Similar Questions

• Bridge cc can not see my camera

  I use PS CC with bridge for a while now, I've recently updated my OS on mac to El Capitan, I plugged my camera for mac just like always but bridge cannot see the camera. I tried to reset the preferences and using a card reader, but still nothing. Please help, I am a photographer download photos every two days and the need for this sorting ASAP.

  The computer can see the camera is not a problem of usb cable I changed the port and also lead to check. Bridge cc can not see my camera

  I tried a few of these ideas and nothing. However, by chance, that I got my Nikon D800 plugged on the iMac and then plugged my iPhone6 at the same time to get these photos and BANG the list filled with both devices. Wonders will never cease.

• Can't see the camera raw thumbnails in my pictures with windows 7

  I've just updated to a new pc, windows 7 and installed photoshop CS4, downloaded the latest camera raw plug and everything works except that I can't see the thumbnails from camera raw in my photos.  Thumbnails appear in the bridge.  I use the canon 40 d and 7 d.  Can anyone help with this?  Thank you.

  Windows does not display thumbnails for RAW files unless you have installed the codec in windows to generate.  I'm using the FastPictureViewer codec pack on my windows system to generate thumbnails for RAW and PSD files im windows system the dialogues as Explorer files, file open, file save etc.  There are other codec packages can also be used.

  

• Can't see the camera raw 9 on Lightroom

  Hello!
  I have a Macbook Air, and I have Photoshop CS6 and Lightroom installed 5.7.1. I installed the package of Camera Raw 9 and while I open my Nikon d5500 has been added was images in photoshop, I can't open it in Lightroom. When I see the compatibility 'manipulation of files' section in the Lightroom preferences, I see "Camera Raw 7.1 and later" as the most recent possible. Why I am not able to use the Camera Raw 9 on Lightroom package? How can I fix it?

  Thank you very much!!

  JP

  Hi Andreina,

  Please find below the link to DNG Converter 9.1.1.

  Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1

  Mac

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1

  You can download and install the DNG Converter and convert your raw images not supported in DNG format, so that you can import in the current version of Lightroom.

  Let us know if it helps

  Kind regards

  ~ Mohit

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• MacBook Pro can't see not camera in USB, El Capitan.

  My Macbook Pro doesn't detect USB camera, I see using the information system.  Other items in the USB ports are detected correctly.  It worked with 10.6.x (I think it was certainly pre - 10.6.8 10.6.4,), then I tried and failed to install 10.6.8 and stopped computer detection camera.)  Then I could to 10.6.8 then 10.11.1 upgrade, but it still doesn't detect camera.  Any ideas?  Thank you.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.1

• I can't see my pictures, is to show only an icon

  I can't see my camera raw photos in Adobe bridge for CS6. It's only showing me an icon where pictures should be.

  Hisheaphoto

  Thanks for posting on the Adobe Forums.

  Please see generic icons | Files camera raw | Adobe Bridge

  Concerning

  Assani

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• Toshiba Gigashot A100 FE can't see videos on the monitor of the cam

  Hello
  I have a big problem with this camcorder.

  All of the programs that I cannot read the Hd support and if I connect MY camcorder to the TV, it seems very broad and I don't see any screen that appear on the LCD of the cam.

  The program comes with the bug of cam with 2 PC with Vista and XP.
  I can t see my work except in the cam monitor

  Help me, if there is a solution
  Excuse my English bed I m from France
  Thank you

  Hello

  Have you checked the cam settings? There you can set TV out and choose between 16:9 and 4:3 output. You have a 16:9 TV?

  > The program bundled with the bug of cam with 2 PC with Vista and XP.
  Sorry, but this is not understandable to me. What so you mean exactly? You have access to the data and if you connect your can on the PC?

• detection cameras two PB GigE with MAX on the same pc

  I installed on the same GigE camera for two PCs, each device has its own interface card (IP), but only a camera in dtected with max.
  cam0 sometimes and sometimes cam1. I have to wear each camera fixed an IP address, but still only the camera is detected.
   
  My question is how to do the configuration to appear the two camera at the same time with max.
  I use the version of MAX 5.3
  NEITHER IMAQDX 4.0
  You think even match for your help.

  Are you running Windows XP? If, therefore, due to limitations in the underlying OS stack, you will need to place the cameras in different subnets or to fill the two devices together in one virtual device (preferably) NIC.

  Eric

• Can't see category IVI in MAX

  Hi all

  I had a problem with MAX and IVI

  I installed IVI Compliance Package 3.3 and I can see the 'Software' section I have MAX, but I do not see the IVI category in MAX.
  What can be wrong? I tried to repair my installation with no result.
  I also got these programs installed:

  The shared components of IVI
  IVI COM components Standard VISA
  National Instruments IVI of the specific drivers
  National Instruments software

  BTW, what do you thing to use the IVI rather off VISA drivers?

  I hope you can help

  Best regards
  Bjarne

  Hey Bjarne,

  You can try to remove the installation of IVI Compliance of add/remove programs.

  Reset.

  Then download DAQmx8.8: http://joule.ni.com/nidu/cds/view/p/id/1085/lang/en and install it (doing so you're upgrading MAX aswell).

  Reset.

  Install new IVI Compliance Package 3.3.

  Please let me know how it goes.

  Thank you!

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  ====================================
  The following freeware may be able to recover the
  pictures that have been deleted from your memory card...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva downloads (versions)
  http://www.Piriform.com/Recuva/builds
  (Download the Slim version)

  If you have been recover files deleted from your hard drive
  Player... the best bet would be on a Portable version
  memory card or a Flash drive. (reduced risk of)
  overwrite deleted files)

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  Recuva - indicating what to look for
  http://www.Piriform.com/docs/Recuva/using-Recuva/advanced-mode/specifying-what-to-search-for

  Taking pictures more should create a new folder DCIM
  on your memory card.