Printing) is supported only by IE 6 and later and is no longer supported on any other browser -it was a decision made by HP, not Mozilla.

  • See - http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/smartprint (click to enlarge section 12 at the bottom)
  • See - http://h10025.www1.hp.com/ewfrf/wc/document?lc=en & dlc = in & cc = us & docname = c01812475 #N152
  • See - http://h30434.www3.hp.com/t5/Web-Printing-Software/HP-Smart-Web-Printing-and-Firefox/td-p/105151/page/7 (it's the forum discussion HP 15/08/2009 to 28/08/2012; see last comment on page 7, dated 08/28/2012 by user Shirlzz1)

• How can I get my HP Photosmart 1000 printer to run on Windows 7?

  How can I get Windows 7 to operate my HP photosmart 1000 that were previously running Windows XP?

  Hello

  According to HP here.

  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796774&lc=en&cc=uk&dlc=en ,

  your printer is not supported in Windows 7.

  However, if you browse the HP support forums, you will find that some people have managed using spare HP drivers as a workaround. These are not official methods and cannot work or cause other problems. It would be prudent to back up your data and create a system restore point, if you decide to try.

  Don't forget that the 32-bit drivers cannot be used on 64-bit Windows (and vice versa).

• How can I get rid of the Red print?

  When I try to type an e-mail to send is in red. Why? And how do I get rid of this

  If you want to say why some of the email addresses you enter in an address field are red, it means that they are not in your address book. This is a warning only and will not stop the email out if it's a good address. There is a bug in some versions that cause even if the address is in one of your books.

  If you really want to say things that you type are red when printing, I don't know.

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• How can I get the colors of the printer to match the screen colors code in Dw?

  Print my printer code does not correspond to the colors of code that I use in Dw. How can I fix it? Ron, thank you!

  By default, Dreamweaver code for the printer color is identical to the screen. See the following topics

  

• How can I get my HP 7310 to print completely wireless (w/out Ethernet cable)?

  I managed to install my HP 7310 printer to my router wireless using an Ethernet cable.  However, I'd rather have my printer HP 7310 connected to my network completely wireless, i.e. without the need for a long cable to my printer connected to the wireless router.  Is this possible?  If so, what can / should do to set up the printer this way?

  Hello

  Your printer doesn't have a wireless card so you must connect the cable to the router / access point. You can also add a wireless for your printer print server (cost over $$) like this:

  http://compnetworking.about.com/od/wireless/SS/wirelessgear_4.htm

  Kind regards.

  PS, the above print server is for example only, please do NOT buy it, it is a bit of waste.

• How can I get cyam and magenta to print on a printer-C410a? New cartridges - twice now - unprinted

  I bought a brand new HP 564XL cyam and magenta cartridges for my C410a.  I replaced the "old" who ran out of ink.  But I have no color band on any of the print outs (not at all).  I check vents, I aligned the cartridges, cleaned, everything.  So far - nothing at all for the bars red or blue on these test pages available on the printer.  Any ideas on how to solve this problem?  This has happened today with two sets of nine cartridges (by the way, yellow, black and photo cartridges all worked very well).

  If you have followed all the steps listed here in this document , with the exception of replace the printhead, I'd be beside a manual cleaning of the print head to ensure that the build was not the cause of the issue of quality output. Instructions to perform a manual cleanup can be found on pages 223-227 of the user manual. After we finished the manual cleaning of the print head, I would then again run the automatic print head cleaning utility from the Toolbox or the façade. If the utility is proposing to achieve a level intermediate and advanced cleaning, be sure to complete all the levels proposed. I hope this helps.

• New router = the name of the new network, how can I get my wireless Dell 966 printer to recognize the new network?

  I got everything set up on my new network, but have not been able to set up my Dell 966 Wireless printer.  It worked fine with the old router.  The name of the network on the printer is still my old network name, not a new one.  I can't find the printer when I search for wireless.  Printer sharing is on, and the port is set for the printer.  I have reset the desktop computer and the printer.  I checked and double checked all connections.     9

  + The wireless set up the menu of the printer is the former name of network, and I don't know how to put the new name in.  It is grayed out so I can't select it.  I don't find a way to do it either from the office.  Any suggestions?

  Hello

  Configure the printer with a static IP address to connect directly to the router (read the manual).

  Next, configure the computers on the network to print to the static IP address.

  The network name or the name of the router would be important.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How can I get my USB to the printer wirelessly to a network without a computer?

  If you have a USB port to the wireless printer and no computer to use software to do this and do not want to use the WPS option (or it is not available), then the following method can help.

  That doesn't get a key USB Wi - Fi, as the printer Deskjet 3512, on the wireless network when there is no computer available.  However, this can work from a computer as well if you prefer not to install the software.

  For these steps, I'll use an iPad.

  1. the printer will broadcast a wireless network of its own.  This has usually HP Setup and model of the printer in the name of the network.  Connect a wireless device to the network.

  2. Once connected, open the browser.  In my case, it's Safari.

  3. Enter the 192.168.223.1 address in the address and press go to access the status of the printer page.

  4. once there, there will be several tabs at the top.  Select network.

  5. Select the wireless configuration wizard.

  6 Select next at the bottom.

  7. it looks for available networks.  Select your network from the list and click Next.  The network should be highlighted, select it again if it's not.

  8. you will be asked the password.  Enter the password and click Next at the bottom.

  9. the printer should now be connected to the network.  It may take a few minutes to share.  Reconnect the computer or mobile device to your regular network and it should be good to go.

  I know that there are some users who have only a Tablet and a USB port to the printer wireless with no other way to get it on a network.

  I hope this information is useful to someone.

• How can I get my HP Deskjet f2200 printer work for Windows 7.

  I recently had to buy a new PC, but my HP Deskjet f2200 printer does not work for Windows 7. He said that it is only compatible with Windows 2000, XP and Vista. I think I need to download a driver but which. Also, how do these things? Can someone help me please? Thank you.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HOW can I GET MY HP 1010 LASERJET PRINTER to WORK ON MY NEW HP PAVILION LAPTOP g7?

  MY NEW LAPTOP IS A PAVILION g7 - 1151SA AND the WINDOWS 7 OPERATING SYSTEM.  PRINER IS A HP LASERJET 1010, MODEL NUMBER IS 460 Q2.  I USED THE INSTALLATION DISK ORIGINAL THAT CAME WITH THE PRINTER, BUT YOU GET THE ERROR MESSAGE SAYING THAT "THE GENERIC IEEEE 1284.4 IS OBSOLETE.  WHEN I HE REQUEST TO UPDATE, HE'S BASICALLY SAYING "THE DRIVER IS UP-TO-DATE.  BUT IT STILL DOES NOT WORK.

  The PRINTER has BEEN PREVIOUSLYCONNECTED at A PAVILION dv7 RUNNING WINDOWS VISTA.

  PETA,

  This is a user to user forum, so please keep in mind that I watched this for you.

  There is no kind of say that way. The HP1010 won't be supported under WIN7: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02535920

• How can I get my image reverse transfer printing

  How to invert my picture to print a t-shirt transfer

  How to invert my picture to print a t-shirt transfer

  ======================================================
  Open the photo in Paint (start / all programs / Accessories / Paint) and go to...
  Image / Flip rotation / Flip Horizontal / OK.

  So... to... File / save as... Enter a backup location and a new name / Save.