Could not load the BIOS after RAM upgrade - Satellite A200
Hello
I've updated my RAM memory on my laptop Thishiba Satellite A200 (from 2 GB to 4 GB) but unfortunately now I can't enter the BIOS. Automatically load the operating system (windows 7 64 bit).
How can I solve my problem?
P.S. The new RAM works perfectly and it is recognized by Windows 7.
Post edited by: bennito
I don't know what you've done and why this happens, but what you can do is to check if the quick start option is enabled.
Open Toshiba Assist > optimize > HWSetup > priority Boot and check the startup speed option it.
Remember that it is set to Normal.
Please, check and send comments.
Tags: Toshiba
Similar Questions
-
Portege M400: Could not update the BIOS after installing Vista
Hello
I have improved my M400 for Vista.
I am trying to install all drivers Vista of Tosh. According to the instructions, the first thing to do is to update the bios.
So, I download the bios (v3.60) on the site and run the .exe, but he tells me that I need the common modules.
The only common modules that I can find on the Tosh site are for XP.
Can anyone help?
Thank you
Steve
You will probably need to update the BIOS before installing Vista on the laptop.
Then, you could install Vista again. -
Windows XP could not load the installer for battery on Satellite P20 S103
I have the above problem, I already downloaded the driver for the power manager here I do not see a battery?
I can't find it on the site of toschiba
the battery number is PSP20E 000XHV-No.I hope somewone here can help me with a driver or something I really don't now where to look further.
Thanks in advance
Wouter wally man welcomes wouter from Holland and canada at this timePS the operating system is windows XP to meet just more information
Hello
What do you mean by "I don't see a battery? Usually, you should always to be able to see the State of the battery, if you disconnect your computer from the power supply.
The powermanager manages just what powersaving profile is loaded when boasts a particular situation or condition (as full power or watch DVDs, etc...)
Cut just AC power to your PC and you will see the battery symbol.
Please clarify your question.Welcome them
-
Hi Experts,
I am really evil with Opatch following error... any suggestions would be very appreciated. ! Thank you!
am version of database upgrade R12.1.1 Vision of 11.1.0.7 for 11 GR 2 following this Doc.
Doc-ID 1585578.1 (Interoperability notes Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) )and I checked this as understanding OPatch tool and patch [1451669.1 ID]!
After you apply the patches on apps and db level pre-installation and Installation of 11.2.0.3 home.
When I tried to apply the Patch getting following error. Also, I can't apply any Opatch or Patch DB with each Patch am getting the same error
[oracle@ebs 14229857] $ /11.2.0.3/OPatch/opatch apply
Setup Oracle interim Patch version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle homepage: /11.2.0.3
Inventory Center: / oracle/oraInventory
from: /11.2.0.3/oraInst.loc
OPatch version: 11.2.0.3.6
YES version: 11.2.0.3.0
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
Could not load the patch object. Possible causes are:
The specified path is not an intermediary shiphome Patch
Metadata files are missing in the region of patch
Patch location = / oracle/14229857
Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
OPatch failed with the error code 73even if the patch 6880880 is successfully applied to the updated version OPtach also I set the Path variable for export PATH = $ORACLE_HOME/OPatch: $PATH
There is no problem with the permissions on files and directories. as I have cross checked.
/oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch lsinventory-details
Setup Oracle interim Patch version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle homepage: /11.2.0.3
Inventory Center: / oracle/oraInventory
from: /11.2.0.3/oraInst.loc
OPatch version: 11.2.0.3.6
YES version: 11.2.0.3.0
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_19-26-02PM_1.logLocation of the output file Lsinventory: /11.2.0.3/cfgtoollogs/opatch/lsinv/lsinventory2014-05-08_19-26-02PM.txt
--------------------------------------------------------------------------------
Installed products of higher level (2):Oracle Database 11g 11.2.0.3.0
Oracle Database 11 g examples 11.2.0.3.0
There are 2 product (s) installed in the home of Oracle.
Here are the details of Patch Log!
YES location: /11.2.0.3/oui
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
[May 8, 2014 18:58:59] History of patch file: /11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
[May 8, 2014 18:58:59] From ApplySession Thu May 08 18:58:59 IST 2014
[May 8, 2014 18:58:59] Starting apply Session at Thu May 08 18:58:59 IST 2014
[May 8, 2014 18:58:59] YES-67075: cannot load the patch object. Possible causes are:
The specified path is not an intermediary shiphome Patch
Metadata files are missing in the region of patch
Patch location = / oracle/14229857
Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
[May 8, 2014 18:58:59] OPatch will clean the files 'restore.sh, make.txt' and "backup cars, scratch," directories.
