Can't start Bios or something else.

Similar Questions

• Pavilion G6: HP Pavilion g6 laptop keyboard suddenly doesn't and can't start BIOS

  Hello

  I have a laptop that had not been booted in perhaps over two years. Startup, it seemed to work OK. In particular, he has no problem with the keyboard. The only thing that could have triggered a problem is that this hard wy wife shut it down by holding the power button. Boot once again the keyboard does not work.

  External keyboards work fine. The touchpad works very well. Interestingly, the keyboard function keys work fine for the deactivation or activation WiFi, setting screen brightness or volume, change the display and so on.

  There is a prompt when the powers of first system on the effect of something like "press F1 to system information.

  The system information screen then loads if you press F1.

  This screen then ask something like "press Esc to exit. Sometimes pressing ESC works (especially if I just removed and replaced the battery) and other times it does nothing and I have to use an external keyboard.

  This means that I can't enter the BIOS by pressing ESC just lance Windows.

  I tried upgrading the BIOS. In Device Manager, everything looks OK, but the keyboard is reported as a PS/2 keyboard that seems a little odd.

  Hi @Mark_OB,

  Thanks for getting back to me.

  As you say what happens before Windows starts, so I did not thing is drivers.

  The last number on the document I sent you show how to remove the keyboard and clean it.

  Please try and get back to me.

• Can I use TNSNames (or something else) to redirect users (patterns)

  Hello
  
  This discussion revolves around low priority dev databases, not the production. on windows 2000 10 gr 2.
  
  We have about 20 databases only on a few servers. Needless to say, this puts stress on the system. The problem is, the application uses a schema_name specific work and there is no way for our application to switch to another scheme.
  
  That said I would do, if possible, is to take all of our databases and put them in a single database, separated by schematics (db1, db2, db3 etc.), so that we can put all our resources of servers in a single oracle, instead of 20 times power instance.
  
  Because the schema is hard coded in the application, what I hope to do is trick the app into thinking that it connects to the schema that it is coded in hard for, but in reality we have redirected to talk to another scheme without the app knowing that we have done.
  
  Is this possible?
  perhaps through tnsnames where we would say:
  If a connection is entered and the user, it connects as the schema is for db alias db1, then we will connect this user as a scheme B instead and tell the database to operate only in diagram B even when the connection exlicitly calls for work to be done in the scheme has.
  
  
  I am positive, the answer is no, but I thought that if someone would have a creative response, I could take your mind.

  Since you call SQL who fully uses the names of tables, is not possible.

  It is generally a good thing in my book. If I was ever troubleshooting why a SQL statement wasn't working properly, I'd be powerful angry if Oracle allowed "HR. EMP"to designate the table EMP in schema of BAR and not in the HR schema.

  Justin

• Satellite A300 (PSAJ0E) - update after the BIOS, I can't start

  Hello

  I have an A30, and I tried a bios update to 4.2 which is the latest version for my model. BIOS update went well spent, that it prompted me to restart the laptop once the process is complete, but after this, I was not able to start. I made the screen where I can enter the BIOS Setup (that I can actually do and I am able to change the settings and save them) but after that the screen goes black and it crashes.

  At first, I thought I did something wrong and upgrade does not work well, then I started looking for the bios crisis recovery methods, I found this article:
  http://CRD.Y1.cc/
  After the steps, I managed to get my USB floppy drive works and, hopefully, flashing the BIOS, but it didn't help it would always hang at the same stage.

  My laptop has a warranty expired, so I can't fix it for free, and the service will probably cost me half of its price. Is there anything else I can do to get it fixed?

  I thought to Flash an older version of bios - perhaps the last 4.2 is not really compatible with my model, but I couldn't find everything... is it possible to get an older version of bios and give it a try with a floppy drive?

  Thank you
  Anton

  *@DCRM*
  You have a laptop A300D. It s a series different and, therefore, you couldn't t use the BIOS files designed for A300 series!
  This may damage the module ROM and mobo!
  You can find the latest version of the BIOS on the Toshiba European page of the driver... otherwise, you will need to contact the ASP in your country for assistance, or an older version of BIOS.

• It takes 5 minutes to start to the internet, I think that something else is running when you start

  When starting my computer, the internet takes 5 minutes to get running .i think of something else is running in the background, I'm not that. then when I finnally get on the interniet, he died suddenly. This goes on all day. can someone help me find a solution. Dean of the thanks

  Sorry, but clarification, hear you the browser takes a long time to start and connect, or the actual Internet connection takes a long time to set up (wireless link maybe) and dips?

