Can't seem to get the center of work or even installed solutions.
I recently bought and installed a printer Phot0smart 5520. Everything has been successfully installed and printer is operational. However, the Solution Center recently stopped working and says a file had yet to be installed. I am sure that the Solution centre worked after the printer has been installed and I even pinned to the Windows toolbar. I tried to reinstall the printer driver using the CD. Still no Solution Center. I uninstalled the old Center of Solution I got for my old printer HP 5209 thinking maybe that was the problem. Then reinstall the new driver but the same question. I did it about 4 times now and also tried to use a web HP driver instead of the Conference on disarmament. Still no Solution Center. Running window 7 64-bit edition. Printer still operational BTW. I looked in CD files to see if I could locate the file/program for the Solution Center, but could not identify. any help appreciated.
jason_h
I did and it works now. Assistant printer installed, print works normally. many congratulations for the help.
Tags: HP Printers
Similar Questions
-
WndOws XP install problems with Lexmark X 2480 printer no cd
Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480. Downloaded, but prints blank pages.Hello, ColoChick,
Your question must be posted in the hardware and drivers Forum. Note the drop-down menus...
http://answers.Microsoft.com/en-us/Windows/Forum/performance
Search for drivers for your Lexmark printer. The complete set is recommended for a full installation.
You can also try the universal print driver
http://www1.Lexmark.com/en_US/software/UPD/index.shtml
If possible, contact Lexmark for the installer of physical media (CD)
Q: How can I contact the Lexmark parts?
R: customer support is available Monday - Friday from 09:00 - 18:30 AND
E-mail: * address email is removed from the privacy *
Phone: 1-877-577-2787
Fax: 1-800-258-4880 -
Windows Easy Transfer of 64-bit to 32-bit, or vice versa
HelloI'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want. My machine is 64 bit, but the VM is 32-bit. I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...
How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?
George George P Botuwell, programmer
Hi George P Boutwell,.
Thank you for using answers Forum.
I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can't seem to get the driver for my printer HP Officejet 4500 G510n-z... error message is displayed when using the floppy... same error message when trying to install it directly from the HP website for downloads but will not be installed, then uninstall everything... crossed suggested all the patches that were sent as responses to the problem... .very frustrated... somebody please help! I heard maybe Windows 7 (have the Pro version) may need to be reinstalled... don't really want to go there...
Error code:
Error Code of Situation: 17669436
+ 00000000000000042819584 | s | Now Launching = X:\hpzpr|40.exe - inf m
"preload_productdrivers - I XXX f"X:\hpwins28.dat"- no validation of the.
-Validate the No.
SetupINFsListedInDatFile failed with fatal error during installation.
exit code = 1603
Do'nt listen to what you have heard - re reinstall
Its caused by a program or a service that runs on your PC and can be exasipated if you have utilities maintenance party installed, usually called "optimizers" and prevents installation
Clean, start your PC, http://support.microsoft.com/kb/331796 then try the installer complete on hp site.
See also to support HP;
Click 'Start', type in the search field and click 'OK ':
msiexec /Unregister
Then follow these steps to temporarily remove all unwanted processes to the system startup:
«Click 'Start', and type msconfig in the search box-> click on the 'start'-> click on 'Disable All' now-> click on the 'Services' tab-> click on "all Microsoft Services show"-> click on ' disable all '-> click on ' apply 'and' OK '-> you restart PC-> after the restart, it is a request-> confirm you set the hook and click OK.»
You can activate the process later in the same way (after successful installation of the software).
Now again click 'Start', type in the search field and click 'OK ':
msiexec / regserver
Now launch your attempt to re-setup.
-
Can't seem to get the pass has expired the trial even if I bought a map of the page.
I use a macbook. I bought the complete student and teachers plan package, but I do not seem to get pass the trial join now expired page. Whenever I have install my creative cloud software I get the free trial of the software and for some, he told me that the trial is expired and it gives me two options, one to Join Now (which I already did; I got a plan) and the other is to put the licensed software, and since I registered online, I don't have a serial number so I don't know where can I use the code. I tried everything, uninstalling and reinstalling software, for signature in both the cloud creative and site software online. I don't know what we can do. I bought this plan last night and I need urgently the software.