You will always be able to restore patches after this cleaning.
Do you want? [y | n]
[May 8, 2014 18:59:02] Y (auto-répondu by - silence)
[May 8, 2014 18:59:02] The user responded with: Y
[May 8, 2014 18:59:02] Size of the directory "/11.2.0.3/.patch_storage"before cleaning is 269296 bytes. "
[May 8, 2014 18:59:02] Size of the directory "/11.2.0.3/.patch_storage"after the cleaning is 269296 bytes. "
[May 8, 2014 18:59:02] UtilSession: Save for the restoration area was cleaned. For a complete list of files/directories
removed, please see the log file.
[May 8, 2014 18:59:02] YES - 67073:OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
[May 8, 2014 18:59:02] YES - 67035:System is intact, OPatch will not restore the system
[May 8, 2014 18:59:02] Finishing ApplySession at Fri May 08 18:59:02 IST 2014
[May 8, 2014 18:59:02] Total time spent waiting for user input is 0 seconds. End at Thu May 08 18:59:02 IST 2014
[May 8, 2014 18:59:02] Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
[May 8, 2014 18:59:02] Description of the battery: java.lang.RuntimeException: PatchObject manufacturer: Input file "/ oracle/14229857/etc/config/actions" or "/ oracle/14229857/etc/config/inventory" does not exist.
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObject.createPatchObject(PatchObject.java:2433)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObject. < init > (PatchObject.java:2000)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:2188)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1553)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5850)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2060)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.OPatch.main(OPatch.java:614)
~Thank you
Priya
Priya,
You try to apply (Patch 14229857)? If so, it's for Exadata then is it applicable?
11.2.0.3 patch # is 10404530
11 GR 2 11.2.0.3 database certified with E-Business Suite
https://blogs.Oracle.com/stevenChan/entry/11gr2_11_2_0_3
Please note that 11.2.0.4 is the Group of hotfixes later certified 11 GR 2.
11.2.0.4 database certified with E-Business Suite
https://blogs.Oracle.com/stevenChan/entry/11_2_0_4_database
Thank you
Hussein
-
Could not load the VT - d in ESXi 4
Hello world
My problem is that VT - d fails to load even if I think it should work. I'm under ESXi 4 u1 on ASUS P7H55-M Pro motherboard with 8 GB of RAM and Intel i3 530 cpu.
I activated the VT - d in the BIOS and tested it with the vt.iso from this link: http://communities.VMware.com/docs/doc-8978
It shows that VT is enabled on all hearts.
When I boot ESXi, it states that:
VTD failure loading with status-1, - 1, 0xbad0001
When I press ALT + F1, I have this error Message:
Could not load the iommu driver.
I don't understand, its permitted on all cores and tested with vt.iso. But ESXi does not always work as expected. Somehow the iommu driver does not load. Anyone have any ideas?
Concerning
Christoffer
Take a look at 5570 Xeon and i3 530 comparison: http://ark.intel.com/Compare.aspx?ids=37111, 46472,.
Looks like VT - d is not compatible with the i3.
---
VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4
-
When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.
Original title: Temp user login
Hi indhru,
- Did you the latest changes on the computer?
- You have security software installed on the computer?
Try the step after the connection to the temporary account below.
- Click on the Start menu.
- Type Regedit in the Run dialog box, and then press enter
- Access
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList - There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
- Make sure that the name of the key are not ends in ".bad".
- Make sure the RefCount value is 0
- Ensure that the status value is 0
-
Could not load the profile user (XP OS) and lost files
Hello
I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded. I am currently in the temporary profile that was created automatically by the system for this profile. It seems that files on another profile missing now and I can't get back my original profile. This profile has been my administrator profile that I created to replace the supplied profile admin system.
I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.
I've seen a few comments on the forums, but they are especially for non XP OS. Is it possible to retrieve the profile and files.
Please notify.
Thank you for your time.
