Can't see Joikuspot wifi network

Similar Questions

• Can't see some WiFi networks, while others may

  This problem only occurs on the floor of a convention center (and it takes place in several events)

  (1) I see some networks, but not the designated convention center WiFi free

  (2) everyone around me (a few feet), automatically detects and connects to the network

  (3) I do my cell phone a hotspot.  I detect cela, but does not connect.

  (4) I go back to my hotel room, easily detect / connect to the wifi at the hotel, as well as easily detect / connect to the hotspot.

  I use Windows 7 Professional

  Compare the networks that you can see with one of your colleagues.  You see them with the same signal strength?  If it is then maybe your ability to receive card WiFi is abnormal and the desired network arrives just in below the level that he can cope.

  If this is the situation then search this forum, the support site for your computer manufacturer & their forums of users for your WiFi card.  See if other people have reported similar problems and how they fixed them.  If there is no guideline anywhere then reinstalling the card driver WiFi might be the first thing to try.

  I made this suggestion because my card WiFi Dell Inspiron 1545 [Broadcom 1397] could never receive the same strength of signal to others could.  Several other users of Broadcom 1397 reported the same problem.  In this case, the solution was to uninstall Dell utility WiFi control then [Device Manager], select the WiFi card, look in its properties, driver tab and back the driver by default that came with Windows 7.  I don't pretend that your solution will be the same and I invite you to search for reports from other users.

• Unable to see a wifi network with Atheros 5005 g wireless network card

  Hi, new to this.

  I tried Hnatyshyn best part of a month for my Equium M50 PSM59E to see a wifi network that broadcasts on 13(unlucky for some) channel.

  I can't screen authetication for network WPA - PSK on the wireless network settings. The wireless network card is the Atheros 5005 G with the latest version of the driver downloaded from Toshiba and KB893357 Knowledge Base.

  The network is visible in this computer with a plug in DLink DWLG650 +, how the Atheros to work?
  Soon Alex

  Hello

  are the two of you using Configfree? And the most interesting thing would be: what system are you using?

  Otherwise I can give you a link to another thread where you can probably find a few info´s on the configuration of wireless network:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26088&MessageID=95706𗗚

  I suggest all of you to google around a bit. Most of the questions are either here in the forum in the section wireless or on some Internet sites that can be found with the help of google.

  Cheeers

• IdeaPad Yoga 13 can't see 5 GHz network

  Hi all

  Just got the machine from Bestbuy today, love so far except that Yoga can not see my network 5 GHz on the wireless networks list. I can connect next to 2.4 Ghz without problem.

  I have Asus router providing two SSID - 2.4 Ghz and 5 GHz, my X 220, Samsung phone, iPad is not any problem connect to one of them - excpet the 13 yoga.

  I tried to download and run the Realtek driver on the Lenovo support site and still can't see 5 GHz network.

  Does anyone have the same problem?

  Thank you

  
  

• Can not see all the networks Wi - Fi on Satellite P755-S5263

  Hello

  Just unwrap my gift: Satellite P755-S5263 and he can't see any wi - fi, I'm in the city and see a lot of networks on my BB and I press the touch button below the LCD for WE / OFF radio, nothing help, just orange light on the light wi - fi.

  No problems seen in Control Panel / networks, see Intel(r) WiFi Link 1000 BGN, works correctly and enabled, version of the 14.0.0.2 drivers.
  Is there any other secret of installation/swith that I don't know!

  I am on Windows 7, I really want to work today, appreciate your help. Thanks to all the guys.

  Gracias
  Viktoria

  Hello, Viktoria

  Perhaps is not activated WLAN card correctly?

  Please use the FN + F8 key combination and remember the wireless network adapter is correctly enabled.

  I hope this will help you.

