Can't remove the "Sent" items, even if I open them first. Help?

Similar Questions

• How can I remove the split screen option when you open an attachment on the email?

  I had used the option of screen split using strong control of the two tabs on the toolbar at the bottom of the screen and right click for the split-screen option.  Now, when I open an application such as Internet explorer, it happens in the split screen mode.  This is quite annoying and I would like to know how to restore everything in full screen when opening applications, web pages, etc.

  Thank you.

  Hi ClaudiamYE,

  In addition to querry of Samhruth G, please let us know what happens if you click on optimize your internet explore or any application, you get full-screen this time?

  As your subject what I understand you face split screen problem when opening word document in e-mail, so it is called reading pane. You can disable it from within Word, click on start-> all programs-> Word 07-> click the Ribbon on the upper left-> select the Word Options-> Popular => uncheck «attachments open in full screen...» ».

  I hope this helps.

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  Not while you're still editing the project.  When you have completed the project and shared it and are sure that you do not want to do any editing more far, you can delete the whole project.

  If you do a significant amount of iMovie editing you really need to put your libray (ies) on a large external hard drive.  Another thing you can do is to divide your work between different libraries and move those that are not currently on a removable drive.

  Geoff.

• Can't remove read only attribute even using the command "Attrib - r".

  I have my computer laptop configuration to dual boot Windows Vista and Windows 7.  I installed Windows 7 to see Vista, images, music files and videos Documents in its libraries.  These four files have become read recently that in Vista, and I can't remove the read-only attribute.  I tried to use the attrib command in command as suggusted in KB326549, but I get a message "access denied."  I want to be able to access these files from two operating systems so that I don't need to save the files on two hard disk partitions.  Any suggestions?  Thank you.

  Jon

  By default, you have only write access to folders and files located inside your user (c:\users\yourname) directory, some hidden folders, and any file that you created.

  The only time you need to write access to all files outside of this area is at this time do system administration or install a program.

  This can be done easily by running some tool or install the program you use "Administrator" by right-clicking on it and clicking Run as administrator, which allow the tool access to the system.

  It's the new way of doing things in Windows Vista - the system is locked, and only the programs you are running as an administrator or you request automatically the authorization are allowed to access your computer. This will prevent programs to access your computer without your knowledge.

  This command "Run As Administrator" is ideal to run on Windows Explorer and command control.exe (Panel).

  It is * NOT * recommended that you change the security settings to allow write access on the operating system created for files and folders, as this will significantly reduce the security of your system.

  So, in essence, it becomes a question of permissions/ownership.  Here's how to deal both:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product).  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!
  Lorien - MCSA/MCSE/network + / A +.

• I want to save as a .wmv file, so I can burn it to a CD, but I keep getting an error 0 x 87160139 "find missing or remove the unusable items in your project and then try again.

  I have a movie... great... now I want to save as a .wmv file, so I can burn it to a CD, but I keep getting an error 0 x 87160139 "find missing or remove the unusable items in your project and then try again."  so I tried to change the format of mp4 to mi/gal (what I know now was not necessary), but it will not save yet. I would like to make photos and videos I use.   I think that this video might be too big? not sure... also, all files have the same name and in the same folder that I shot, I'm in a block, any help appreciated! Thank you.

  -Mark

  Hi Mark,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-program/Windows-Live-Movie-Maker-error-0x87160139/9e94fc1a-1542-E011-9BAC-78e7d160ad4e

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/sorry-your-movie-cant-be-saved-find-any-missing/7fc5ae42-8297-4e64-B27F-f48d30658d08

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• My windows mail does not display the "sent items" when I send an email or reply to an email or click "request read receipt. How can I fix it?

  Windows Mail problems:

  1 not showing my sent emails or emails responded to my "sent items".

  2. when creating a new email and clicking on tools and then click on "Request read receipt" If does not appear in my "sent items".

  3. Please help me with this problem.  I need to keep track of what I send to businesses.  What happened to my Windows Mail?

  Windows Mail problems:

  1 not showing my sent emails or emails responded to my "sent items".

  2. when creating a new email and clicking on tools and then click on "Request read receipt" If does not appear in my "sent items".

  3. Please help me with this problem.  I need to keep track of what I send to businesses.  What happened to my Windows Mail?

  Click the sent items folder > view > current view > show all messages

  t-4-2

• How can I remove the Windows Equium A60 operating system

  How can I remove the Windows of my Equium A60 computer operating system?

  If you want to have the own pre-installed OS simply use sent recovery CD/DVDs. Before installing the OS launches the disk HARD integer will be deleted.

  If you have t n, use the facilities of Microsoft CD. You will find the option to format the existing partitions or even to delete the partitions.

• How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

  How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

  1. Please select from the menu bar Terminal

  ▹ terminal preferences... ▹ Profiles ▹ Shell

  If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

  2. If step 1 does not resolve the problem, see below.

  Back up all data.

  Select

  New Shell command ▹

  in the Terminal menu bar. Uncheck the box marked

  Run the command inside a shell

  If it is enabled.

  Copy and paste the following line into the text box that appears, and then press return:

  /bin/mkdir disabled_shell_files

  Close the Terminal window that opens. Repeat with this line:

  /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

  History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

  Close the window and open a new test.