Recovering from a corrupted or damaged user profile is a relatively simple operation. Follow the instructions in the following article:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >HTH,
JW -
MY LAPTOP STOPPED ABRUPTLY AND APPEARED A BLUE SCREEN AFTER I HAVE INSERT USB NETCONNECT. IT IS THE FIRST TIME HE TOUCHED WITH THIS ERROR. I DON'T KNOW WHAT AND WHY, ON THIS SUBJECT. PLEASE HELP ME TO GET RID OF HER... THANQ
Hello1. using a Sony Vaio laptop?2. don't you get also 'VzCdbSvc' and level: 'error '?If the answer is Yes to these questions, you can do the following.vzcdbsvc.exe is a process belonging to VAIO Entertainment studio. 'S called it VAIO Entertainment Database Service belonging to VAIO Entertainment studio.DESC. : Could not load the plug-in module.Step 1:a. Click Start > runb. Type "msconfig" and press enterc. Selective startup > Startup tabd. UNCHECK this process > apply > OKStep 2:Change the startup type of the Service:a. Click Start > run >b. Type "services.msc".c. right-click on VzCdbSvc. > properties > change manual start > apply > OK.d. right-click on the connection manager automatic remote access > manual change > OK.I don't know if this will solve your problem or not, but it is worth trying.Aziz Nadeem - Microsoft Support -
"original title: NTA0104.dll.
whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?
HM
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
Could not load the Norton power Eraser
Installed Norton Security. Everything works well except a pop up window that says error 5013,3.
Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".
No mater how many times I try, could not load the new version.
Don't know what I was doing wrong before, but when the pop-up window came this time it worked.
I'm glad that it worked, but I wish I knew why.
-
I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg
Hi Leif,
Where do you get this error message?
I suggest you to follow the steps and check if it helps.
Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.
http://get.Adobe.com/reader/?promoid=DINRS
Method 2: If the problem persists, perform a system restore and check if that helps.
-
Windows could not load the profile of the user
When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.
Please reply me with the solution that I use win xp sp2Hi citycc,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. are you able to connect to Windows?
4. how many accounts do you have on the computer?
See the Microsoft article below and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
-
Could not load the dll target, the error code 126
A "runner error" box keeps popping up saying "could not load the dll target, error 126" code. This appears at all different times, even when I'm not using the computer. I don't know why it gives me this error or how I can get rid of him for good.
Hello Tracy,.
Try to configure your system to boot into boot mode (Ref: http://support.microsoft.com/kb/310353) will help you identify the problem.
I hope this helps.
-
Could not load the faile to logon user profile service, the user profile.
Could not load the faile to logon user profile service, the user profile
That's what I have to answer when I try to log on to my PC Window Vista with my password.
Need help please.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
original title: I need to know what means this message and I can remove it from my computer
doess someone knows what this message means? Could not load the manifest attribute of the main class of C; \program files\frostwire\commons-logging, pot every time I look at this subject in my file, it appears, I'm not good at all with computers but I know im short-term memory or space on this computer and I tried to go into my programs and delete, can you please help me understand what I can and can not delete to give me more space? Thanks, im running Windows Vista! If you would like more information, I'm sorry, just ask me? Thanks again, I hope someone can help me! :(
This discussion forum on Microsoft Security Essentials antimalware. You can get help in the Microsoft Vista answers forums - http://answers.microsoft.com/en-us/windows/forum/windows_vista
Jim
Maybe you are looking for
-
Hello Just starting to learn iMovie. I was filming a football match and have everything changed in imovie. However when I go to share videos to youtube this option is grayed out. I don't want to make a movie. I want to keep the separate clips and add
-
What is the difference between a NB200-10z NB200 - 11 h?
can someone tell me, they both look the same, they are also good brown color, same features, same price I think... I looked on the toshiba site and, apparently, the only difference I see is the 10z has bluetooth and the 11 m isn't. someone who can co
-
Hello I have recently reinstalled windows 7 on my hp laptop. in Device Manager, the following hardware ID must still pilots. : ACPI\HPQ6007 ACPI\INT33A0 When I search on google, I understand that one needs a processor (AMD)? Driver USB 3.0 and the n
-
Trying to update my acer aspire driver vga m5 - 583p?
I downloaded an earlier version of the graphics driver of ACER in the hope that since he would not be one custom I couldd reinstall or download a more recent version of it and it woul work better. Could someone help me find the right link to install
-
unistall program will not let me delete a lexmark printer from my computer updated from xp to vista
My computer has been updated from xp to vista. I install a lexmark printer and it does not work. does not print. unstall program don't take if off. Say not compatible to Windows vista.