can't put the path in place there where I want to!

Similar Questions

• Can I use the patcher to indicate source where I want my GLUE CLIPS to go?

  I know that FOLLOW the TARGETING is the common way that first decides which track to place your pasted clip(s.) the clip appears on the LOWEST targeted track.

  It would be perfectly fine, if targeting track was ONLY used to paste... However, track targeting is used for all sorts of other things as well, like match frame, mark the clip and especially for me, the RIPPLE TRIM - which I use all the time in the edition of images... so well that I almost always ALL of my targeted tracks. (I use shortcuts ripple trim edit next/previous to the read head a LOT, and tracks need to be targeted so that it works.)

  The problem is that if I ever want to STICK anything, it ends up in the LOWER rail and replace images that I always here. To avoid this, I have to manually UN-target of some of the tracks on the bottom, press CTRL + V, and then re - target the so that I can continue normally edition

  I know not alt - drag clips to copy. I use it frequently, but it does not have to move some clips from other projects or sequences.

  Here's my question:

  There is an OPTION somewhere that I can switch, which uses the PATCH SOURCE to indicate the path where I want my pasted clips outward, rather than target tracking? Currently, source patch is used ONLY to indicate the way to insert or overwrite - that would be perfect for sticking in, IMO.

  If not, is there an option to cause the HIGHEST targeted track to be the indicator where a pasted clip should go? That would work too.

  I searched for an answer to this one, and I found a few other threads of people having the same problem. In these discussions, people seem to really understand what the problem is. I hope I've explained it well enough so that you can understand! If this isn't the case, you can see their explanations of the same thing, in these discussions:

  Re: Feature request: turn off tabs target set destination for copy paste

  EN: Option to match the very HIGH media enabled video track

  I ask the question again, because I'm not sure everyone understood the question of those other moments when it was requested! Also, maybe this feature has been added recently and there is no information about it.

  Someone knows something about this? Huh?

  Only the targeting is used for pasting.  Patching applies only to images loaded into the Source monitor, not in the Clipboard.

  However, you can set keyboard shortcuts for targeting.  Thus, a shortcut to erase, to target the specific track you need, paste, then a final shortened for all photos in Flickr to retarget.

  Is not ideal but maybe less clicking on in any case.

• How can I put the sign of degree of a relatively unused key on the keyboard?

  I want to change the ^ key to the degree

  º sign... How can I do this? AND every time I use the symbol of the degree character can I put the symbol degree... where I want... but on the open next line... isn't exactly like on this e-mail.

  The term is remapping the keyboard and you can find this informative article

• KB951847 fails to install and I can't install the other updates since there is no.

  I tried every proposed difficulty and can not install the security updates and I can't install the other updates since there is no.  I tried the fixit, the convenience store.  I get no error number - the name of the updated and say update has failed.  I tried the fixit suggested in default and aggressive modes.  I tried stopping the service to update and it starts again.  There is no place for uncheck do not install this update.  The center of update gives me only one choice of what to put up-to-date and KB951847.  I tried to disable the start-up all elements of microsoft services and restart the computer and that did not work.  I'm out of ideas.

  Thank you.

  KB951847 is an optional, not security updates (Yes, even if it is an Important update). Feel free to hide it & move on with your life.

• Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?

  Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?  I don't wan to upgrade all the way to El Capitan.  Some of my software may not be compatible.

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  You should have a complete backup of your system before performing an upgrade. Given that, we risk minimum trying to El Capitan before adopting it. Instead of spending $20 on the Mountain Lion, when El Capitan is much higher.

  There are not many apps running in Cougar and El Capitan.

  Compatibility lists: http://roaringapps.com/apps

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• What are the issues and how can I put the documents in the files?

  As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

  I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

  I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

  I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

  What are the issues and how can I put the documents in the files?

  I created a few files like this:

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
     <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="FLD_CREATE_FOLDER">
  <Document>
  <Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
  <Field name="fPath">/RAFT/Appraisals/</Field>
  <Field name="fFolderName">0111234567</Field>
  <Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
  </Document>
  </Service>
  </GenericRequest>
     </soapenv:Body>
  </soapenv:Envelope>
  

  Here's a sample call:

  The virtual path is/Appraisals/0111234567 /.

  The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

  I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

  When I run this it stores the file but the file does not appear in the folder.

