Can't go forward or backward in the chapters of the audiobook, after Firmware upgrade

Similar Questions

• Cannot access the WAP54G after firmware upgrade

  I have updated the firmware of my WAP54G v.2; We just started to use the AP again and when I checked, I thought I would update. I was going to 1.2 or 1.4 to the latest firmware using this link http://homesupport.cisco.com/en-us/wireless/lbc/WAP54G, version 2. I could see the AP before starting my Dlink router. I downloaded the firmware and the upgrade of the access point. She completed successfully, but when I tried it I could reach him is no longer. I checked the router and it shows is no longer there and I can't access it via the installer.

  How you try to access the router configuration page? If the access point is connected to your d-link router, make sure that your router's default ip address and AP are in the same range. The IP default WAP54G is 192.168.1.245.

  If the router's default IP address is different, so you will need the AP wired to your computer and assign a static ip address to your computer ie: 192.168.1.10 and then connect to the access point configuration page and settings wireless entry and change the default IP of AP, which is of the order of your d-link router.

• Sliding to organize diapers "forward and backward" in the timeline?

  I'm puzzled as to why you can't move layers up and down on the timeline to arrange "forward and backward". I can click on the submenu to move from front to back. Do you want to add one?

  I had this same problem. Make sure that you drag in the ASSETS Panel and not the timeline. It is redundant and a bit confusing if you're used to working in AE or Flash.

• How can I write a query to siolate the value after the decimal point

  This query

   
  select 
  spraddr_pidm,
  SPRADDR_CITY
   from spraddr 
  where 
   SPRADDR_NATN_CODE = 'CA'
  and SPRADDR_ATYP_CODE = 'AH'

  Returns the following output (just an example I like 1,000 records that I need to fix)
  

  140804     Toronto, Ontario
  140832     Quebec, Quebec
  140845     Halifax, NS
  140889     Mississauga, Ontario
  140902     Boucherville, Quebec
  140945     Westmount, Quebec
  136971     Montreal, Quebec
  180650     Granby, Quebec
  137007     Quispamsis, NB
  137037     Varennes, Quebec
  180746     Port Williams, NS

  As you can see that providence is inserted into the column city (SPRADDR_CITY)
  
  I want to break the column and isolated from providence, so I can insert into a custom table
  the city and providence, so I can fix the files...
  I guess the question is how do I write a query to isolate the providence...
  Thank you

  Hello

  Here's one way:

  WITH     got_comma_pos     AS
  (
       SELECT     spraddr_pidm
       ,     spraddr_city
       ,     INSTR ( spraddr_city || ','
                  , ','
                  )          AS comma_pos
       FROM     spraddr
       WHERE     spraddr_natn_code     = 'CA'
       AND     spraddr_atyp_code     = 'AH'
  )
  SELECT  spraddr_pidm
  ,     SUBSTR (spraddr_city, 1, comma_pos - 1)          AS city
  ,     LTRIM (SUBSTR (spraddr_city, 1 + comma_pos))     AS province
  FROM      got_comma_pos
  ;
  

  What do you do if there is no comma in spraddr_city? The above query assumes that the entire string is the name of the city in this case and the province with a NULL value.

  You can also use regular expressions, but this way is more effective and about as simple to code.

• Help! Restoration of the system after Vista Upgrade.

  Hello

  My name is Jhin and I have a HP Pavilion a6535c PC, with Windows Vista Home Premium Edition(x64). I've recently upgraded to Vista Ultimate (x 64) because of the additional language support. I really did not think it would affect something, because I would still use the same operating system.

  The first day of upgrade, everything was fine; However, I started to have problems the next day.

  For example, my CD/DVD drive has stopped working. I couldn't even find it in my computer. and when I looked in the Device Manager it says that the driver is corrupted or missing. To fix this, I went to regedit and delete the filters of upper/lower case and the player appeared on my computer. The drive will now appear in my computer, but it does not work properly. He reads all the disks and it keeps saying "Insert disc" and ejects anything I put in.

  I found the upgrade comes into conflict with the existing drivers, I had, that's why I tried to run the HP system restore. To my surprise, the F11 does not work.

  I went into my computer and saw that I still have the "FACTORY_IMAGE (D". ")" It's the same as it used to be, before the upgrade to Vista, ~9.77GB of used space.

  Fortunately, I did HP recovery DVD before the upgrade to Vista, but with the CD/DVD drive not working do not, I don't know what I can do.