Please try below steps
Launch any product of creative cloud and click on this software license, then do not choose my Adobe ID and log
If she always asks the serial number, then check that your hosts file once entries
Open the link below and see step 3
Log, activation, or connection errors. CS5.5 and later versions
-
This must be a simple process, as I've done it before on other computers-, but the icon in my dock as a "?", I click on, and then it opens on Fox/World icon. As soon as I stop the computer - disappearance of the Firefox icon.
Hello ajsviridoff,
Please contact the Mozilla Support. If you run Firefox in Launchpad you get the correct icon in your dock? If she doesn't simply you right-click on the icon, click Options, and then keep in Dock.
Please let us know if this solves your problem.
See you soon,.
Patrick -
I was able to get the driver and the ut6ilize my HP Laser Jet 4 L printer. Since my hard drive had to be replaced, I was not able to get the LaserJe6t from HP again 4L printer driver. Help!
With the help of a very knowledgeable Microsoft Tech, I was able to get the driver for my printer HP LaserJet 4 L printer. It is listed on page 6 of 6 Iin the CATALOG.COM UPDATE from MICROSOFT.
Hope this helps others, I know that this quest for the pilot was long and painful, but my trusty printer prints well!
Good luck, Pat
-
Can't seem to get the app to download on my windows pc
Hello I paid for the month to indesign app last night and can't do on my windows computer. When setup initialization appears it only stays on the screen for a few seconds, then disappears and nothing happens. Can someone help me please as soon as possible!
Hi Amyk85233374,
Please follow the troubleshooting mentioned in the link below:
-
I installed recently to create a DVD menu for a project and we wish you a menu actions.
I downloaded the Adobe Encore CS6 functional content but it is not filling in the library field. I must be missing a step, does anyone have any suggestions?
Follow this link - https://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
Scroll down and follow the directions to download, extract and install it-
Additional solution: install the contents of the Library Resource Centre
You will get all the pre-made menus, buttons, etc.
Thank you
Jeff Pulera
Safe Harbor computers
-
Can't seem to get the ID of the last inserted record
I'm fighting to get the auto-increment the query ID.
I need the form to be submitted and on the same page, view the token ID (deuxieme in the last line of code below).
Here is the code:
<? php require_once('Connections/connection_mysqli.php');? >
<? PHP
If (! isset {})
session_start();
}
? >
<? PHP
Download MM_USERNAME modules.
$sessionusername = $_SESSION ['MM_Username"];
$u_sql = "SELECT * OF USERS WHERE username =" "." $sessionusername. » ' « ;
$u_query = $con-> query ($u_sql);
$u_row = $u_query-> fetch_assoc();
Define user variables.
$u_id = $u_row ['id'];
$u_username = $u_row ["username"];
$u_firstname = $u_row ["firstname"];
$u_lastname = $u_row ["lastname"];
$u_email = $u_row ['email'];
? >
<? PHP
Set e-mail support variables.
$s_user_id = $u_id;
$s_username = $u_username;
$s_firstname = $u_firstname;
$s_lastname = $u_lastname;
$s_email = $u_email;
$s_userlevel = $u_row ["userlevel"];
$s_subject = $_POST ["subject"];
$s_message = $_POST ['message'];
$s_status = "pending";
Submit in support table.
{if (isset($_POST['submit']))}
$s_sql = "INSERT INTO support (user_id, username, firstname, lastname, email, subject, message, status) VALUES ('$s_user_id', '$s_username', '$s_firstname', '$s_lastname', '$s_email', '$s_subject', '$s_message', '$s_status');
$s_query = $con-> query ($s_sql);
}
$last_id = $con-> insert_id;
? >
Take another look at your code. The value is assigned to $last_id, but the PHP block in your div uses $lastid. Put in underscore, and it will work.
-
I can't seem to get contact 3D to work
I can't get contact 3D to work. What I need to change settings or it should work automatically?
Go to settings | General | Accessibility | Tactile 3D
Make sure it is on, and then you can set the sensitivity and test it.
-
I can't seem to get scrolling effects to work
Somehow I can't get scrolling effects to work. Menu scrolling tells me that my page needs a break point set until I can use scroll effects. What this means and how can I do? I have already set a picture as fill for browser and to scale to fill.
For the moment, it has no effect on sensitive pages scroll.
Scrolling effects only work on pages that are not fluid and have a single breakpoint sets.
Right-click on the breakpoint bar and look at the properties.