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
       <soapenv:Header/>
  <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="CHECKIN_UNIVERSAL">
  <Document>
  <Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
  <Field name="dDocType">Document</Field>
  <Field name="dSecurityGroup">Public</Field>
  <Field name="dDocAccount"/>
  <Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
  <Field name="xFHACaseNumber">0111234567</Field>
  <Field name="xFHADocumentType">Appraisal</Field>
  <Field name="dDocTitle">tuesday2document.txt</Field>
  <File name="primaryFile" href="whereami.txt">
  <Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
  </File>
  </Document>
  </Service>
  </GenericRequest>
  </soapenv:Body>
  </soapenv:Envelope>
  

  Returns:

  <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header/>
     <env:Body>
        <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
           <ns2:Service IdcService="CHECKIN_UNIVERSAL">
              <ns2:Document>
                 <ns2:Field name="reserveLocation">false</ns2:Field>
                 <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
                 <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
                 <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
                 <ns2:Field name="dDocType">Document</ns2:Field>
                 <ns2:Field name="scriptableActionErr"/>
                 <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xWebFlag"/>
                 <ns2:Field name="dDocCreator">C03999</ns2:Field>
                 <ns2:Field name="dDocAccount"/>
                 <ns2:Field name="xClbraUserList"/>
                 <ns2:Field name="dLocation"/>
                 <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWebExtension">txt</ns2:Field>
                 <ns2:Field name="isNew">1</ns2:Field>
                 <ns2:Field name="IsQueryObjectPersistent"/>
                 <ns2:Field name="xWCTags"/>
                 <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
                 <ns2:Field name="dClbraName"/>
                 <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xClbraAliasList"/>
                 <ns2:Field name="dActionMillis">72487502</ns2:Field>
                 <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
                 <ns2:Field name="dIsPrimary">1</ns2:Field>
                 <ns2:Field name="isInfoOnly"/>
                 <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xWCPageId"/>
                 <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocID">1216</ns2:Field>
                 <ns2:Field name="dPublishState"/>
                 <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
                 <ns2:Field name="doSorting">0</ns2:Field>
                 <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevisionID">1</ns2:Field>
                 <ns2:Field name="xExternalDataSet"/>
                 <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
                 <ns2:Field name="UseForwardOnlyCursor"/>
                 <ns2:Field name="noDocLock">1</ns2:Field>
                 <ns2:Field name="dID">1208</ns2:Field>
                 <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xPartitionId"/>
                 <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="dDocOwner">C03999</ns2:Field>
                 <ns2:Field name="dUser">C03999</ns2:Field>
                 <ns2:Field name="isDocProfileUsed">true</ns2:Field>
                 <ns2:Field name="scriptableActionParams"/>
                 <ns2:Field name="dpEvent">OnImport</ns2:Field>
                 <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
                 <ns2:Field name="DocExists"/>
                 <ns2:Field name="dConversion">PassThru</ns2:Field>
                 <ns2:Field name="StatusCode">0</ns2:Field>
                 <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dStatus">DONE</ns2:Field>
                 <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevClassID">1208</ns2:Field>
                 <ns2:Field name="idcToken"/>
                 <ns2:Field name="dRevLabel">1</ns2:Field>
                 <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xStorageRule">webasset</ns2:Field>
                 <ns2:Field name="localizedForResponse">1</ns2:Field>
                 <ns2:Field name="dPublishType"/>
                 <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
                 <ns2:Field name="dFormat">text/plain</ns2:Field>
                 <ns2:Field name="scriptableActionType">3</ns2:Field>
                 <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
                 <ns2:Field name="dpAction">CheckinNew</ns2:Field>
                 <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="refreshMonikers"/>
                 <ns2:Field name="xWCWorkflowAssignment"/>
                 <ns2:Field name="isEditMode">1</ns2:Field>
                 <ns2:Field name="refreshSubMonikers"/>
                 <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
                 <ns2:Field name="changedMonikers"/>
                 <ns2:Field name="dRevRank">0</ns2:Field>
                 <ns2:Field name="StorageRule">webasset</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList"/>
                 <ns2:Field name="xComments"/>
                 <ns2:Field name="dAction">Checkin</ns2:Field>
                 <ns2:Field name="isDocProfileDone">1</ns2:Field>
                 <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dRawDocID">1215</ns2:Field>
                 <ns2:Field name="xLibraryGUID"/>
                 <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWorkflowState"/>
                 <ns2:Field name="dProcessingState">Y</ns2:Field>
                 <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dDocAuthor">C03999</ns2:Field>
                 <ns2:Field name="dOutDate"/>
                 <ns2:Field name="dIsWebFormat">0</ns2:Field>
                 <ns2:Field name="scriptableActionFlags">12</ns2:Field>
                 <ns2:Field name="isCheckin">1</ns2:Field>
                 <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
                 <ns2:Field name="dExtension">txt</ns2:Field>
                 <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="prevReleaseState"/>
                 <ns2:Field name="isStatusChanged">1</ns2:Field>
                 <ns2:Field name="dReleaseState">N</ns2:Field>
                 <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
                 <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dFileSize">19</ns2:Field>
                 <ns2:Field name="xIdcProfile"/>
              </ns2:Document>
           </ns2:Service>
        </ns2:GenericResponse>
     </env:Body>
  </env:Envelope>
  