  How can I check the integrity of D:? Is it possible for me to see if the D: is corrupt? If so, is there a way to find and resurrect the missing partition?

  I appreciate your time.

  Thank you
  JHIN

  Because you can't do a recovery without a DVD/CD player I would say you contact the warranty support and ask for a new DVD player.

  You have a friend who wants to lend you the use of its external CD/DVD drive? This is another possible option.

  You're well enough between the hammer and the Anvil because the option to perform the recovery of the position of recovery at this stage is not possible.

• After I installed 2 Plugins Verb I can't find their version of Adobe first Pro CC 2015 - installed after 2015 upgrade

  Hello..

  I allowing to CC 2015 - Premier Pro and once installed 2 plugins of Word, but I can't find any them where in the first Pro program

  They are not under the effects...

  They are in Verberate of Acon Digital and verb SPL...

  Can someone help me to find and start the 2 plugins and then I can allow them with license files I etc.

  Thank you

  Thane Thomas

  [email protected]

  do they show that the available vst plug-ins and are activated?

  

  

• Where is the legendary After Effects upgrade? That is actually worth paying for!

  Hate to say I told you so... For months we have been promised this legendary upgrade to After Effects, the version that will finally get rid of all issues well documented on a mac... I said would happen... It's just nothing!

  He arrived in March... No, wait, may... It's ok we will suspend your subscription until it works! Guess I'll cancel membership CC then.

  Well summer is here and guess what, no upgrade and another 4 months have passed with After Effects still does not work!

  The update of the corrections after effects CC 2015 (13.5.1) is available. It fixes a lot of problems with insights, including the audio delay mentioned here.

  Http://adobe.ly/1Il5JYe details

• Time required for reconnection to the host after vc upgraded

  Hello, vSphere Upgrade Guide says (page 43) on vc migration-related service interruptions

  VMware believes that the upgrade requires vCenter Server out of production for 10 minutes, more

  15 to 20 minutes for the upgrade of the database schema, depending on the size of the database. This estimate

  does not host reconnection after the update.

  Anyone know the time required by the reconnection of the host after Virtual Center upgraded (by experience, even with migartion to vc 2.x)?

  2-5 minutes if vCenter service started

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How can I move my favorites back on the left after the synchronization?

  Hello
  I had to get a new laptop and I synced my old Mozilla to this new laptop settings.
  It sync a lot of stuff. However, on this new laptop bookmarks etc are all towards the top right of the
  screen, but I really need to be on the left, as if it were before.
  Is there a way to move across my left?
  I saw 1 other person asked this question, but I did not understand the answer.
  The old lap top says it's Mozilla 34.0.5
  This news was the last download.
  I wonder if this is the reason why the settings have moved to the right?
  Be very thankful if someone can tell me as soon as possible how to bring them back to the left!
  I am not aware of basic pc!
  Thank you very much

  Looks like you are looking for in the bookmarks bar. Try clicking on the Favorites icon in your toolbar (the button just to the right of the star) and selecting "Show bookmarks bar".

  If this isn't what you are looking for and you want to move the Bookmarks button, you can do this by doing a right click on the same button and selecting 'customize '. "" Once you've done that, you can drag the button whenever you want it on the toolbar and confirm the change by clicking the green "exit customize ' bottom right of the Firefox window.

• Can't see all my images in the library after LR 4 upgraded

  First of all, let me explain that when it comes to LR and catalogs I am a positive newbie, I just use LR to tweak the images and I am not very organized. So excuse the dodgy terminology below.

  When I used the LR3.6 option library listed all my files on the left side under "Folder" and showed a subfolder for each year from 2009-2012. I've now upgraded to LR4, and all I see is 2011. During the installation process of LR$ he asked me if I wanted to spend the process model, that I said yes and he did. Then, because I had read that 4.1 fixed a lot of issues, I downloaded and installed RC4.1 I run now.

  How can I make LR4 show me all my folders? I don't think I should be re - import all.

  Thank you forecast and soryy for the vagueries above.

  I realize that I did and raised a new question to help me fix it.

• Could not load the BIOS after RAM upgrade - Satellite A200

  Hello

  I've updated my RAM memory on my laptop Thishiba Satellite A200 (from 2 GB to 4 GB) but unfortunately now I can't enter the BIOS. Automatically load the operating system (windows 7 64 bit).

