Can't put the computer on standby or into hibernation.

Similar Questions

• I have XP Home Edition and when I put the computer in standby mode, it will automatically wake in a few seconds. I don't touch the mouse or keys to get him to wake up.

  When I select 'Stand by' in the menu to stop the computer my computer will remain only in standby for a few seconds.  I'm not physically do anything to cause the automatic return.

  Hello

  1. have you made changes on the computer recently?
  2. you have any device connected to the computer network?
  3. what device was put in place to wake up the computer?

  Method 1.
  Follow the steps listed in the article below and check if that helps resolve the issue.
  How to solve the problems of hibernation and standby in Windows XP
  http://support.Microsoft.com/kb/907477

  Method 2.
  Also there is a possibility that another 3rd party application is causing the conflict.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Put the computer to sleep

  I can't put my computer on standby by using the portion of the screen saver to personalize.

  I can't put my computer on standby by using the portion of the screen saver to personalize.

  When you're at the window of the screen saver, click on change power settings > select a power plan, balance, energy saver or Performance > under that you have chosen, click on change plan settings > in position to put the computer to sleep , click the pointer, and then select when the computer goes to sleep > click save changes > click on change plan settings > click onchange advanced power settings > scroll until media settings , click the plus sign + to develop > extend when media sharing > click battery > click on the pointer, and then select " allow computer to sleep " > do the same thing on Plugged In option > click APPLY/OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Suddenly I can put is no longer the computer in standby mode manually or automatically.

  Original title: Control Panel - Power Option

  Suddenly I can put is no longer the computer in standby mode manually or automatically.  I can only turn off or restart.

  Hello

  1. do you mean to say that the Standby button is greyed out?

  2 How long have you been faced with this problem?

  3. don't you make changes on the computer before this problem?

  Check the question in the clean boot State and send the same return. Also, contact the manufacturing of computer for BIOS update.

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• I wanted to shoot penalty, put the computer in safe mode, now its blocked, firm FF 3 times, computer rebooted, still in safe mode.how out safe mode

  I wanted to do in the event of problem, I put the computer in safe mode and now I can't get out of safe mode. I closed FF & computer restarted 3 times, even shut down the computer, still in safe mode. What should I do to get out of safe mode?

  I gave up and took my laptop to the Apple store... everything is ok now... I don't know what they were doing.

• Files on a share network stuck as 'read only' to put the computer to sleep.

  By necessity, I use my 98 computer windows that the file server since tempting to access any shares of Vista will cause Windows 9 X to crash. It is already used as a print from the Vista computer server does not have a parallel port.

  I worked on a Microsoft Word document and subject to frequent interruptions. When I put the computer to sleep before walking away from the keyboard, it isn't properly disconnect the Win98 system. Wake up to the computer, I am unable to save office documents, because they are locked for editing.

  In addition, sometimes even after I close Word or Excel, the system is not disconnected. Even when I stopped all other computers, the Win98 system reports that there are still users connected to the system when I go to stop him so. Is it possible to force the Vista computer to disconnect all network connections before you put it to sleep or stopping then the Win98 system recognizes that no one is online and that all the files will be closed?

  I really don't want to have to close a document that I am in the middle of working on when I have to walk away from the keyboard, but this seems the only solution to the problem. Leaving open is the main reason that I put the computer to sleep rather than stop it. Recording locally is not really a good option because I want files stored in one place, and Vista Home Premium does not support synchronized folders.

  Any suggestions? I already use the Briefcase feature to save documents on a flash drive, do I have to use the drive in question and transfer it to the server through network disks? This seems to beat the goal of a network.

  The affected systems are Windows 98 Second edition and Windows Vista 64 bit Home Premium =.

  Hello

  Win 98 is a former client OS, server to call (or any other OS cleint) is nice, but this does not mean that they can be found on a peer-to-peer network and behave like a real server.

  Under this situation (using Win 98 for a server) it is not advisable to change the files over the network. First copy them to the Vista Edit computer and then synchronize. Return using one of the many free synchronization applications that work on most of the windows releases.