  CBF8EF9C59F8A6C84EB31C68F0903399

  Replace fFolderGUID by fParentGUID

• You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  Yes.  I find it easier to type text, and then use the move tool (shortcut V) (looks like an arrow) to place it where you want.

  To bring up the character and paragraph panels go to WINDOW > CHARACTER or WINDOW > PARAGRAPH.

  I hope this helps.

• How can I put the hyphenation option in the Control Panel on top of indesign CS6?

  How can I put the hyphenation option in the Control Panel on top of indesign CS6?

  I know how to get to the hyphenation option, but I want the button is more accessible by placing the box setting on the Panel of control/toolbar at the top of my indesign CS6.

  Thank you!

  I think that I've done enough space for it now, then, what is the problem?

  

  I uncheck paragraph stuff, then why isn't it appear there?

• Can I put the video on the flex page other than flv, mpeg, wmv, etc.

  Can I put the video on the flex page other than flv, mpeg, wmv, etc.

  I personally spoke with a representative of Adobe in the early fall on this issue. Currently, there is no other other than .flv video format that can be used in flex 2.

  Bob I.

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• How can I put the tab on bottom bar in Firefox 29?

  Why did the subject: config browser.tabs.onTop. set to false no longer work. Is not acceptibale, unless I'm doing something wrong and it worked in the last version. Please answer

  You can also move the lower position with code tab toolbar in userChrome.css that basically, you just give a higher value to the tab bar of -moz-box-ordinal-group (more toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).

  • [997353/questions/997353] How can I put the back below the navigation tabs?

• Can I put the SSD on my Z Satellite series?

  Can I put the original (128 GB) SSD 256 GB?
  I can screw the back cover?
  Who has experienced this?
  THX,
  Erik O.

  Since the SSD is not accessible to the user you can void the warranty if you open Notepad.

  The SSD can be improved, but you need an SSD 1.8 "mSATA. A standard 2.5 "SATA SSD does not.

• Can I put the Satellite P100-240 with internal fingerprint reader

  I have a Satellite P100-240.
  Although he did not come equipped with material to print finger scanning, it has clogged the hole in the box where he would go.
  So I wonder, can I get the hardware scanning separately and adapt it to the laptop?

  I don't see any option for the material to be sold separately on the Tosh site and I'm not even sure who makes the hardware for them so I can source it independently.

  Can we offer here advice or information on this operation?

  Hello

  You are right. Some P100 units support the fingerprint, and some units have been delivered without this feature.
  As I m not wrong not these fingerprints can be upgraded

  But to be 100% sure you should ask the local ASP (authorized service provider) for details.
  But in my opinion you can not put the laptop with fingerprint reader.

  Good bye

• How can I return the path of a test step VI in LabVIEW?

  I would create a VI that will return all of the VI paths that are associated with the test steps in a TestStand sequence.  How can I return the path of the VI associated with a test step?  Here is a starting point that will return the first step of the sequence.

  

  You must convert the Module to a LabVIEWModule (use the variant to the data node), then you can use LabVIEWModule.VIPath.  If you use TestStand 2010, you can call LabVIEWModule.GetVIAbsolutePath to find the VI in the case you are calling with a project.