  What browser are you using IE9? If so, try another browser as a test as FireFox

  It could be Malware so eliminate this possibility first. To update your AntiVirus and scan and then download, install, update (updated by right-clicking on its icon and 'run as administrator' then go in the tab) and run a scan with Malwarebytes.

  Does this help?

• Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Sheman salvation,

  What do you mean by "creates a lot of e-mail account on the same computer?

  I mean after connect hotmail.com let's say, after uttering the 1st email account, so I create another and one more, etc...  can affect the performance of the computer or something else?

  I know that with 1 or 2 email account is sufficient, but I just want to know by I have

  can affect the performance of the computer or something else?

  stuckfree,
  Who is 'Sheman?

  What about your further explanation - it can affect the performance of the computer?

  Together?  Only if you're so low disk space (almost out - the figure even single or double megabytes (MB) area) that everything is affected.  Otherwise - the only performance can affect the messaging application, you use as it POP3, IMAP, Exchange, etc. connects to different e-mail providers at the same time, you need to get your e-mail.  I have three to five settings of accounts on each of my systems (or accounts Hotmail, Gmail, or accounts, corporate, local accounts or accounts ISP, etc.) in Microsoft Outlook and don't encounter any problem.

• Windows Media Player not play either allow me to record a few songs that I download on limewire. Some are AVI or THE or something else. I want to know can I install so this media player allows me to listen to and record.

  Windows Media Player not play either allow me to record a few songs that I download on limewire. Some are AVI or THE or something else. I want to know can I install so this media player allows me to listen to and record.

  Windows Media Player not play either allow me to record a few songs that I download on limewire. Some are AVI or THE or something else. I want to know can I install so this media player allows me to listen to and record.

  The link below shows list you formats supported by Windows Media Player, audio and video.
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0071.mspx

  If you downloaded something not supported by WMP, then you will have to google for a converter. There are many FREE online converters.

  t-4-2

• Old computer is dying. You had to buy a new computer. Can I just download my Adobe Acrobat Pro XI on the Adobe site after signing in, something else, or do I need special permission to put it on a new computer, because it costs much $$s? Thank you. Need t

  Old computer is dying. You had to buy a new computer. Can I just download my Adobe Acrobat Pro XI on the Adobe site after signing in, something else, or do I need special permission to put it on a new computer, because it costs much $$s? Thank you. Need to know as soon as possible since the store will be to transfer my data to the new laptop.

  Moving to this discussion on the Acrobat Installation questions & put forum to date.

  Jessem89886042 if you need to download the installation files for Acrobat Professional XI retail, they are available at download Acrobat products | Standard, Pro | DC, XI, X.  You can also find details on how to locate the serial number to quickly find your serial number.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• Can I use the awesome < s:AnimateTransitionShader in something else that changes of State

  Is it possible to use the < s:AnimateTransitionShader in something else the state changes as theres pb cool stuff you can do like here: http://www.justsuppose.com/getting-fancy-with-Flex-4/

  < s:transitions >
  < s:Transition fromState = "" * "toState = 'log_in' >"
  < s:AnimateTransitionShader target = "{}" duration = "1000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/HexCells.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  < s:Transition fromState = "" * "toState =" * ">"
  < s:AnimateTransitionShader target duration = "{logo}" = "3000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/Twist.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  
  < / s:transitions >

  Hello

  If you just want to use pixelbender filters you create a task of shader and use any animation you want...

  http://gumbo.flashhub.NET/menu/ this example uses a filter for the melted cross effect

  http://gumbo.flashhub.NET/reflect/ that uses a pixelbender filter in a skin to create a reflection effect

  David.

• You can change the color of the "carpet" around the video from black to something else?

  Hello trust experts!

  Is it possible for me to change the background color in my video of black default to something else? My video is a screencapture of a widget on a solid gray background. What I'm trying to do is some pan and zoom on some features, but when I need to zoom near the corners, his watch the black carpet around the video. Is there a way to change this color?

  If by "cache color" you mean letter-boxing, or pillar boxing, then the answer is Yes. Just add a cache of color on a video track below and its color based on the value.

  Good luck

  Hunt

• I can't start windows, it says system32\config\system is damaged or missing I tried consol recovery and boot to the top of the cd

  I can't start windows, it says system32\config\system is damaged or missing I tried the recovery console and

  boot from the cd that it won't start any ideas?

  I cannot directions all of the Support Engineer.  It's just a Bing search engine and a link to an article.

  You need to work with someone who has actually really seen and corrected this questions a few thousand times in the real world.

  You must first start by entering in the XP Recovery Console and running a chkdsk/r from there.