• Dell XPS 13 (2015) can't see 5 GHz network

  Hello

  I have the new laptop XPS of 13 2015 with Broadcom 802.11ac configuration. I am unable to see my WiFi 5 GHz network and can connect only to the 2.4 Ghz band. My router is the Asus RT-N66U. Is there a solution?

  SAL

  I had the same problem.

  If you uninstall the wireless card in Device Manager (select the option to also delete the driver) and then check for changes on the hardware, Windows uses its own built the pilot who can see 5 GHz networks.  It seems that the driver from the Dell Web site is borked.

  My concern is that this driver is not updated, so I would like to know where to get more drivers for this device.

• Windows 10 wifi, works, but can not see my wifi at home

  I have a mac mini in 2012, I installed windows with bootcamp 10, windows different wifi networks are available, the only problem is my own wifi at home never appears.

  -my mini mac detects and connects to my wifi at home very well when running OS X

  -my windows laptop 10 detects and connects to my wifi at home fine

  -various phones/tablets etc connect well

  I tried many things

  -restart the router

  -movement of the router

  -in the Device Manager on windows 10 in bootcamp, everything looks like it is good, there is no exclamation point anywhere, I tried to uninstall and reinstall the wireless drivers, but it makes no difference (wifi networks are available, but not my home wifi)

  I can't really think of anything else to try.

  Someone at - it ideas?

  After some time googling, I fixed this problem by using a web browser to go into the settings of the router and changing the channel wireless from 13 to 10.  my wifi at home and then immediately displayed.

• Officejet2630: Officejet 4630 can't find my wifi network

  Recently moved and so got a new computer and a new internet provider. With the new internet provider comes a new router. When I try to connect my printer on the wifi network, I am unable to do so while it does not appear in the search results. So cannot be added to the network so cannot print using airprint or even via wifi... any suggestions? I tried to manually add the SSID, but again it is not picking it up. I'm at my wits end... any suggestions? !!

  Hello

  What router do you have?

  If it is a Dual Band router, make sure to enable 2.4 GHz WiFi broadcast that the printer does not support a 5 GHz band, such a can prevent the printer to your network.

  The wireless router is located between the printer?

  If make sure that's not too far, but not too close, it is recommended to not place the printer less than 1 to 2 meters from the router...

  Shlomi

• Connected to the wireless network, but can't see all the networks

  I want to look at the properties of a wireless network that I'm not connected, but I can't do this, because even though I am connected to the Internet, some networks are appearing on the list. Please see the image as an attachment.

  

  Hello Nathaniel,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, you are connected to internet but cannot see the wireless network through which you are connected. Perhaps, the reason behind this is that some settings get corrupted. Then try below mentioned methods and see if it helps.

  Have you tried to restart the computer and check the status of your problem.

  Try to run in built store and see if it helps you to solve the problem.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Try to follow the steps described in the article mentioned below and see if it helps you to solve the problem.

  Why can't I find a wireless network?

  If the problem persists you can try the steps provided by Professor Grim replied on January 19, 2012 in the thread mentioned below.

  No display in Windows 7 64 bit wireless network

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Can't see the computer network

  I have two computers running Windows 7 Home Premium 64 bit on my home network. In Windows Explorer under network, n ° 1 sees itself and n ° 2, but no. 2 can't see himself, i.e. cannot see no. 1.  Both can access the internet. The printer is connected to the N1 by USB (we had a lot of trouble at first with Wi - Fi so use cable for this).

  There is no RESIDENTIAL group because I understand there are IPv6 and our router does not support that. I tried the homegroup, but no. 2 could not yet see no. 1. We operate a wireless G network.

  On the computers on that network discovery is and file sharing and printer are on. Protected by password sharing is disabled.

  I saw some comments which may help to a registry cleaning. Could this be true?

  What Miss me? It left me speechless.

  Thanks for your help.
  G

  It's fixed!

  I found another thread in that says something about the zone of confidence in their firewall. I went and looked and BINGO! The name of the area was very different in the name of the wireless network. Now it's the same thing and I have reset certain actions and we are connected.