  Example, http://www.snapfiles.com/reviews/Allway_Sync/allwaysync.html

  There is no judgment of network functionality, if the Application is enabled and go to sleep while a file is open on Win 98 it will stay open. Closing the file needs to be done by the application.

  -------------------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I make the computer sleep after 5 minutes of inactivity on the logon screen?

  Original title: How to sleep in the login screen?

  How can I make the computer sleep after 5 minutes of inactivity on the logon screen? Currently, on the login screen, white screen, but the computer is still running. Sleeping would save a lot of energy because the computer is used most of the time.

  Hi Phil.Ganchev,
   
  Using a laptop or a desktop computer?
   
  The reason for this question is, if you have a plugged AC adapter you must set power accordingly as opposed to laptop settings battery operated.
   
  I suggest you head over to the power settings and create your own power management.
   
  a. power by clicking on the Start button, open the Options click on the Control Panel, clicking system and security, and then clicking Power Options.
  
  (b) according to the plan you want to change, click on change plan settings.
  
  c. on the parameters of change in the plan page, choose "Put the computer to sleep" that you want to use when your computer is running on battery (if applicable) and when it is plugged.
  (Change in 5 minutes for the batteries and sector)
   
  Reference:
   
  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to put the computer in bios at startup on a p6 hp - 2316 s

  How can I put a computer p6 - 2316 s HP in the bios at startup?

  As soon as you turn on the computer, repeatedly press the F10 key.

  If you have set a "password BIOS", enter first.
  As soon as you press ENTER to submit your password,
  Press F10 repeatedly.

• restarting the computer mode standby

  Hello, when I put my computer to sleep or turn it off, it goes to the top and comes to the blue screen asking me my password. Sometimes, I get the "ease of access" options and have to close this dialog box, so it's maybe part of the problem. The only way I can turn off the computer of power off and remove the battery. Any ideas? I think it started after an automatic update of Windows 7.
  Tom

  Hi Thomas,

  ·         Are you referring to the login screen - request password?

  ·         What happens when you close the Accessibility dialog box?

  You may experience this problem if the computer does not stop correctly. Follow the suggestions below for a possible solution:

  Method 1: I suggest that you check allow this device to wake the computer have a check mark.

  Here are the steps:

  a. click Start, type Device Manager in the search box.

  b. go to the Device Manager.

  c. click on keyboard, it will display your keyboard, right-click and go to Properties.

  d. Select power management.

  e. check allow this device to wake the computer.

  Follow the same procedure for mouse, restart the computer and check if it works properly.

  Method 2: I would also say that you update your display drivers, you can log on to the manufacturer's Web site and download the latest drivers and install.

  For more information:

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: I suggest you to perform troubleshooting of power utility to set the power of your computer settings and check if it works properly.

  For more information, see the following articles:

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Let us know if it helps.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• How can I put the tab on bottom bar in Firefox 29?

  Why did the subject: config browser.tabs.onTop. set to false no longer work. Is not acceptibale, unless I'm doing something wrong and it worked in the last version. Please answer

  You can also move the lower position with code tab toolbar in userChrome.css that basically, you just give a higher value to the tab bar of -moz-box-ordinal-group (more toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).

  • [997353/questions/997353] How can I put the back below the navigation tabs?

• Can I put the SSD on my Z Satellite series?

  Can I put the original (128 GB) SSD 256 GB?
  I can screw the back cover?
  Who has experienced this?
  THX,
  Erik O.

  Since the SSD is not accessible to the user you can void the warranty if you open Notepad.

  The SSD can be improved, but you need an SSD 1.8 "mSATA. A standard 2.5 "SATA SSD does not.

• Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?

  Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?  I don't wan to upgrade all the way to El Capitan.  Some of my software may not be compatible.

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  You should have a complete backup of your system before performing an upgrade. Given that, we risk minimum trying to El Capitan before adopting it. Instead of spending $20 on the Mountain Lion, when El Capitan is much higher.

  There are not many apps running in Cougar and El Capitan.

  Compatibility lists: http://roaringapps.com/apps

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support