If this explantion is not enough, use the command search at the top of this page (you'll find tons of answers to your question) or have a look here:
-
Don't know what happened, but I have no sound on my computer. I have the microphone in the taskbar and when I click it it is 100% how can I get sound
HELLO Shirley,
Here are a few steps that I want you to try:
If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.Verification of the sound settings
Click on Start , then Control Panel
Select the material and audio and noise
Under playback.. What icons you see?
Click Properties and then click headset/speakers
According to the levels... is at 100% and not CUT?
Under Advanced... What is the default format?
Click test... do you get a sound?Reinstallation of Windows Media Player
Go to "turn on or off Windows features.
* Disable features Media: Windows Media Player
* Reset
* Provide characteristic Media: Windows Media Playerhope this helps,
Eddie -
Function of @Allocate can't seem to get the right syntax
Hi friends,
I need to make a linear distribution (all equal amounts) of value has prompted at least (for a given combination of year-round version scenario entity etc.)
I'm yeartotal-quarters and months.
I can't use the usual period of spread I need produce whole numbers and the standard distribution introduced decimal numbers.
I thought I'd be able to use @allocate to do something like that, but I'm having trouble him to validate both calcmgr and eas with what I thought was a pretty simple attempt, that is, difficulty on the account will be allocated and relevant narrowing and then assign a value to the range of months using propagation and rounding and applying the difference to the higher member or the first in the range:
DIFFICULTY (' 21 ',' e080201 ', 'HSP_InputValue', 'FY11","Local","Run business', 'Mensualización 1', "YearTotal")
@ALLOCATE (12000, @levelmbrs(Period,0), Monto, spread, SKIPNONE, roundAmt,-3, errorsToHigh);
ENDFIX;
.
But I get a syntax error: error: 1012000 syntax not v lida. None are un comando c calculation [@ALLOCATE].
I'm at my wits end. Anyone know what I'm doing wrong here and if allocate work even for what I try to achieve?
If not what other submissions do something like this don't you have?
I need to come up with more later as well guests to make the amount a variable and the range invited as well, but for now if I pass it I'll be happy.
AgneteHello
'Re missing you the 4th parameter. Also try to put a member in the left part of the equation.
Try 'Member' = @ALLOCATE (12000, @levelmbrs(Period,0), Monto, propagation, SKIPNONE, roundAmt,-3, errorsToHigh);
Note the comma before "propagation."
Thank you
JM -
Can't seem to get the hand cursor happening.
To the right;
I struggled to get a hand cursor on my MC for pic4_mc, pic14_mc and pic1_mc. They are processed photos in MC with function to act as a btn as3. Perhaps, I put the script:
(myMC) .buttonMode = true;
(myMC) .useHandCursor = true;
in the wrong place...
Here is my script for a Web site, that I do... It is perhaps not the right way to do the script, but the feature seems to work (to hand for the cursor hand) so please forgive me if this seems in every sense.
/////////////////////////////////
Stop();
PIC of cleaning services
pic4_mc.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler_5);
function fl_MouseOutHandler_5(event:MouseEvent):void
{
pic4_mc.Alpha = 0.5;
trace ("Moused over");
}
pic4_mc.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler_5);
function fl_MouseOverHandler_5(event:MouseEvent):void
{
pic4_mc.Alpha = 1.0;
trace ("Moused over");
}
PIC of the maintenance of the garden
pic14_mc.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler_6);
function fl_MouseOutHandler_6(event:MouseEvent):void
{
pic14_mc.Alpha = 0.5;
trace ("Moused over");
}
pic14_mc.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler_6);
function fl_MouseOverHandler_6(event:MouseEvent):void
{
pic14_mc.Alpha = 1.0;
trace ("Moused over");
}
Photo of the handyman
pic1_mc.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler_7);
function fl_MouseOutHandler_7(event:MouseEvent):void
{
pic1_mc.Alpha = 0.5;
trace ("Moused over");
}
pic1_mc.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler_7);
function fl_MouseOverHandler_7(event:MouseEvent):void
{
pic1_mc.Alpha = 1.0;
trace ("Moused over");
}
function of home btn
home_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
{
gotoAndStop (1);
}
Btn cleaning Services function