  Yay! I thank very you much for all your hard work with this in mind.

  Moreover, there is no element of network connections in the control panel in computers. Is that how it should be?

  Graham

• Can connect to the IPSec VPN, but can not see the internal network

  I have several users that can connect to our rooms of ussing IPSec VPN on a 5505. I have a user who can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same configuration that can connect and see the internal network. Newspapers in ASDM show the link, but do not seem to show any errors trying to access internal. Any help will be greatly appreciated. Thank you, Bill.

  Add...

  ISAKMP nat-traversal crypto

• Pavilion 15 with Realtek rtl8188ee can't see 802.11n network

  Hello

  a new Pavilion 15 with the network card wireless Realtek rtl8188ee - all drivers up to date.

  I have a Netgear router which is dual band and there is a network of 11g and 11n.

  I can connect and use the network of 11g all very well.

  But I don't even see the 11n network.

  Any thoughts?

  Hello:

  If you mean that you cannot connect to the 5.0 GHz band, it's because the wireless RTL8188EE is a unique card band (2.4 GHz) only.

• Strangest thing: iPhones can't see the wireless network. Why not?

  Suddenly, an iPhone 5 and an iPhone 6 were not connected to the home network. I thought that the wireless router was to have a hiccup. Reset it and still no. Control a connected computer and internet. Thought that it was a wireless problem, but check the settings (I don't mess with) and they are fine. BUT, I realized my iPad is always connected to the network. IPhones don't even see the wireless network. SSID always broadcast on. I tried to enter the SSID and password manually, but iPhones say that the network does not exist. It's the strangest thing. What would make the invisible network for phones all of a sudden? Both phones are differnet OS running. One is the latest version, probably the previous version. It's a FiOS Actiontec router/router wireless. Everyone has heard of such a thing? I do not understand how it is possible...

  Try this on an iPhone. No matter which even with other iOS.

  Tap settings > general > reset > reset network settings

  You will need to enter the password for Wi - Fi.

• E4500 - can't see PC in network

  Since the upgrade to Cisco I don't see Win7 PC on the network. I don't see the USB attached to E4500, nor that I can see my media server that is based on Linux, or any computuers of Win XP.

  Similar problem after cancellation for me as well. No computers in the "working group" machines (XP Pro SP3) and no action in 'my network places '.

  Have a list of intellectual property reserves and MAC WiFi permissions, I didn't want to hard reset/reconfigure the router once more. What seemed to work properly for me was to change the name of "Workgroup" (XP Pro machines) under 'Computer name' properties, 'OK' my way to the "reboot now?" ask then, without a reboot, go back and change the name of "Workgroup" back to the original one, 'OK' on and then restarted.

  Which returns all my actions and Details of the 'normal' working group and all played well together.

  NetScan showed all the prior IP addresses and all were to ping requests from just showing CMD prompt nothing in task force screens.

  FWIW - I do not run any media or devices other than those of 6 machines WIN7 Pro and 2 XP (and 2 DD - WRT based LinkSys 54Gs) in the network. A laptop with a LinkSys 300N need me to 'force' wi - fi card to connect using my registered by default profile. The auto stand on stocks, etc.. All machines had Internet access as well.

  What I have detailed above has been made only for the local wired network machines on the EA4500. Once this is done, the machines at the other end of the DD-WRTed 54Gs showed correctly as fact those plugged into the router.

  In retrospect, I wonder how it would have worked if I had started with the 'primary machine' that I have configured the router with. Maybe save me a step or two? I do not know...

• How can I remove the WiFi networks list on my mac

  How can I remove the Wi - Fi networks unwanted DSL networks on my i - Mac preferences

  Hello

  You can remove them by going to system preferences-> network-> wireless-> advanced-> WiFi-> and then select the networks you want to remove and press on the "-" button in the middle to the left.

  I hope this helps!

  Jonty