  You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

• I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  But what was your question? virus? most of the time its not even located in thunderbirds dirctories. Then it reappears.

• I have a C5580 AND a C5280... and can not remove the ink of one of them.

  I can't remove the ink cartridges from the printer. Looks like the small flat plate plastic which is located directly in front of the installed cartridges, sits too high and blocks the inks come off.  I think the plastic plate should probably lower itself automatically, when the cartridges to move to the right and stops for easy removal... right? How can I fix it?

  OK, sorry I couldn't help.

  The gas station is on the right, the capping station and plate Assembly that block access to the cartridges are all part of this mechanism.  If the plate is not the road moving mechanism of the gas station does not work correctly.

  Even if there is a message of paper jam carriage it is an indication that the transport does not properly move, or if the sensor that detects the movement of the trolley does not work.  In this case, the transport would be likely to slam at the edge of the printer, which seems not to be the case, it is therefore likely related to a blocked movement of transport.  This can be caused by a locked service station.

  In any case, I will not waste your time with any further discussion in this thread.

• Why has my direct mail ceased to save to the sent items folder?

  A few days ago (28/01/12), my windows live mail has ceased to retain one of my sent items.  I can't find any option that might have been operated inadvertently.  Can anyone help?

  Thank you

  If you use the version of WLM 2011...
  Click the sent items folder > above, click View > custom views > under description of view #2, make sure that it is said to Show the message. If she hide the message, click on the word Hide and in the zone of the pop-up window, click Show the message > OK when finished.

  If you use the version of WLM 2009 > in my opinion, it goes like this > sent items folder > in the Gil, click View > click View Cureent > click Show all messages. (I use version 2011. Is not sure of the exact wording in the 2009 version).

  If none of the above works please repost in Windows Live Solution Center, e-mail Forums - son of Mail section:

  http://windowslivehelp.com/forums.aspx?ProductID=15

• Outlook Express 6 problem: send an email I get an error message and the email is not put in the sent items folder

  Outlook Express 6, Windows XP SP 3

  Problem: send an email, I get an error message and the email is not put in the sent items folder while the email (and attachments, if any) are successfully delivered to the recipient.

  The full error message is always useful, but I'm sure you have damaged dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. Error number: 0x800CCCD2

  original title: error number: 0x800CCCD2

  Can anyone help with this issue:

  Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2

  Thank you!

  Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.

  Best, Douglas

• loss of the contents of the 'sent items' folder in windows mail

  Somehow all my emails sent in the 'sent items' folder of windows mail have been dumped. It's the second time that this has happened almost two years, I've been using vista. I checked to make sure that "show all messages" is accused in the "current view" for this folder. What could have caused this? These messages are recoverable? I often see messages sent from various pieces of information and would like to have them back.

  I suggest you go after that each file previous e-mail from the Windows directory where they are stored (and not only the sent items folder) and bring them into a separate file.  Then open with your e-mail program to access the sent items folder that it contained - but I now see that Windows Mail does save all emails in a file separated as it happens with Outlook using a PST file to store emails, but rather to the separate folderr, but I think they can be stored as .eml files as well as in folders so it is still possilble).  I read what follows in another post: "Windows Mail stores mail in files .eml, a file for each message, more more information about messages came together in a single file over (sorry, I don't remember his name)." I think that there is also a file for each folder. All these files are, by default, hidden - which means that you must activate the search for hidden and system files when looking for them. "I don't know for certain if this is accurate or if it will help, but it can mean that snapshots might work if you go after types of file using Windows Explorer and not Windows Mail.  But I think that one of the following products will work better (and faster) since some seem to be capable of managing entire folders at the same time.

  Here are a number of free file recovery programs that may be able to help you.  Try them in the suggested order.  For this you will need to at least know the name of the folder and perhaps file names (or least their extensions - although in some cases that is perhaps not necessary).  I am not sure if these will work with Windows Messaging files, but I think that it's worth it to check a few is:

  http://www.watchingthenet.com/recover-deleted-files-folders-in-Windows-with-free-undelete-utility.html (try this one first because it says it can recover entire folders and then you do not have to know the names of files)

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (try Recuva second - it is the best for general file recovery and can also operate in this case).

  http://www.SnapFiles.com/get/DiskDigger.html (if you wan't to keep trying, try this next.)  If it doesn't work, the chances of the any of these work programmes is very thin but you can try as much as you want).

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  Here is a commercial program which claims can be done, but it costs $99: http://www.diskinternals.com/mail-recovery/.

  Here's another commercial program that costs $69: http://www.vistafilerecovery.com/email-recovery.

  Here's another commercial program that costs $50: http://www.emailadept.com/Windows-Mail-Recovery.htm.

  Here's another commercial program that costs $40: http://www.tech-pro.net/windows-mail-recovery.html.

  I hope that one of the free programs can help, but if not, then I hope one of the commercial products helps if you want to spend money on recovery.  I don't recommend commercial products - I don't know any one of them and just offer them as an option.  Most include a free trial where you can see what you are able to get it back before you actually buy it so the risk in these cases is minimal - but I'm not entirely sure how they will interact with your system - once again, I only offer them upward in option and you should use them at your own risk.  Regiarding all of the 3rd party software, Microsoft does not recommend this product and you install and use at your own risk.

  Honestly, I hope that you are able to recover your lost emails using one of the above programs.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.