  How can I solve my problem?

  P.S. The new RAM works perfectly and it is recognized by Windows 7.

  Post edited by: bennito

  I don't know what you've done and why this happens, but what you can do is to check if the quick start option is enabled.
  Open Toshiba Assist > optimize > HWSetup > priority Boot and check the startup speed option it.
  Remember that it is set to Normal.

  Please, check and send comments.

• PC now does not see files on the rocket after firmware update

  Until I updated the firmware to v01.02.31P, whenever I plugged my rocket to my PC (Windows XP), it was considered to be a separate drive (e.g., F in Windows Explorer - "Devices with removable storage" and I had no problem using drag & drop, delete files, etc. and download podcasts on Web sites.) Since I've updated the firmware, every time that the rocket is connected to the PC it is now considered rather camera phone in Explorer Windows in 'My Computer' with internal and external memory card uSD

  However, all my existing music files are not 'seen' - for example i.e. the files are now shown as empty, even if the 'properties' of the internal memory shows significant used space and Windows Explorer can't see the files I put on the "rocket".

  Anyone can help getting Windows to 'see' my music files, or is it possible to roll back the firmware.

  Thank you

  The firmware update reset the USB MTP mode or detection automatic (it was before MSC mode). Files transferred in a mode are 'invisible' to your computer when it is connected to the other mode, as you have discovered.

  Just go to settings > USB Mode and she return to MSC if you prefer the way things were before.

• Recovery of the DSO after OS upgrade failure

  Our Oracle Linux 5 update operating system upgrade to Oracle Linux 5 Update 9 2. I want to ensure that we can recovery if something goes wrong. We have a knot three CARS with the following configuration:
  
  Oracle Linux 5 2 update
  11.2.0.2 Oracle grid infrastructure
  Oracle Database 11.2.0.2
  Backup software: Netbackup
  
  Discs
  Operating system and software Installations Oracle disk mirroring (ext3)
  DATA Diskgroup on RAID10 (ASM)
  FRA Diskgroup on RAID10 (ASM)
  Diskgroup GRID disk mirroring (ASM) - OCR/voting records/ASMParameterfile
  
  SCENARIO: OS upgrade fails and we need backup recovery. Have OS/Oracle software partition based backup files. We have RMAN backup.
  
  Questions
  * SysAdmin says he can't perform based on backup of OS/Oracle Software partition files. An appendix of files or a (bare metal) backup image-based backup necessary?
  * ASMLib packages will be upgraded. Will this affect the ASM disk or data on the ASM disks?
  Additional measures must be performed to ensure the success of the restoration?
  * All recommended measures that may be required?

  You may assume that the ASMLib upgrade changes the ASM disk headers, which, to my knowledge, it has not. If that was the case, even in theory, then ASMLib was a dependency of the ASM, which is not.

• "Your system is out of memory the application" SG crashing all the time after 2015 upgrade.

  Sometimes I get an hour of work, sometimes it crashes after 10 minutes. Seems to be worse with 4 k images, but happens with HD and 4 k of all sorts of different cameras images. Never happened with CC 2014 so I don't know what changed, but something seems broken and eats a lot of memory.

  

  Here are my machine features:

  OS X Yosemite 10.10.3

  3.49 GHz Intel Core i7

  32 GB OF RAM

  980, 4095 MB GTX

  For all Adobe software disk cache is a designated (start fail disc) 250 GB SSD internal

  Hope there is a solution for this. He was also past occasionally in first Pro CC 2015, but only in projects with many images of high speed 4 k.

  Should be fixed the memory leak in SG with version 9.0.1 update

• Problems with almost all of the adobe after Yosemite upgrade programs.

  It seems that each program has become a little bit broken.

  Here are some of my most frequent problems with creative cloud:

  -Photoshop (after having been opened for several minutes) cannot put items. "Photoshop cannot complete your request because of an error". Only solution restarts.

  -InDesign crashes at every second, I have change the pictures on the slips. Oddly precise timing but I tested.

  -Edge Animate freezes and crashes often.

  MacBook Pro (retina, 15 inches, mi 2014)

  Intel Core i7 2.2 GHz

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  Please refer to:

  1Compatibility Mac OS X Yosemite (10.10) FAQ | CC

  2.adobe Creative Cloud CC Yosemite 10.10 difficulty

  Concerning

  Baudier