pic4_mc.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);
function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
{
gotoAndStop (2);
}
Function of garden maintenance btn
pic14_mc.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
{
gotoAndStop (3);
}
Function of Handyman btn
pic1_mc.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
{
gotoAndStop (4);
}
quote_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
{
gotoAndStop (5);
}
gallery_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
{
gotoAndStop (6);
}
contact_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
{
gotoAndStop (7);
}
/*************************************
QUOTE FORM
**************************************/
sendbtn.buttonMode = true;
sendbtn.addEventListener (MouseEvent.CLICK, submit);
resetbtn.buttonMode = true;
resetbtn.addEventListener (MouseEvent.CLICK, reset);
init();
/************************************
the button behavior
*************************************/
/*************************************
Necessary variables
**************************************/
var: timer;
var varLoad: URLLoader = new URLLoader;
var urlRequest:URLRequest = new URLRequest ('mail.php');
urlRequest.method = URLRequestMethod.POST;
/*************************************
Functions
**************************************/
function init (): void {}
Set all fields empty
yourName.text = "";
fromEmail.text = "";
yourSubject.text = "";
YourMsg.text = "";
}
function submit(e:MouseEvent):void {}
Check if a field is empty
If (yourName.text == ' ' | fromEmail.text == "" |)
yourSubject.text == ' | YourMsg.text == "")
{
Valid.Text = 'all fields should be filled.';
}
Check if you are using a valid email address
else if (! checkEmail (fromEmail.text))
{
Valid.Text = "enter a valid email address";
}
on the other
{
Valid.Text = "Send on the internet..." » ;
var emailData:String = 'name =' + yourName.text
+ "& from =" + fromEmail.text
+ "& subject = ' + yourSubject.text
+ '& msg =' + YourMsg.text;
var urlVars:URLVariables = new URLVariables (emailData);
urlVars.dataFormat = URLLoaderDataFormat.TEXT;
urlRequest.data = urlVars;
varLoad.load (urlRequest);
varLoad.addEventListener (Event.COMPLETE, thankYou);
}
}
function reset(e:MouseEvent):void {}
init(); call the original function of claire
}
function checkEmail(s:String):Boolean
{
This tests for correct email address
var p:RegExp = /(\w|[_.\-])+@((\w|-)+\.) + \w{2,4} +;
var r: Object = p.exec (s);
If (r is nothing)
{
Returns false;
}
Returns true;
}
function thankYou(e:Event):void
{
var loader: URLLoader = URLLoader (e.target);
Envoy of var = new URLVariables (loader.data) .sentStatus;
If (send == 'Yes')
{
Valid.Text = "thank you for your e-mail!"
Timer = new Timer (500);
timer.addEventListener (TimerEvent.TIMER, msgSent);
Timer.Start ();
}
on the other
{
Valid.Text = "Oh no!" Something is wrong! Try again... « ;
}
}
function msgSent(te:TimerEvent):void
{
If (timer.currentCount > = 10)
{
init();
timer.removeEventListener (TimerEvent.TIMER, msgSent);
}
}
Kind regards
Dean
Google this:
Flash Player 11.2 r202.233
Mac OS X 10.7.3 / Safari 5.1.5
Known issue: the cursor does not change to a hand pointer by positioning the mouse on the TLF links as buttons and clasps active (3060839).
Try to test Chrome/FF, if the needle shows, its definitely the combination Mac/safari.
Maybe you are looking for
-
What is the latest version of Mac OS x that runs on MacBook 2.1?
What is the latest version of Mac OS x that is actually run on a MacBook 2.1? Thank you
-
Toshiba Satellite manual XDVD2750 required
Hello.I need the manual for my old Toshiba. I would have downloaded, but I could find on the internet or on the Toshiba download site. I need the manual to read the vertical refresh and horizontal sync rates.I would be very grateful if you could find
-
Satellite 4090CDS: is it possible to install Windows XP?
Hello I am aware that the requirements for Win XP is hardly encountered a Satellite 4090 CDs, even with my extension memory of 192 MB of RAM. However, a few years back put us Win XP on a machine that has been much slower than 400 MHz and had no probl
-
HP pavilion g7: gpt partition
I format the c drive try to install 8.1 partition butwindowsdvde dvd on the drive selected for installation are not in the recommended order. For more information on the installation of GPT disks, go in search of TPG Microsoft (www.microsoft.com ) We
-
Why my computer is running slowly even when I do not have a virus?
I find the virus and there is none. but my computer is very slow