  If you do not have a genuine XP bootable installation CD from which you cn safe in the XP Recovery Console or you are not sure that you have a bootable CD, make a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r there.

  Here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Messed up graphics card, now I can't start windows. .

  Messed up graphics card, now I can't start windows. said the plug to the/windows/system32/system address, or something like that, is missing or corrupted. said to run the installation disk, I don't have it. Needhelp, VERY VERY important files on my drive.

  Installing ubuntu natty to edit files, but I would have my back configuration, all that. anyway to fix it?

  NEVER begin to solve this problem with KB307545, and if you have no disk, you won't get a lot anyway.

  I guarantee engineers from Microsoft technical support that I can recreate this problem to approximately, half break you in 1 minute your XP CD and then you put challenge to fix it without the help of KB307545.  It is unlikely that the manufacturer will send you an XP installation disc.

  Looking at HP/Compaq, Dell and IBM just today, they say generally that they have stopped shipping XP CD in 2005 (6 years ago) and you can't order them on their website or through the support.  But sometimes you can get a part number and buy a CD to install XP from third-party suppliers to find research on the Internet.  Prices range from $49 to $ 200 USD.

  Knowing this, maybe it's time to STOP suggesting how to contact the vendor for installation of XP Media?  It's a good 'out' when you don't know what to do, but this isn't a useful suggestion.

  It could facilitate a resolution of the problem faster with less cycles message if you are trying to tell us you see the exact error message.

  Is this something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  If you want to use Ubuntu or something similar to copy your important files to a safe place, it is a good idea, but you should always be able to repair your XP system.

  What you need to do is to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r on your system.  Here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Can not start my Qosmio - RSC Server is unavailable

  firstly my Qosimo has turn the thetime all

  Finally he did while I liked Internet

  Now when I try to start it tell me that the server of the CBC is not available and does not allow me to log in

  I tried the bootingit insafe mode, but get to the same point
  Why he's looking for a wean internet

  How can I get around this so it starts again?

  Thank you

  Can you please tell us what model of laptop do you have?
  I want to know because I would like to know if you have an older model.

  On this virtual path, it is not easy to say why your laptop turns off. Don't you think that it may be an overheating of the issue or something else?

  In my opinion, you should do a cut and don t waste your time to seek to obtain the OS works correctly. Might be time for clean operating system installation. Use the original Toshiba recovery disc and reinstall the OS. After that make you own OS functionality and test preinstalled with settings.

  It will be interesting to know whether or not this closure issues will continue.

  What do you think of this?

• Satellite Pro A300 he can't start WLan - Fn + F8 key problem

  Hello

  I have a wireless satellite pro a300-1nt model problem... I have instaled win7 ultimate (32 bit) and and all the Nice work, except that... in the household of wireless device is all ok, windows recognizes the card, he said all work perfectly... but when I try to start it, nothing happens. When I try to solve the problems they say "WiFi is disabled" and something like "Use the power switch on the front of the computer, or the function keys, if necessary activate wireless", but when I use Fn + f8 nothing happens...

  Now I don't know what the problem... don't know what to do... windows recognizes the card, but I can't start with buttons: (...) I have try all the drivers that I can find but nothing, if someone have similar problem or know something useful, please share... :(

  Thank you
  Aleksandar

  PS Sorry for the bad English

  Hello

  You have installed Win 7 but you didn t install some tools that controls the FN keys!

  You need to install the support card Flash Utility and added value package!
  You can find that both page European driver Toshiba Satellite L500 download area!

  PS: I think you should also check the BIOS settings. Some BIOS contains an option to toggle the wifi.

  In addition, go to-> properties Device Manager card Wlan-> Advanced tab
  Here, you can activate Wlan card too!

• Network card can not start correctly every time that I reboot

  Whenever I stopped my flag and restart the next morning the network adapter should be disabled and enabled to work.  Only the wireless connects automatically. but I do not use the wireless for my Pavilion.  I already reinstalled the software for the adapter and checked the properties of the connection (automatic DNS lookup) IPV4 and I use cable which is permanently on and working properly.  This is hardware problem or something else.

  Hello Biskit2012,

  You don't list what exact make and model computer you use and which operating system you use, you should always include this information when asking for support.

  1. launch Device Manager

  This can be done by typing the Device Manager in the search and selecting the program when it appears in search results. If your computer does not have a search field after you press the Start button and then right click on my computer and select Properties.

  2. navigate to the section of the network card and expand

  3. right click on the adapter, and go to properties

  4. Select the power management tab

  5 uncheck "allow the computer to turn off this device to save power".